Anycubic Photon Printer Owners 造訪社團 » USB

原文網址 Brandon Landin
2019-09-19 23:30:24

Thanks for the add. Been struggling with my Photon just a few days in and have already found some great info in the posts here that will help as that I continue to work through the print failures. I was able to level and print the test print in my first try and I felt like I was set. I keep hearing that leveling is the key and once you've got a good level locked in you should see some degree of success. I assumed that after 1 good solid test print I would have had an easier time, but it's been rough. I assumed it was something with my slicing in chitubox, but I already knew about rafts and supports and printing at 45 degrees. Looks like we'd get through just the few layers of the raft and then nothing. I've re-leveled using the Flint Read method and I also tested UV exposure. Checked/tested the tautness of the FEP. I looks to me like a build plate adhesion issue, but the first print was fine! I've heard USB issues. What are the implications of using the stock USB and it failing? Every print after the first regardless of slicing, level, exposure times and I just get a few layers in the vat. Anything else I'm missing here?

翻譯年糕

Herman Simpson
2019-09-19 23:36:02

Nick Williams
2019-09-19 23:37:28

Brandon Landin
2019-09-19 23:47:05

Brandon Landin
2019-09-19 23:47:15

Brandon Landin
2019-09-19 23:49:16

Nick Williams
2019-09-19 23:49:28

Brandon Landin
2019-09-19 23:52:22

Nick Williams
2019-09-19 23:55:24

Brandon Landin
2019-09-20 07:02:22

Nick Williams
2019-09-20 07:03:01

Brandon Landin
2019-09-20 07:11:46

Nick Williams
2019-09-20 07:38:40

Brandon Landin
2019-09-20 09:44:05

Nick Williams
2019-09-20 09:55:43

Melecio Guzman
2019-09-21 03:59:59

Brandon Landin
2019-09-21 05:28:50

Nick Williams
2019-09-21 05:29:33

原文網址 Hayden David Desailly
2019-09-19 21:40:57

Hey Everyone,

Just got my Photon today and went through setup. The first time I looked through the print menu to have a look all the test prints appeared normally, but now that I'm ready to get started I'm only getting default document icons and nothing happens when I try to print.

Anyone know what's up? I've tried several USB sticks and I tried installing the latest official firmware.

翻譯年糕

Herman Simpson
2019-09-19 21:47:29

Hayden David Desailly
2019-09-19 21:49:10

Herman Simpson
2019-09-19 21:50:18

Amanda Kennedy
2019-09-19 21:51:40

Nick Williams
2019-09-19 21:52:06

Hayden David Desailly
2019-09-19 21:53:17

Amanda Kennedy
2019-09-19 21:56:08

Rory Kostman
2019-09-19 22:38:49

原文網址 Rikard Weijmer
2019-09-19 14:53:36

Soooo, this just happened ? any thoughts?

Anycubic green at 12s/layer
Sliced in chitubox and validated, not using the original usb.

Just bad luck?

翻譯年糕

Dave Booche
2019-09-19 14:56:46

Adam Widdowson
2019-09-19 14:56:48

Rikard Weijmer
2019-09-19 14:57:45

Adam Widdowson
2019-09-19 14:58:10

Jari Ivanoff
2019-09-19 14:58:35

Rikard Weijmer
2019-09-19 14:58:49

Adam Widdowson
2019-09-19 15:00:23

Rikard Weijmer
2019-09-19 15:00:58

Rikard Weijmer
2019-09-19 15:01:17

George Bulte
2019-09-19 15:07:12

Rikard Weijmer
2019-09-19 15:08:18

Jari Ivanoff
2019-09-19 15:11:29

Elle Heilig
2019-09-19 15:12:21

Rikard Weijmer
2019-09-19 15:12:29

Rikard Weijmer
2019-09-19 15:12:47

George Bulte
2019-09-19 15:13:34

Jari Ivanoff
2019-09-19 15:14:53

George Bulte
2019-09-19 15:15:37

Chris Berry
2019-09-19 15:52:30

Rikard Weijmer
2019-09-19 15:59:26

Jari Ivanoff
2019-09-19 16:02:23

Jacob Bolton
2019-09-19 16:26:04

Zena Andreou
2019-09-19 16:44:26

Peter Jarvie
2019-09-19 16:49:16

Andrey Kulkov
2019-09-19 16:52:47

Mark Kozik
2019-09-19 16:56:13

Rikard Weijmer
2019-09-19 17:05:38

Rikard Weijmer
2019-09-19 17:06:25

Michael P. Whilchy
2019-09-19 17:24:58

Ines Silva
2019-09-19 17:32:58

Martin Mjöllnir Umgjer
2019-09-19 17:56:40

Nick Martin
2019-09-19 18:09:38

Michael Zinski
2019-09-19 18:13:47

Eric Wilfreesboro
2019-09-19 19:32:43

Mark Kozik
2019-09-19 19:49:18

Nickolaus Oneal
2019-09-19 19:49:39

Cameron Elvin
2019-09-19 19:55:43

Mark Kozik
2019-09-19 20:15:33

Scott Pavlich
2019-09-19 20:30:04

Alex Vee
2019-09-19 20:45:22

Rikard Weijmer
2019-09-19 20:49:50

Nick Williams
2019-09-19 20:52:55

Alex Vee
2019-09-19 20:56:41

Jari Ivanoff
2019-09-19 21:16:48

Herman Simpson
2019-09-19 21:16:56

Rikard Weijmer
2019-09-19 21:20:35

Herman Simpson
2019-09-19 21:22:33

Rikard Weijmer
2019-09-19 21:24:11

Sally Blu
2019-09-19 21:54:04

Nathan Kopp
2019-09-20 05:02:29

Rikard Weijmer
2019-09-20 05:10:25

Adam Brockmeier
2019-09-20 05:13:21

Rikard Weijmer
2019-09-20 05:14:05

Adam Brockmeier
2019-09-20 05:14:56

Rikard Weijmer
2019-09-20 06:00:51

Davoud Taghawi-Nejad
2019-09-20 06:33:51

Danny Broekhuis
2019-09-21 00:50:11

原文網址 Ruslan Salonen
2019-09-19 02:54:51

It's here ? my first resin printer. And it's a live ?
In USB stick i have only one test file?
Where I can get other files?

翻譯年糕

Michael A Hannah
2019-09-19 02:57:33

Mark Stevenson
2019-09-19 02:57:33

Ruslan Salonen
2019-09-19 02:59:10

Ruslan Salonen
2019-09-19 02:59:19

Sean McAndrews
2019-09-19 03:06:30

Paul West
2019-09-19 03:10:14

David Flynn
2019-09-19 03:11:30

Ruslan Salonen
2019-09-19 03:18:15

Brandon Darnell
2019-09-19 08:16:25

Ben Cox
2019-09-19 09:53:03

Ben Cox
2019-09-19 09:57:56

David Boccabella
2019-09-20 14:50:00

原文網址 Weng Fai Yeap
2019-09-19 01:04:09

I need to ask, I setup a New photon s for my friend. Everything done, but then I open file the screen blank without files and I am pretty sure that the USB is read cause the USB led is light up. I open the photon S and plug the USB direct to the mainboard still nothing show up. Any idea what happened?

翻譯年糕

David Collinson
2019-09-19 01:05:26

David Collinson
2019-09-19 01:06:37

Weng Fai Yeap
2019-09-19 01:08:49

David Collinson
2019-09-19 01:45:29

Weng Fai Yeap
2019-09-19 02:25:20

Georgios Kolotouros
2019-09-20 23:47:39

Weng Fai Yeap
2019-09-21 00:24:13

Georgios Kolotouros
2019-09-21 03:52:13

Weng Fai Yeap
2019-09-21 09:59:24

原文網址 Brandon Taylor
2019-09-18 02:12:34

Does anyone have any suggestions for a usb stick replacement? I think mine is finally going. I've heard several things about certain types of usb and I don't want to get it wrong.

翻譯年糕

Yves Hacault
2019-09-18 02:23:23

Stephen Colin Richie
2019-09-18 02:28:27

Brandon Taylor
2019-09-18 02:33:06

Brandon Taylor
2019-09-18 02:33:15

Brandon Taylor
2019-09-18 02:33:59

Brandon Taylor
2019-09-18 02:34:08

Stephen Colin Richie
2019-09-18 02:34:27

Joel Mendoza
2019-09-18 03:02:05

Chad Elstad
2019-09-18 04:31:52

原文網址 Peter Jarvie
2019-09-17 00:12:18

So all of a sudden my photon wont print
It the touch screen goes a wierd orange colour then stops printing and sometimes reboots
Sometimes it starts the print goes down then just stops has anybody had this or know what is causing it
I have tried using a different usb and it still does it
Could it be a firmware bug maybe an update might help if so what update version would be best

翻譯年糕

原文網址 Nathan Inwin
2019-09-15 03:08:35

Test cube. File from the anycubic website on a new USB. I've tried both paper leveling and Flint Read. This is my third failure. It seems to go good until it reaches the middle of the cube.

Any idea on what I should try next?

翻譯年糕

Graham Rust
2019-09-15 03:18:16

Nathan Inwin
2019-09-15 15:26:20

原文網址 Deven Harris
2019-09-15 02:30:01

Can anyone video chat me quick. I just got my anycubic photon s and I can’t seem to get the file to export onto my usb. The printer won’t recognize and files

翻譯年糕

Henrik Andersen
2019-09-15 02:33:50

Deven Harris
2019-09-15 02:34:30

Henrik Andersen
2019-09-15 02:34:56

Grant Weaver
2019-09-15 02:35:19

Deven Harris
2019-09-15 02:35:41

Deven Harris
2019-09-15 02:36:09

Marco Dieckhoff
2019-09-15 04:58:24

原文網址 Joshua Collins
2019-09-15 01:54:18

Had an interesting error on a recent print, this model, supported in Chitubox and then sliced in the Photon slicer, despite hand verifying each layer, has what appears to be a single frame which misprints. Tried in Elegoo Gray and now in Siraya Tech Fast, never had an issue before with frame shearing (and had other successful no issue prints after), USB is a SanDisk with no issues noted. Model isn't hollow, but the cross section area isn't extreme here, nor does it looks like a typical suction issue. It is a rectangle larger than the build surface.

I'm thinking somehow the file might have some corruption, so I deleted from the USB, resliced using Chitubox, verified the layers in both Chitubox and Photons slicer, and am trying a reprint in Siraya Tech Fast. Releveled when I switched to the new resin last night.

However, figured I bounce it off the hive mind because it's the first such issue I've had.

Grooving on the Fast Resin though, way less fussy/issues than the Elegoo Gray thus far.

翻譯年糕