Anycubic Photon Printer Owners 造訪社團 » TIP

Hey everyone! Check out the base on the pig.. does this mean my Z isn’t level?

I’ve tried leveling it with the paper method a couple of times but I still get this issue, any tips?

Most prints I’ve done so far are coming out alright but occasionally they fail, especially larger prints where the base goes across nearly the entire plate

翻譯年糕

Ok, my first print is done. I hate printing useless test stuff, so I printed a tank. Hollowed in Meshmixer, added drainige holes, 1mm wall thickness. Everything is great, but supports were impossible to remove. I used b9creator, auto generated supports. Since I have 2 fdm printers I thought there is no way those supports could be removed without damaging the model, but thought maybe resin supports could be removed easily. I was wrong and my model is damaged in the track area where supports are dense. Any tips how to make supports easier to remove? Should I orient that model differently? Printed with Anycubic resin that comes with the printer. EDIT: on a related note, Meshmixer now always crashes when I try to generate holes on any model, even tho it worked just fine yesterday lol. Anyone has any idea what the hell ? :-D

翻譯年糕

The first model is a copy of a saxon pendant, the second one is a personal creation inspired by saxon jewellery.
I will try printing the pendant as soon as I get red and blue transparent resin, and if it works I'll try the other one.
What is your experience with multiple parts object ?

翻譯年糕

Hey guys, I have some problems with my cleaning skills... I really want my Tabletop miniatures look perfect after printing, but I am actually not pretty talented. Do you have some tips or tutorials? I mainly work with 28mm miniatures Hey guys, I have some problems with my cleaning skills... I really want my Tabletop miniatures look perfect after printing, but I am actually not pretty talented. Do you have some tips or tutorials? I mainly work with 28mm miniatures 翻譯年糕

Hi all, I have a large print stuck to my bed that I haven't been able to remove even with a lot of physical effort. Does anyone have any other tips for removing builds from the plate?

翻譯年糕

This group is for owners, and future owners of the Anycubic Photon DLP printer.

Resin Exposure tables, FAQs, Known Issues, Community projects and Tools, Tips and more can be found on the group's github at photonsters.org

The photon is a new resin based printer that is challenging the Wanhao D7, FLSUN -S Complete, and Micromake L2 in the desktop resin printer market.

翻譯年糕

So, how are you all cleaning the supports off your prints? I'm finding I either get holes because the support snaps off, or little bumps from cutting and filing the support down. I don't want to sand too heavily or I'll end up sanding away my details! Any tips greatly appreciated :)

翻譯年糕

Does anyone have any tips for plate adhesion? No matter what I try, I can't seem to get my builds to stick to the plate. The clear green resin that comes with the printer worked almost flawlessly, but having switched to anycubic grey, maybe one in twenty prints will actually adhere to the build plate. I've noticed that particularly towards the edges of the plate things have trouble sticking. Does anyone have any tips or tricks to help with this?

翻譯年糕

Off to a bad start. Tied to print the test cube, but must have got the leveling wrong because the plate kept raising and lowering and the print never went past 1%. So stopped print and tried to drain bath, but resin set on the FEP and the side of the bath as I tried to drain it and I found a circle had printed on the FEP. Lost at least half of the resin to setting.

Any advice before I try another print? Also, any way to remove resin from the FEP (already had to replace one as I damaged the original when levelling). Finally - any levelling tips. I followed the anycubic video so not sure where I went wrong?

翻譯年糕

Hi, could you please let me know what is the optimal level of resin in feb container? How to measure this? Any tips?

翻譯年糕