Anycubic Photon Printer Owners 造訪社團 » USB

原文網址 Riley Aries George
2019-11-01 07:00:25

Im having trouble getting any USB to work with my photon without gettting memory error M_1000. Any recomendations? i've tried 4 different USB's fat32 and unchecked quick-format.

翻譯年糕

David J Hayes
2019-11-01 07:06:00

Riley Aries George
2019-11-01 07:06:14

David J Hayes
2019-11-01 07:06:42

Riley Aries George
2019-11-01 07:09:13

David J Hayes
2019-11-01 07:11:20

原文網址 Mike Nye
2019-10-31 11:06:09

Hello new friends,

I've recently taken delivery of a shiny new Photon printer. Last night I set the printer up, thoroughly cleaned everything with IPA, levelled my build plate (paper method), filled with the "Eco Resin" that was included with the unit and attempted to print the test print on the included USB thumb drive.

As you can see from the image, the print failed. :(

After some googling and reading ( https://l3d.ie/2018/06/29/dlp-3d-printing-troubleshooting/ + this facebook group), I think the culprit is exposure time too low. I realise now I should've opened the test print in ChiTuBox or Photon Slicer and configured with different exposure settings to suit the "Eco Resin" that was supplied with the unit, instead of trusting the defaults...

Is this likely the only issue? Being a first timer I'm not sure...

I will consult the big resin settings spreadsheet, and possibly download and try this: https://github.com/altLab/photon-resin-calibration

Any other tips would be greatly appreciated.

Thanks!

Kind regards,

Mike Nye

翻譯年糕

Elle Heilig
2019-10-31 11:11:59

Mike Nye
2019-10-31 11:15:52

Elle Heilig
2019-10-31 11:16:58

Elle Heilig
2019-10-31 11:17:24

Mike Nye
2019-10-31 11:18:09

Elle Heilig
2019-10-31 11:21:29

Steven Howland
2019-10-31 11:30:43

Mike Nye
2019-10-31 11:31:13

John Chrapkowski
2019-10-31 11:32:33

Steven Howland
2019-10-31 11:33:18

Elle Heilig
2019-10-31 11:34:05

Mike Nye
2019-10-31 11:34:34

Mike Nye
2019-10-31 11:34:59

Ben Zeeman
2019-10-31 21:41:20

原文網址 Bruno Reyes
2019-10-31 08:58:35

Hello, I am new to this, I just bought my anycubic photon s printer and I have problems with the usb reader, any help if they are so kind? Thank you.

翻譯年糕

Andrew M Dunlap Jr.
2019-10-31 09:02:19

Fifa Mia
2019-10-31 09:02:53

Savio Ku
2019-10-31 09:04:45

Bruno Reyes
2019-10-31 09:08:26

Jim Nelson
2019-10-31 09:08:56

Bruno Reyes
2019-10-31 09:09:32

Jim Nelson
2019-10-31 09:16:33

Spiller Alessandro
2019-10-31 09:38:16

Bruno Reyes
2019-10-31 09:52:23

Ivan Adhi R
2019-10-31 09:53:42

Ivan Adhi R
2019-10-31 09:58:11

Jim Nelson
2019-10-31 10:33:10

Bruno Reyes
2019-10-31 10:34:23

Ivan Adhi R
2019-10-31 10:38:46

Bruno Reyes
2019-10-31 10:43:09

Darren Ng
2019-10-31 11:05:46

Bruno Reyes
2019-10-31 11:24:45

Ivan Adhi R
2019-10-31 11:43:12

Nigel Cuppari
2019-10-31 11:47:31

Erick Blount
2019-10-31 11:53:34

Bruno Reyes
2019-10-31 12:16:18

Bruno Reyes
2019-10-31 22:54:58

Justin Lincoln
2019-11-01 00:53:05

Budiarta Komang
2019-11-01 01:00:31

Bruno Reyes
2019-11-01 11:50:27

Bruno Reyes
2019-11-01 12:31:56

Stephanie Frances Tilson
2019-11-02 03:10:17

Stephanie Frances Tilson
2019-11-02 03:11:10

Efrain J. Perez
2020-01-09 03:04:06

Bruno Reyes
2020-01-09 03:10:19

Stephanie Frances Tilson
2020-01-09 21:06:29

Stephanie Frances Tilson
2020-01-09 21:07:19

Nicolas Tsagarides
2020-01-09 22:13:59

Nicolas Tsagarides
2020-01-09 22:14:37

Bruno Reyes
2020-01-10 00:02:53

原文網址 Adam Notamas
2019-10-31 01:32:31

My new never been printed on photon s does not seem to see usb sticks. :( ? is this something i just have to get replaced? because i tried power circling and all that stuff.

翻譯年糕

Marc de Hoogh
2019-10-31 01:39:12

Marc de Hoogh
2019-10-31 01:39:39

Adam Notamas
2019-10-31 01:39:51

Adam Notamas
2019-10-31 01:40:48

Jeff Greenfield
2019-10-31 01:52:54

Marc de Hoogh
2019-10-31 02:23:33

Adam Notamas
2019-10-31 02:42:33

Marc de Hoogh
2019-10-31 02:44:36

Adam Notamas
2019-10-31 02:45:13

Rich James Berryman
2019-10-31 23:11:43

Adam Notamas
2019-11-01 00:23:28

Adam Notamas
2019-11-01 00:25:48

Jeff Greenfield
2019-11-01 02:49:51

Adam Notamas
2019-11-01 05:31:29

Jeff Greenfield
2019-11-01 06:00:49

Adam Notamas
2019-11-01 09:35:25

原文網址 Juan Sebastian Vallejo Restrepo
2019-10-30 02:21:04

Hola a todos acabé de instalar mi photon s no tengo ni la menor idea de cómo se maneja el programa que viene en la usb tampoco se como darle grosor ingerno a un modelo dental Atlas no como separarlo de la plataforma para ponerle los palitos que sostienen el modelo gracia si me ayudan un poco

翻譯年糕

Handrez Pintubola
2019-10-30 04:44:14

原文網址 Jim Nelson
2019-10-30 00:17:11

After much adventure, my USB port failure seems to be solved. It appears the screws holding the port in place were loose (received that way from the factory, so check your screws), allowing the port to shift slightly whenever a drive was placed in it, causing a faulty connection. So, if you encounter a USB issue like mine, check there first.

翻譯年糕

原文網址 Nathan Jantz
2019-10-29 19:52:28

Whats the best usb drive to replace the one that comes with the photon? Whats the best usb drive to replace the one that comes with the photon? 翻譯年糕

Kyle Calderwood
2019-10-29 19:55:20

Tiernan Messmer
2019-10-29 19:55:45

Kayo Michiels
2019-10-29 19:59:10

Reb O'Rourke
2019-10-29 20:00:08

Jim Stephens
2019-10-29 20:26:18

Andriy Lutsenko
2019-10-29 20:28:18

Chad Elstad
2019-10-29 22:52:09

Guy Romhild
2019-10-30 01:28:44

John Klingbeil
2019-10-30 01:46:30

原文網址 Mark Bryner
2019-10-29 14:52:01

Hi all.
I'm still having a really weird issue where my prints are being compressed to the build plate. Even with supports and a raft, the raft gets completely flattened.
Elegoo grey resin Bottom layers: 8 Bottom exposure: 100s Normal exposure: 18s Height: 0.05
So far, I've:
Leveled the build plate using both the paper method and Flint Read method Changed USB sticks Increased and decreased bottom exposure times by 10 seconds Made sure the FEB is clean and tight Printed at optimal room temperature
This issue just started to happen. Unfortunately, I can't figure out why. Some of you helped with providing advice, but I'm at a loss. Printing agaisnt the build plate without supports seems to be a no no for some, but I've been doing it for a while with no issues. When trying to switch to supports with rafts, the same issue persists.
Thanks for reading. 翻譯年糕

Péter Farsang
2019-10-29 15:14:42

Charles Rieken
2019-10-29 15:40:53

Jonathan Bollon
2019-10-29 19:49:44

Mark Bryner
2019-10-29 23:21:24

Mark Bryner
2019-10-29 23:21:40

Rikard Weijmer
2019-10-29 23:24:13

Mark Bryner
2019-10-29 23:36:26

Rikard Weijmer
2019-10-29 23:37:04

Mark Bryner
2019-10-29 23:52:02

Rikard Weijmer
2019-10-29 23:53:18

Charles Rieken
2019-10-30 00:00:26

Mark Bryner
2019-10-30 00:24:52

Mark Bryner
2019-10-30 00:25:41

Jonathan Bollon
2019-10-30 02:04:35

Mark Bryner
2019-10-30 03:43:16

Jonathan Bollon
2019-10-30 04:01:13

Mark Bryner
2019-10-30 05:30:10

Jonathan Bollon
2019-10-30 05:50:13

Mark Bryner
2019-10-30 05:53:08

Jonathan Bollon
2019-10-30 05:53:58

Péter Farsang
2019-10-30 15:30:09

Péter Farsang
2019-10-30 15:31:37

Mark Bryner
2019-10-30 16:36:10

Mark Bryner
2019-10-30 16:39:45

Mark Bryner
2019-10-30 16:39:56

Mark Bryner
2019-10-30 16:40:04

Mark Bryner
2019-10-30 16:40:39

Péter Farsang
2019-10-30 16:42:01

Jonathan Bollon
2019-10-30 19:22:41

Mark Bryner
2019-10-31 15:30:16

Ankh Thara
2019-10-31 15:36:46

Péter Farsang
2019-10-31 16:12:12

Mark Bryner
2019-11-01 00:40:18

Péter Farsang
2019-11-01 02:59:58

Mark Bryner
2019-11-01 15:54:34

Péter Farsang
2019-11-01 16:09:53

原文網址 Benny Woolley
2019-10-29 07:56:53

Edit: Screen strobing, culprit found. :(

What could cause this thick sheet of mess to form?
This is the first time in about two years I've had such a grim failure, but it's done it twice with two newly sliced files.
File was validated and I checked it over just now, nothing like this on the file anywhere.

Corrupted file? Bad USB?

翻譯年糕

Jeremy Swigart
2019-10-29 07:59:25

Edwin Richter
2019-10-29 08:00:05

Greg Kourakos
2019-10-29 08:00:06

Benny Woolley
2019-10-29 08:00:19

Benny Woolley
2019-10-29 08:01:15

Jeremy Swigart
2019-10-29 08:01:17

Benny Woolley
2019-10-29 08:02:06

Scott Colvin
2019-10-29 08:02:17

Benny Woolley
2019-10-29 08:03:22

Scott Colvin
2019-10-29 08:05:40

Benny Woolley
2019-10-29 08:06:14

Benny Woolley
2019-10-29 08:07:02

Scott Colvin
2019-10-29 08:09:04

Rowan Watson
2019-10-29 08:09:37

Benny Woolley
2019-10-29 08:13:44

Rowan Watson
2019-10-29 08:15:47

Benny Woolley
2019-10-29 08:17:48

Rowan Watson
2019-10-29 08:18:40

Benny Woolley
2019-10-29 08:20:43

Benny Woolley
2019-10-29 08:40:18

Michael Drew
2019-10-29 08:52:45

Rowan Watson
2019-10-29 09:16:27

Benny Woolley
2019-10-29 09:17:29

Benny Woolley
2019-10-29 09:18:11

Mike Fair
2019-10-29 09:18:44

Benny Woolley
2019-10-29 09:19:27

Rowan Watson
2019-10-29 09:20:18

Benny Woolley
2019-10-29 09:22:20

Benny Woolley
2019-10-29 09:57:24

Mike Fair
2019-10-29 09:58:16

Benny Woolley
2019-10-29 10:19:28

原文網址 Jim Nelson
2019-10-29 00:02:53

Out of the blue, after several weeks of operating fine, my Photon S is failing to open files from the USB, both from the one supplied with the printer (which I know isn't very good and have been expecting it to fail) and from a second USB drive. Is there anything that can be done, short of turning to Customer Support?

翻譯年糕

Derek Reihe
2019-10-29 00:04:01