Anycubic Photon Printer Owners 造訪社團 » Instagram

I’ve been busy ? . All of it off the photon. I gave some fdm beauties also. I love this thing
You can find my other work on my page. Artist market and showcase . Or my instagram paintingninja.

翻譯年糕

In case someone finds it useful, I converted Anycubic photon packaging into a curing chamber. https://www.instagram.com/p/BtrHhKwCHZM/…

翻譯年糕

Question:
Pleased with the results how the print looks, however, I use it for dental lab, and I did a model test printing a model that I already had in plaster, and I tryed on a tooth I made (not printed, I made it out of Zirconium) and it fitted tight, did not fit right for about .1 or .2 mm (it is really important the precision in dental) that same tooth fits perfect on the plaster model.
I do not know what I am doing wrong, probably the cleaning and curing procces, because I'b seen same printer in the instagram of other labs and works just perfect, I even use their specs to print (with good results for them).
Please Help.

翻譯年糕

having great luck with the Anycubic Orange.

.025 layer
15sec normal
1 off time
100 bottom exposure
7 bottom layers

The key for me after every print, reset the platform z height. I can get away with .05 layers mutliple prints, but anything below I need to reset the Z-hieght, which only takes a minute. The resin has been in the vat for a few weeks - I just stir it, add a bit more and go. I also put on a mask and put my ear really close the first few layers to ensure I'm hearing the snap of the print pulled off the vat. If it doesn't, I scratch the print.... which doesn't happen often.

This print was my longest yet (roughly 15 hours) using the above settings. Note: I only angled the print about 25 degrees... it was putting too many supports at 45. I also added four drain holes in meshmixer when hollowing:
https://www.instagram.com/p/BuMIWT6Hr_f/…

翻譯年糕

.025 layers, anycubic orange, airbrush primer grey and black, custom sculpt art piece. Just thought I would share. Roughly 14 hr print.

https://www.instagram.com/p/BtySHDoHTvu/…

翻譯年糕

Wonderful community of 3D Anycubic Photon DLP Printer Owners, I'm happy to share with you guys one of my favorite 3d models made by me for FREE :)
To download the the model follow the link here:
https://gum.co/KRrTD
A week ago I create a patreon page so I can share and create more 3d printable miniatures with your support here:
https://www.patreon.com/Maverickplus

And stay tune for future updates and 3d models at:
https://www.facebook.com/Maverickplus
https://www.instagram.com/maverickplus
https://www.youtube.com/channel/UCXyZKePxwfON3Op4ek5ItLA

翻譯年糕

https://www.instagram.com/p/BsEZClxFpug/…
Looks like my warping has to do with the weight of the model. The lighter resin warps less. Mainly I just need to be really careful with the supports. Also, the anycucubit red really looks like candy.

翻譯年糕

People I want to share my best work with the photon! And some other works at my IG: @I3Das

https://www.instagram.com/p/Bp73xsdB5I3/…

翻譯年糕

https://www.instagram.com/p/BsBhjRYldxA/…
The Photocentric Firm UV grey has been simultaniously more and less forgiving to print than the Ancycubit green that comes with the machine. It does not like primer, which is suboptimal for mini printing. I know this gets asked a lot but, what do you guys use and why?

翻譯年糕

Created another Chain on a Christmas Decoration. This time one link longer than the Snowflake.

Two of the smaller links fused slightly, but Dr Scalpel fixed that, I need to add more clearance between these two links.

I'm pretty sure I could get away with fewer supports on the tree itself.

https://www.thingiverse.com/thing:3253792/edit

https://www.instagram.com/adamwiddow/

翻譯年糕