Anycubic Photon Printer Owners 造訪社團 » 切片

原文網址 Kempster Kevin
2020-03-26 02:21:24

Prusa Slicers hollow function is so nice. Super accurate and smooth and you can edit it when you save the project file. Edit: you have to save the hollow as an stl, if you try to do a hollow then outo supports the inside gets filled with supports. If you save the hollow then do auto supports it works normally. Not great, but gettin there.

普魯薩切片空洞功能真好. 超級準確和光滑, 儲存專案檔案即可編輯. 編輯: 你必須將空洞儲存為stl, 如果你嘗試做空洞, 那麼outo支援內部就會充滿支援. 如果你儲存了空洞, 那麼自動支援它正常運作. 不是很好, 但得到那裡.

· 查看原文 · 為此翻譯評分

原文網址 Ernest Sandridge Ill
2020-03-25 01:59:05

So I am at a loss as to why the tunic is greyed out.
I got it from thingiverse. Seems no matter which slicer I use it's still that way. Can't put supports on it or anything. Can someone explain this to me.
Thanks.

所以, 我很困惑, 為甚麼這件內衣被灰色.
我從thingiverse那裡得到的. 似乎不管我用哪一個切片, 它仍然是這樣. 不能支援它或任何東西. 誰能給我解釋一下嗎?
謝謝.

· 查看原文 · 為此翻譯評分

Ludovico De Giulio
2020-03-25 02:00:28

Interested in it

Liam Newman
2020-03-25 02:01:31

Maybe the mesh isnt closed? If your running windows 10 try putting it through 3d builder and see what it says

David Seaman
2020-03-25 02:01:46

It could also be an inverted mesh.

Richard Humble
2020-03-25 02:02:04

The normals are reversed, needs fixing. The darker areas are 'inside'

Hector Alvarez
2020-03-25 02:03:16

Load it into Microsoft 3d builder and itll automatically fix it

Nicholas Hein
2020-03-25 02:03:41

Like mentioned already its a non fixed not manifold reversed mesh. You will need to fix the normals before printing it.

Ernest Sandridge Ill
2020-03-25 02:09:01

Ahhh, yes thank you all.
It worked.

Nicholas Hein
2020-03-25 02:18:08

To elborate. There are a lot of ways to fix it. I use netfab and auto fix. Simple and free. Apparently 3d builder works well enough. I havent tried. You can upload the stl into programs like blender and fix it there.

Scott Pavlich
2020-03-25 04:24:58

Your normals aren’t normal!

David McGyver
2020-03-25 05:21:17

Abnormal normals?

Igor Melnyk
2020-03-25 17:30:27

Hello. Please me model printer and parametrs ?

Seth Manrow
2020-03-26 08:35:33

Open it up in Prusaslicer, right click, and choose "Fix via Netfabb" - might fix your inside-out polygons! I use it for every STL as a safety measure.
Edit: Disregard, I see you fixed it!

原文網址 Justin Alan Lauman
2020-03-24 10:56:21

hello all . so I finally joined the resin printer community . got a photon with the photon resin. any pointers or tips. especially for slicing my own stuff as I have not used the software before. I know I dont want stuff to be solid all the time so I will need to make holes and what not. thanks all

大家好. 所以我終於加入樹脂印表機社羣. 得到了一個光子樹脂的光子. 任何指向或提示. 特別是因為我以前沒有使用過軟體, 所以我自己切片. 我知道我不希望東西總是堅固, 所以我需要做洞, 甚麼不. 謝謝大家

· 查看原文 · 為此翻譯評分

Bob Deblier
2020-03-24 12:53:32

Read posts in this group; go back weeks and months if you have to. All the questions you are going to have will be there. But first read the Photonsters FAQ.

Justin Alan Lauman
2020-03-24 13:02:03

Thank you ?

原文網址 Emil Gudmundsson
2020-03-22 17:52:29

This whole batch looked like this, almost looks like they've been sliced, you can sort of flake it off.

Any ideas?

這整批次看起來像這樣, 幾乎看起來像被切片, 你可以把它弄掉了.

有甚麼想法嗎?

· 查看原文 · 為此翻譯評分

Mike Hardie
2020-03-22 17:54:37

Makes me think of the tears you can get from overexposure, but that usually takes a lot to get

Justin Cupitt
2020-03-22 17:57:23

Which resin, I had this happen with a batch and I never could work out why

Aaron Shrive
2020-03-22 17:58:20

Also what model is this?

Vorawich Watthanarojanaporn
2020-03-22 17:59:39

I also have this kind of problem

Vorawich Watthanarojanaporn
2020-03-22 18:00:37

Fred Bey
2020-03-22 18:02:39

It it's just random extra tiny layers, that is frame shearing. You will have to update your firmware to get rid of that.

If layers not quite sticking to each other (delamination), that's a sign of under exposure.

Sarah Kraus
2020-03-22 18:10:13

What are your settings ? Especially the Layer settings

Ashley Cobb
2020-03-22 18:48:35

I had this happen when I left a part that was washed but not post cured in an area with ambient daylight for several days.

Emil Gudmundsson
2020-03-22 19:03:32

The wierd thing is the next batch was fine. Maybe I forgot them lying in indirect sun light too long or something

Emil Gudmundsson
2020-03-22 19:06:43

Aaron Shrive from Reptilian Overlords patreon

Aaron Shrive
2020-03-22 19:12:12

Emil Gudmundsson will be going to check them out!

Alex Bainbridge
2020-03-22 21:09:46

Actually think it looks cool on the armour bits ??‍♂️

Rob Mayberry
2020-03-22 22:26:55

Screen flicker it could be failing

Alwin Chan
2020-03-22 23:58:00

Stir your resin.

Stefan Giudici
2020-03-24 03:30:07

Which firmware?

原文網址 John Chrapkowski
2020-03-22 14:46:48

I have an original photon, and I have heard I can use the epax firmware to enable the Ethernet port. Does it allow me to control the printer- meaning start prints and send the sliced files?

我有一個原始光子, 聽說我可以使用epax固件來啟用乙太網埠. 它允許我控制印表機的意思開始列印並傳送切片的檔案嗎?

· 查看原文 · 為此翻譯評分

Bob Deblier
2020-03-22 14:54:28

Send slices files: yes; Control printer: https://github.com/Photonsters/PhotonNetworkController

John Chrapkowski
2020-03-22 14:56:13

Bob Deblier awesome. I didn’t want to go for it unless it has this at least

Bob Deblier
2020-03-22 14:59:00

That page states the project is deprated, so for correctness: https://github.com/....../Universal-Photon-Network....../

John Chrapkowski
2020-03-22 15:00:46

Bob Deblier oh wow. Great! Thank you so much

原文網址 Jennifer Tallman
2020-03-22 09:58:05

I was asked to print this head, which fit in the slicer (barely), but the chin got cut off while printing. There are also some odd lines around the temple and jaw. Because of the size, I could only print it vertical, otherwise it wouldn't fit at all. Does anyone know why I have those two issues? I placed a ton of heavy supports because of the weight but it stuck to the build plate nicely....I was really hopeful it would print properly. Any help is much appreciated.

我被要求列印這個頭, 它適合切片(勉強), 但下巴在列印時被砍掉了. 寺廟和下巴周圍也有一些奇怪的線條. 因為尺寸, 我只能垂直列印, 否則根本不適合. 有人知道為甚麼我有這兩個問題嗎? 因為體重, 我放了一噸重支撐, 但它粘在構建板上.... 我真的很希望它能正確列印. 非常感謝任何幫助.

· 查看原文 · 為此翻譯評分

Kyle Telechan
2020-03-22 10:00:13

Did you pause it at all? I've noticed when I pause my prints, they sometimes develop lines like that.

Obviously not the issue if they're not parallel with the layers, though.

Ian Henry
2020-03-22 10:02:54

Kyle Telechan this!

the lines could also be where more resin was added

Louis Siciliano
2020-03-22 10:04:22

I always get lines when i pause. And even if you have heavy supports if not enough or in the right place you can get flex at points that make lines

Michael Del Valle
2020-03-22 10:12:54

I got this too but fixed it by adjusting the orientation

Jennifer Tallman
2020-03-22 10:13:34

I only pause it when it's at the support level, before it starts printing the main part, just to make sure everything is sticking to the build plate. I didn't add resin.

Jennifer Tallman
2020-03-22 10:14:37

I would love to tilt this back but it won't fit. I love this printer but wish I went with a bigger build plate. I'm keeping my eye open for good deals.

Michael Del Valle
2020-03-22 10:16:42

Jennifer Tallman watch a few of this guy's videos. He changed the way I do things haha.
https://youtu.be/8xolVj0izVo

Jennifer Tallman
2020-03-22 10:18:33

Oh I love his videos. I've watched just about every one. If I had a larger build plate, I would orientate it differently for sure.. but it barely fits and only upright. I may just have found the limitations of the Photon, but if there is a way to make this work, then I'd like to figure it out.

Michael Del Valle
2020-03-22 10:20:11

Can you put up a screenshot of the orientation?

Drew Delano
2020-03-22 10:23:08

"adjusting the orientation" ? ? ? ? I got it

Jason Pedersen
2020-03-22 10:23:47

Louis Siciliano that's exactly what my thought was. Either a pause or a resin top off.

Jennifer Tallman
2020-03-22 10:28:20

If I tilt or move this in any direction, it'll be out of the bounding box

Luiz Junior
2020-03-22 11:20:46

Louis Siciliano that’s because resin in vat is warmer. The resin on the bottle is colder and when you mix them, the expand of cured resin isn’t the same as previous layer.

Louis Siciliano
2020-03-22 11:22:41

Thanks Luiz Junior . Good to know. I dont add to my prints. Havent had too. But i keep my bottle inside the heated enclosure next to my printer anyway.

Joel Mendoza
2020-03-22 11:58:17

Almost thought this was another mask for c19. ?

Jon Geiger
2020-03-22 12:41:27

reduce the scale about 10% if it doesnt have to be exactly that size

Bob Deblier
2020-03-22 14:05:43

Insufficient internal supports cause deformation.

Richard Humble
2020-03-22 14:37:11

I suspect the lower line around the chin is suction. You need a vent hole at the lowest point of any pocket.

Richard Günter Dölz
2020-03-22 16:49:33

Are you be able to share the project with its supports, I won't be able to help, but there will be those with more experience who can look at your supports and make suggestions

Jennifer Tallman
2020-03-22 19:49:05

Richard Günter Dölz I didn't save the supported file unfortunately. I had lots of internal heavy supports to ensure the printing of the heavy top.... but maybe it's too much material over a flat bottom surface. I can't change anything, since this is someone else's design.

Jennifer Tallman
2020-03-23 10:48:06

I decided to use the Anycubic slicer instead of Chitubox and I found a way it'll fit and print with improved quality. It's a tight fit but it worked.

原文網址 Lee Rogers
2020-03-20 17:31:11

This maybe a stupid question...can you get dodgy bottles of resin?
I have a bottle of grey and black anycubic and a bottle of elegoo clear blue. All recommendations the same 60/8 seconds. This is what I have set out to in the slicer. was using the Anycubic grey and getting great results (pic 1). I then switched to the black Anycubic (same settings) to print a simple base for a model. I've tried upright, 45 degrees, flat, all raised on supports etc but 5 failed prints. Either supports breaking, not sticking to build plate, but mostly resin forming on the FEP which I've had to empty and peel off (pic 2 and 3).
I thought it was the screen so swapped to translucent blue, exactly the same settings, could see the screen working through the resin , and it printed a random print perfectly first go (last pics) ?‍♂️ what's going on with this black resin?

這可能是個愚蠢的問題... 你能得到一瓶樹脂嗎?
我有一瓶灰色和黑色的任何立方體和一瓶elegoo清白藍色. 所有推薦的60/8秒. 這就是我在切片中闡述的. 使用任何立方體灰色, 獲得了很好的結果(圖片1), 然後切換到黑色anycubic (相同的設定)列印一個簡單的模型基礎. 我嘗試了直立, 45度, 平坦, 全都在支撐上, 但5個失敗的指紋. 要麼支援破碎, 而不是堅持構建板塊, 但主要是在我不得不清空和剝離的fep上形成樹脂(圖片2和3).
我以為是螢幕換成半透明藍色, 完全相同的設定, 可以看到螢幕通過樹脂工作, 然後隨機列印了一個完美的列印(最後一張照片) ♂️ 這黑色怎麼了樹脂?

· 查看原文 · 為此翻譯評分

Darko Miljak
2020-03-20 17:35:30

Revin Leong
2020-03-20 17:43:16

罗西晟
2020-03-20 17:44:11

James Steven Cheeseright
2020-03-20 17:50:18

Lee Rogers
2020-03-20 18:23:28

Lee Rogers
2020-03-20 18:24:05

Lee Rogers
2020-03-20 18:26:10

Lee Rogers
2020-03-20 18:27:06

James Steven Cheeseright
2020-03-20 18:30:07

James Turner
2020-03-20 19:08:07

Lee Rogers
2020-03-20 19:15:31

罗西晟
2020-03-20 19:22:07

James Turner
2020-03-20 19:23:40

罗西晟
2020-03-20 19:27:03

罗西晟
2020-03-20 19:28:46

Richárd Papp
2020-03-20 19:37:25

Richárd Papp
2020-03-20 19:39:30

Richárd Papp
2020-03-20 19:52:10

Fran Ce
2020-03-20 20:24:28

Lee Rogers
2020-03-20 20:28:52

Richárd Papp
2020-03-20 20:36:41

Richárd Papp
2020-03-20 20:37:05

Lee Rogers
2020-03-20 20:38:14

Lee Rogers
2020-03-21 01:00:01

Richárd Papp
2020-03-21 01:01:25

Lee Rogers
2020-03-21 01:08:13

Lee Rogers
2020-03-21 01:08:18

Richárd Papp
2020-03-21 01:28:17

Lee Rogers
2020-03-21 01:32:32

Richárd Papp
2020-03-21 01:33:08

Richárd Papp
2020-03-21 01:33:32

Lee Rogers
2020-03-21 01:36:10

原文網址 Arthur White
2020-03-14 14:10:35

Used Meshmixer to make sure it’s a printable solid. ✅
Used Chitubox to hollow and support ✅
Used Photon Validator to prevent islands ✅
But when I sliced with photon workshop I see these triangles that shouldn’t be there. Always have perfect prints, never had this happen to me before.
Thoughts?
maybe corrupt file?

使用meshmixer確保它是一個可列印的固體. 你知道嗎?
使用chitubox空洞並支援 ✅
使用光子驗證器防止島嶼 ✅
但是當我用光子車間切片時, 我看到這些不應該出現的三角形. 總是有完美的指紋, 以前從未發生過這種情況.
想法?
也許是腐敗的檔案?

· 查看原文 · 為此翻譯評分

Nicolas Tsagarides
2020-03-14 16:59:39

Maciej Barwicki
2020-03-14 16:59:51

原文網址 Tucker Adams
2020-03-13 22:19:16

Well I now understand the importance of hollowing larger models. Tried printing a file from patron that was larger than most, and it went great, until the resin ran out lol. I’ve looked up some videos on it and I already have meshmixer, but I’m curious about generating infill or peaks inside the model that may need supports. Does the photon slicer or does chitubox have the ability to add supports internally if necessary?

好吧, 我現在明白空洞更大的模特的重要性. 嘗試從贊助人那裡列印一個比大多數人更大的檔案, 結果很順利, 直到樹脂耗盡lol. 我已經檢視了一些視訊, 我已經有meshmixer, 但我很好奇在模型內產生填充或高峰, 可能需要支援. 光子切片或chitubox是否有能力在必要時新增支援?

· 查看原文 · 為此翻譯評分

Keith O'Donnell
2020-03-13 22:22:36

Jim Nelson
2020-03-13 22:23:28

Scott Pavlich
2020-03-13 22:23:42

Tucker Adams
2020-03-13 22:29:40

Scott Pavlich
2020-03-13 22:49:10

Chris Roberts
2020-03-13 23:31:32

Jarin Udom
2020-03-14 01:44:29

Tucker Adams
2020-03-14 02:05:34

原文網址 Robin Haugaas
2020-03-13 16:26:50

I aquired the Photon to use it in my architecture studies, and so far it has worked like a charm!
Heres a joint made to connect the wooden space truss roof. Modelled in Rhino and sliced in chitubox.

我把光子放在我的建築研究中使用它, 到目前為止它像個魅力一樣有效!
這是一個連線木制太空truss屋頂的聯合. 模仿犀牛, 在chitubox中切片.

· 查看原文 · 為此翻譯評分