• COSPLAY 3D 建模
  • 3D列印服務
  • #maker+t=market
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » smoother

原文網址 David Gottschalk
2018-11-05 12:21:23

I want to thank everyone that bared with me today. You all make my first day with my Photon a lot smoother. Still trying to get a good test print out. Im on the 3rd attempt. I thought the first one failed because i paused it at 8% to make sure it stuck. It did, but then the rest of the print was sticking to the vat. So i cleaned it all up and started again. Same issue. Stuck to both. Check my leveling and it was a tad to tight. I redid my home position and now the paper is loose with just light friction.

So here is hoping try #3 goes through smoothly.

Two last questions: How often do you all recommend replacing the sheet on the Vat?
Anycubic stated that you shouldn't leave the resin in the vat without printing for more that 48 hours. If i am printing continually, how often should i swap the resin? Or will it run out long before two day from continuous printing?

翻譯年糕

Robert Maefs
2018-11-05 12:51:27

Dave Lemsing
2018-11-05 13:19:10

Dave Lemsing
2018-11-05 13:22:58

Dave Lemsing
2018-11-05 13:27:06

Sen Kun
2018-11-05 17:33:53

Sen Kun
2018-11-05 17:43:42

Dominik Honke
2018-11-05 19:56:06

Chad Elstad
2018-11-05 21:19:12

David Gottschalk
2018-11-05 21:40:25


原文網址 Paul Wills
2018-10-23 00:03:23

Two weeks on and I am loving this printer (apart from the resin costs) for the last 5 days it has been printing solid making components for a new FDM printer I am modding. I have printed hinges, door handles, smoother pcb boxes etc. Without tempting fate it has worked faultlessly and I haven't experienced any sticking issues since taking the advice from this page and its helpful members. Am still getting brown tinted clear resin after curing but it looks quite nice :-)

翻譯年糕


原文網址 Kelly Sealey
2018-10-04 16:28:47

Second attempt with oiled z-rod (used WD40 but have some lithium grease now) at 0.02 using settings from the Google docs sheet. The layer lines are almost gone, I have one more suggestion to try, printing at a steeper angle for a more even peel which I'll do next. That said though, I'm really happy with the subtlety of the layer lines now, but those pixel marks are a problem. I know I can't totally avoid them but I'm sure I've seen smoother prints. Any tips on smoothing out the pixel marks more?

I'm using Anycubic green on a yellow window machine bought in August using the settings suggested in Google docs. Those settings seem to work well on this printer, the details are so crisp that the pixel marks are obvious :/ I'm wondering if raising the exposure time would soften the pixel marks, perhaps at the cost of some detail?

翻譯年糕

Greg Armstrong
2018-10-04 16:35:28

Simon Powell
2018-10-04 16:38:50

Cholubin Bido
2018-10-04 17:40:44

Philippe Maegerman
2018-10-04 18:10:49

Trea Cotton
2018-10-04 18:13:09

Jesse Stenner
2018-10-04 20:45:00

Kelly Sealey
2018-10-04 21:00:55

Dennys Wang
2018-10-04 21:11:25

Jesse Stenner
2018-10-04 21:30:06

Om Buncit
2018-10-04 21:37:54

Philippe Maegerman
2018-10-04 21:42:35

Marco Zannini
2018-10-04 22:02:56

Jesse Stenner
2018-10-05 01:09:14


原文網址 Matt Plonski
2018-06-14 04:45:12

Hey, everyone. I took this picture and thought you might find it interesting. On the left is my version of a "Riddler Trophy" from the Batman Arkham City video game printed in the Anycubic sample resin. On the right is the same model from Shapeways in Frosted Extreme Detail (now called "Smoothest"). I wasn't expecting the Anycubic one to be so much smoother. You can hardly see the layers. I'm so glad I bought this thing!

翻譯年糕


原文網址 Sean Latto
2018-04-17 14:36:55

Looking to Sell my Photon (approx 2 months old, very little use), Decided its not really for me. It is the version with long Z lead screw, 1ltr of monocure clear, 1ltr monocure white, 1/2 ltr monocure grey (all Rapid). Spare Fans (Filter and Bottom), 2 spare LCD's, 2x spare LCD Screen Protectors, 1 x Spare Lead Screw, 1x TL Smoother, about 8 FEP Sheets. Plus tools , mask, gloves.

UK Based.

All in i am looking for £500 + postage costs.

翻譯年糕


原文網址 Flint Read
2018-03-17 19:01:18

Just finished a long and tall print to see if the slight wavy lines I had been getting in prints, had been solved by adding a diode based current smoother between the board of the photon and the motor and I am glad to say at 0.03 they seem to have gone 0.03 was a height that made them particularly visible for me and now im not seeing the phenomena (it looked like a very slight undulation peaking every 20 layers or so and was definitely not Z wobble)

Here is a link to the exact module i fitted
Don't be fooled by the description it's not a controller it's just a current filter.
Also if you fit it make sure to insulate it with electrical tape so the solder pads can't short out inside the case of the Photon.

翻譯年糕

Phil Dalbeck
2018-03-17 19:43:44

Grant Parkes
2018-03-17 19:43:46

Flint Read
2018-03-17 19:45:03

Flint Read
2018-03-17 19:56:17

Phil Dalbeck
2018-03-17 19:56:29

Flint Read
2018-03-17 19:57:35

Nel Elson
2018-03-17 20:23:07

Flint Read
2018-03-17 21:00:17

Flint Read
2018-03-17 21:05:38

Flint Read
2018-03-17 21:06:08

Flint Read
2018-03-17 21:10:23

Flint Read
2018-03-17 21:18:24

Flint Read
2018-03-17 21:18:33

Phil Dalbeck
2018-03-17 21:24:18

Flint Read
2018-03-17 21:26:02

Phil Dalbeck
2018-03-17 21:26:36

Phil Dalbeck
2018-03-17 21:28:01

Phil Dalbeck
2018-03-17 21:28:24

Flint Read
2018-03-17 21:29:26

Flint Read
2018-03-17 21:29:54

Flint Read
2018-03-17 21:30:27

Flint Read
2018-03-17 21:31:39

Flint Read
2018-03-17 21:31:52

Adam Albee
2018-03-17 22:23:51

Nel Elson
2018-03-17 22:33:41

Phil Dalbeck
2018-03-17 22:49:08

Phil Dalbeck
2018-03-17 22:49:52

Phil Dalbeck
2018-03-17 22:49:59

Adam Albee
2018-03-17 23:01:07

Vaughan Lundin
2018-03-17 23:01:10

Flint Read
2018-03-17 23:02:57

Phil Dalbeck
2018-03-17 23:06:05

Phil Dalbeck
2018-03-17 23:06:52

Flint Read
2018-03-17 23:07:48

Phil Dalbeck
2018-03-17 23:09:20

Flint Read
2018-03-17 23:10:12

Adam Albee
2018-03-17 23:11:45

Phil Dalbeck
2018-03-17 23:13:16

Jeremy Lauzon
2018-03-17 23:50:32

Phil Dalbeck
2018-03-17 23:57:02

Flint Read
2018-03-18 00:06:22

Flint Read
2018-03-18 00:06:54

Flint Read
2018-03-18 00:17:08

Phil Dalbeck
2018-03-18 00:18:26

Flint Read
2018-03-18 00:19:31

Jeremy Lauzon
2018-03-18 00:25:53

Jeremy Lauzon
2018-03-18 00:26:11

Phil Dalbeck
2018-03-18 00:27:26

Flint Read
2018-03-18 00:28:16

Jeremy Lauzon
2018-03-18 00:30:21

Flint Read
2018-03-18 00:31:16

Flint Read
2018-03-18 00:31:37

Jeremy Lauzon
2018-03-18 00:32:17

Flint Read
2018-03-18 00:33:10

Mariano Loisi
2018-03-18 04:04:06

James Rotondo
2018-03-18 04:49:01

Sa Rnd
2018-03-19 06:07:51

Mariano Loisi
2018-03-19 06:52:22

Toby Kirkby
2018-03-19 07:09:32

Sean Latto
2018-03-22 00:58:38

Sean Latto
2018-03-22 01:01:00

Flint Read
2018-03-22 01:04:37

Sean Latto
2018-03-22 01:05:25

Yosei Ikeda
2018-04-04 01:53:40

Flint Read
2018-04-04 05:59:00

Kaanaan Kuna
2018-04-04 07:22:09

Flint Read
2018-04-04 07:22:48

Kaanaan Kuna
2018-04-04 07:25:13

Flint Read
2018-04-04 07:25:17

Kaanaan Kuna
2018-04-04 07:29:50

Yosei Ikeda
2018-04-04 07:30:06

Yosei Ikeda
2018-04-04 07:32:13

Flint Read
2018-04-04 07:33:42

Kaanaan Kuna
2018-04-04 07:36:07

Flint Read
2018-04-04 07:36:33

James Rotondo
2018-04-04 10:14:13

Sean Latto
2018-04-07 23:47:46

Flint Read
2018-04-07 23:48:41

Sean Latto
2018-04-07 23:49:20

Flint Read
2018-04-07 23:50:40

Nel Elson
2018-04-07 23:56:06

Yosei Ikeda
2018-04-08 00:31:21

Markito Trogolito
2018-05-07 19:00:50

Lou Steinritz
2018-05-11 22:35:38

Lou Steinritz
2018-05-11 22:38:25

Lou Steinritz
2018-05-11 22:51:35

Yosei Ikeda
2018-05-11 23:38:32

Lou Steinritz
2018-05-12 00:08:16

Grant Parkes
2018-05-12 03:42:00

Lou Steinritz
2018-05-12 04:41:37

Markito Trogolito
2018-05-12 04:44:51

Nel Elson
2018-05-12 06:43:50

Lou Steinritz
2018-05-13 22:13:56

Vinicius Silva
2018-07-23 05:51:21

Vinicius Silva
2018-07-23 06:03:14

Anh Hoàng
2019-06-20 06:25:01

Martinus Hwit
2019-07-29 01:29:37


原文網址 Flint Read
2018-03-13 21:11:32

while i had my machine apart yesterday I installed a stepper motor smoother.

The theory is that it may help provide more accurate stepping and less lost steps so might help me reduce or eliminate the very slight wave pattern i see in some prints, I will let you guys know if it makes any difference at all when i get my screen installed tomorrow.

It might make zero difference but running the lead screw up and down I can tell it has already made the motor a lot quieter.

翻譯年糕

Sebastian Fernandez
2018-03-13 21:35:12

Flint Read
2018-03-13 21:35:40

Flint Read
2018-03-13 21:36:22

Flint Read
2018-03-13 21:37:17

Philippe Maegerman
2018-03-13 21:49:51

Flint Read
2018-03-13 21:50:40

Milko Todorov
2018-03-13 21:51:37

Flint Read
2018-03-13 21:52:33

Christian Nørgaard Fallesen
2018-03-13 22:10:09

Flint Read
2018-03-13 22:11:10

Vaughan Lundin
2018-03-13 23:44:37

Kevin Rank
2018-03-13 23:45:49

Flint Read
2018-03-13 23:46:26

Flint Read
2018-03-13 23:47:05

Flint Read
2018-03-13 23:50:51

Flint Read
2018-03-13 23:51:18

Vaughan Lundin
2018-03-13 23:53:31

Chance Reeves
2018-03-14 06:53:47

Flint Read
2018-03-14 06:54:50

Chance Reeves
2018-03-14 06:56:41

Flint Read
2018-03-14 06:58:50

Toby Kirkby
2018-03-14 08:21:27

Grant Parkes
2018-03-16 15:36:34

Flint Read
2018-03-16 20:08:28

Flint Read
2018-03-16 20:48:48

Flint Read
2018-03-17 00:45:48

Flint Read
2018-03-17 02:36:15

Philippe Maegerman
2018-03-17 02:39:34