Anycubic Photon Printer Owners 造訪社團 » TIP

Hi Guys and girls, i have th issue from the image. Made a test print with one unit that worked well now I've multiplyed it and got that result.... Mid front is ok the rest crap.... Can anybody tell me why this happens and who to avoid? (It a normal photon) with higher exposure time the print got to messy ..
Thank you for any help.
Q

翻譯年糕

Need some advice.

My prints even after cleaning are incredibly sticky. There's almost no chance that it's residual resin because after a wash in cleaner, I'm curing these things overnight and then hit it even more with my UV flashlight for a good minute or two up close just to be thorough.

I'm assuming that it's the cleaner I'm using that's making it so sticky. I'm using the Mean Green that Uncle Jessey on Youtube recommended and a sonic cleaner (I saw the video about the heater and yes I'm no longer filling the tub with mean green or leaving the unit plugged in) but for now I'm just trying to make it not sticky.

I'm also driven to think it's the left over cleaner that's sticky because AFTER I cleaned it I thought "Okay it's safe to touch" and after handling it a bit, the skin on the tips of my fingers started to flake off a bit. A telltale sign that you're touching heavy-duty cleaning solutions. (Wearing gloves until I KNOW that it's clean now)

I've tried warm soap and water, cold water, washing it with IPA. Nothing seems to get this thing to not be super sticky.

I'm considering not using the green stuff anymore and switching back to 99% IPA. Give me your experiences/suggestions

需要一些建議.

打掃後我的指紋也非常粘. 幾乎不可能是殘留樹脂, 因為在清潔洗衣機洗完後, 我將整晚修補這些東西, 然後用我的紫外線更近一分鐘或兩分鐘.

我假設它是我使用的清潔劑使它變得如此粘. 我使用jessey叔叔在youtube上推薦的卑鄙綠色和一個聲波清潔器(我看到了關於加熱器的視訊, 是的, 我不再是, 我不再用粗糙的綠色或離開單元插上), 但現在我只是嘗試 讓它不粘.

我也被驅使認為是左邊的清潔劑很粘, 因為清理乾淨後, 我覺得"好吧, 它 是 安全 的", 處理一下, 手指上的面板開始脫掉了. 有點. 一個告訴你正在觸控重型清潔解決方案的跡象. (戴著手套直到我知道現在乾淨了)

我試過溫暖的肥皂和水, 冷水, 用ipa一起洗. 似乎沒有甚麼能讓這東西變得超級粘.

我正在考慮不再使用綠色的東西, 並切換回99 % ipa. 給我你的經驗/建議

· 查看原文 · 為此翻譯評分

I have a strange issue I formated a SanDisk jump drive as ive been told a lot of my failures look due to the juno drive. I formated it and loaded it up. I can see the print and select it and start the print but all it does is lower the plate into the vat and stay at 0% and doesnt try to print... Any tips would be appreciated

翻譯年糕

Calling all users of Monocure 3D Rapid Grey Resin!!!

I have been printing perfect prints using Prima Creator Value UV Resin Tough Light Grey on the Photon S but now I'm trying with the Monocure one but I'm having issues.

The print comes out OK but with a serious lack of detail on the side of the model facing the supports.

The other side is fine with good details but the side facing the supports almost looks like it's melted making the finished model almost useless.

Hope somebody out there has got some good tips on how to solve the issue so I can get though the Monocure Resin and go back to Prima Creator :P

翻譯年糕

Help! Bluecast x10 printing failed/won’t stick to platform!

Printer Used: Anycubic Photon v5.5

Resin Used: Bluecast x10

Printer Settings: (see the pictures immediately below

Printing file screenshot with supports & issue pics: (see below)

Extended description:
I have tried many times and no matter what settings I choose, the print doesn't come out stuck to the platform (only one time has it come out successfully and stuck to the platform).
A lot of people have talked about this being a leveling issue but I haven't changed the leveling since the successful print.
Can you please share some tips or provide some advice about what I’m doing wrong?

翻譯年糕

I just received my first bottle of 3D Resin Solutions HERO resin in white.

Some quick searching here found that 17 seconds is a good exposure time for this one.

Anyone got any other tips/tricks for this resin before I get into it?

Thanks!

EDIT: OG Photon @ 0.05 layers

翻譯年糕

So..... My 1/7 Bell 206 cockpit - I designed, and 3d printing...
Wait for it.... I initally started doing this with resin BUT multipart-functional assembly I was struggling with shrinkage and dimensional accuracy (even when using SirayaTech)

So..... went back to FDM and switched the nozzle to 0.15 and layer height 0.05mm - printed with Prusament ASA and Extrudr PLA NX2.

YES YES....I know, it's not Photon.
But point is, I started my printing journey with resin and kind of ended up stuck in the dogma - any small detailed prints, USE resin.
It's nice to see you can really push the limits of printing on FDM and get amazing detail as well - minimum loss of fidelity! And benefit it - parts are lighter and stronger :)

Moral of the story, be pragmatic :D

所以..... 我的1/7 bell 206駕駛艙-我設計, 3 d列印...
等等.... 我initally開始用樹脂做這個, 但多功能組裝, 我正在努力使用縮水和維度(即使使用sirayatech)

所以..... 回到fdm, 把噴嘴換成0.15和0.05毫米-用prusament asa和extrudr pla nx2列印.

是的, 是的.... 我知道, 這不是光子.
但重點是, 我用樹脂開始了我的印刷之旅, 最後卡在教條中-任何小細節印花, 使用樹脂.
很高興看到你真的可以在fdm上推動印刷的極限, 並獲得驚人的細節-最低程度地失去忠誠! 並受益-零件更輕, 更強大 :)

故事的道德, 要務實 :D

· 查看原文 · 為此翻譯評分

So a good deal of my prints are having this issues in the first few layers. It’s usually on the same side. The rest of the print is flawless. Any tips? Thanks,
John

翻譯年糕

Does anyone know why my print is coming out like this? It looks like resin is pooling at the tips of my support and being cured but im not sure.

翻譯年糕

Any tips for adding resin mid-print? I want to top off my biggest print yet tonight before I go to bed.

翻譯年糕