Anycubic Photon Printer Owners 造訪社團 » EVA

原文網址 Fred Steinmann
2019-04-23 23:18:27

Anyone else having problems with slicing supports in ChiTuBox v1.4? The bottom and middle of Some supports don’t seem to be sliced into to the output, just the connection point. This is visible in the preview after slicing and in the file validator. The problem seems more prevalent with light supports.

I’ve gotten around the issue by adding supports in v1.4, saving the project and then opening the project in v1.3 for slicing.

翻譯年糕

Sen Kun
2019-04-24 03:17:28

原文網址 Wayne Rogers
2019-04-23 05:56:07

So what do you do when the model sticks Too Well to the plate?

I like to print the FDG supportless minis directly on the plate. So far it’s not been a problem until I started using Elegoo gray resin. Now the Elegoo is my favorite resin by far. But it’s sticking So well to the plate that I’m breaking the minis bases trying to get them off. I’m using a small razor blade.

Now I know I can elevate it all on supports....but I’d rather not. Seems to defeat the purpose of supportless minis.

I’ve tried bottom layer exposure times of 60, 40, and 30.

Some of the other resins I’ve used have come off the plate easier. But they weren’t resins I really liked as much as Elegoo gray.

What trick am I missing?

翻譯年糕

Joe Kushner
2019-04-23 05:58:17

Jean-François Meloche
2019-04-23 05:58:21

Joao Claudio
2019-04-23 05:59:29

Joey Pruitt
2019-04-23 06:01:41

David Marquis
2019-04-23 06:02:54

Justin Chow
2019-04-23 06:03:47

Sean Poeschl
2019-04-23 06:05:17

Alex Vee
2019-04-23 06:08:11

Jacques Abbeels
2019-04-23 06:08:18

Mark Wardle
2019-04-23 06:10:27

Ben Johnson
2019-04-23 06:18:57

Michael Earley
2019-04-23 06:19:06

Simonffy Csaba
2019-04-23 06:22:05

Danny Lloyd
2019-04-23 06:26:04

Per Bekker-Madsen
2019-04-23 06:43:22

GaryAnji Smith-Lambeth
2019-04-23 06:57:31

Nick Williams
2019-04-23 07:00:17

Chad Elstad
2019-04-23 07:04:51

Michael Van Kesteren
2019-04-23 07:14:19

Dominick Trascritti
2019-04-23 07:16:31

Neil Garrett
2019-04-23 07:24:29

Robert Fliege
2019-04-23 07:43:47

Justin Ragsdale
2019-04-23 07:44:32

Mike Michaels
2019-04-23 08:28:48

Richard Fortuna
2019-04-23 09:54:52

Wayne Rogers
2019-04-23 10:21:59

Robb Nunya
2019-04-23 10:34:41

Jacob Rahbek Møller
2019-04-23 11:27:55

Isaac Doubek
2019-04-23 15:16:38

Ivan Antharon Antalec
2019-04-23 18:05:21

Hamza Doğan
2019-04-24 03:55:21

Scott Clark
2019-04-24 04:01:07

Hamza Doğan
2019-04-24 04:02:08

Scott Clark
2019-04-24 04:03:17

Scott Clark
2019-04-24 04:04:17

Hamza Doğan
2019-04-24 04:08:14

Wesley Dowell
2019-04-24 04:41:39

Scott Clark
2019-04-24 08:50:50

John Davis
2019-04-28 06:10:20

Wayne Rogers
2019-04-28 06:37:55

Mark Wardle
2019-04-28 07:17:14

Wayne Rogers
2019-04-28 07:46:56

Mark Wardle
2019-04-28 08:16:41

조일호
2019-04-28 09:34:56

Robert Silvers
2019-04-29 20:33:38

Wayne Rogers
2019-04-29 21:50:58

Robert Silvers
2019-04-29 23:28:10

Wayne Rogers
2019-04-29 23:33:26

John Davis
2019-04-29 23:34:36

Wayne Rogers
2019-04-29 23:45:40

Robert Silvers
2019-04-29 23:45:59

John Davis
2019-04-30 00:08:59

Vinicius Silva
2019-04-30 01:52:17

Nick Williams
2019-04-30 02:49:29

Alex Vee
2019-04-30 14:57:11

原文網址 Gon Garcia
2019-04-15 22:15:48

Hey guys! sup loca people?

Quick curiosity question, if anyone can lend me a link to more data, awesome, opinions, info, free stuff accepted too in the coments (?) haha

Question: "Why do we -only- use FEP sheets on the base? Why not use glass, other heat resistant plastics, or transparent materials?" -> The question is aimed as to why not other materials, not the fact that teflon-like fep sheet is better to avoid resin stick.

No more relevant info:
Just asking out of curiosity and want to know more about it.. I know there was an alternative where you'd use some paste to avoid the resin from stickingbut that it was a pain to clean... what was this about? Why not use gorilla glass for example?

翻譯年糕

Sebastian Fernandez
2019-04-15 22:20:04

Sebastian Fernandez
2019-04-15 22:20:37

David Nicholls
2019-04-15 22:20:45

Nizhen Phang
2019-04-15 22:22:03

Stefan Lukus
2019-04-15 22:22:27

Neil Ramsay
2019-04-15 22:36:48

Csaba Bacskay
2019-04-15 23:04:55

Stefan Giudici
2019-04-15 23:27:17

Gon Garcia
2019-04-15 23:28:57

Mark Wardle
2019-04-15 23:32:02

Neil Ramsay
2019-04-15 23:43:36

Arthur Jackson
2019-04-15 23:56:22

Stefan Giudici
2019-04-16 00:16:57

Sen Kun
2019-04-16 01:24:20

Stefan Giudici
2019-04-16 01:28:49

Sen Kun
2019-04-16 01:33:05

Elvin Torok
2019-04-16 06:35:50

Gon Garcia
2019-04-17 09:53:55

Stefan Giudici
2019-04-17 09:56:47

Gon Garcia
2019-04-17 10:36:54

原文網址 Halley Oliveira
2019-04-15 16:37:54

Pessoal do Brasil, onde vocês compram a resina? Aliexpress e nem Amazon enviam para o Brasil. Banggood leva 2 meses para entregar. Pessoal do Brasil, onde vocês compram a resina? Aliexpress e nem Amazon enviam para o Brasil. Banggood leva 2 meses para entregar. 翻譯年糕

Andre Ribeiro
2019-04-15 19:53:12

Halley Oliveira
2019-04-15 20:08:18

Halley Oliveira
2019-04-15 20:08:51

Matheus Pitta
2019-04-15 21:15:43

Halley Oliveira
2019-04-15 21:19:01

Matheus Pitta
2019-04-15 21:49:17

Halley Oliveira
2019-04-15 21:53:07

Halley Oliveira
2019-04-15 21:54:05

Andre Ribeiro
2019-04-15 22:20:09

Matheus Pitta
2019-04-15 22:52:09

Mark Wardle
2019-04-15 23:01:37

Sergio Nunes
2019-04-15 23:34:30

Matheus Pitta
2019-04-15 23:35:42

Sergio Nunes
2019-04-15 23:35:55

Andre Ribeiro
2019-04-16 03:37:21

Mark Wardle
2019-04-16 03:43:16

原文網址 John VanRyn
2019-04-04 07:13:21

ok it is in the mail.. so.. slicing/supports/etc.. should I use stock software and auto supports? should I place them myself? what is the PhotonFileValidator and how/why should I use it?

翻譯年糕

原文網址 Bo Nørgaard
2019-04-03 06:02:37

Photon File Validator 2.0

While we wait for the AA upgrade, I have updated the Validator to support Photon files with AA information.

So now you can:
- Save version 1 files in the new version 2 format
- Add AA to non AA files
- Convert between no AA, 2, 4, 8, and 16 layers AA
- Calculate AA by Gaussian Blur, Blur or Smooth (3x or 5x)
- Define your own 5x5 box filter for AA calculation
- View detailed AA information in your layers
- Play view of all your layers (and AA layers)
- Change edit mode from swap to on/off

You can download the new version here:

https://github.com/Photonsters/PhotonFileValidator/…/tag/2.0

翻譯年糕

Vinicius Silva
2019-04-03 06:18:02

Bo Nørgaard
2019-04-03 06:27:38

Jeremy Lauzon
2019-04-03 06:42:19

Vinicius Silva
2019-04-03 06:44:08

Kevin Miller
2019-04-03 07:15:01

Mitchell Kruik
2019-04-03 07:15:48

Nickolaus Oneal
2019-04-03 07:25:35

Vinicius Silva
2019-04-03 07:29:15

Hussain A K
2019-04-03 07:38:45

Vinicius Silva
2019-04-03 07:43:19

Hussain A K
2019-04-03 07:45:57

Mitchell Kruik
2019-04-03 08:55:44

Sergio Albeiro Gonzalez Mendoza
2019-04-03 11:44:46

Tomislav Štampar
2019-04-03 12:16:33

Bo Nørgaard
2019-04-03 13:07:44

Ivan Lobachev
2019-04-03 13:20:09

Tomislav Štampar
2019-04-03 13:25:07

Joan BG
2019-04-03 13:30:32

Gon Garcia
2019-04-03 13:45:57

Keith Hebard
2019-04-03 13:47:05

Gon Garcia
2019-04-03 13:49:06

Guti Gutmann
2019-04-03 14:01:24

Bo Nørgaard
2019-04-03 14:26:11

Luke Ripley
2019-04-03 14:47:35

Sen Kun
2019-04-03 14:49:28

Sen Kun
2019-04-03 14:51:01

Tomislav Štampar
2019-04-03 14:57:53

Obe Bradford
2019-04-03 15:45:44

Sen Kun
2019-04-03 16:25:46

Sen Kun
2019-04-03 16:27:39

Sen Kun
2019-04-03 16:29:54

Luke Ripley
2019-04-03 16:38:40

Sen Kun
2019-04-03 17:20:32

Obe Bradford
2019-04-03 17:27:41

Vinicius Silva
2019-04-03 17:34:03

Vinicius Silva
2019-04-03 17:35:55

Vinicius Silva
2019-04-03 17:37:36

Vinicius Silva
2019-04-03 17:39:42

Vinicius Silva
2019-04-03 17:41:43

Luke Ripley
2019-04-03 17:42:52

Sen Kun
2019-04-03 17:45:21

Sen Kun
2019-04-03 17:51:24

Diego Aguilera
2019-04-03 17:52:11

Sen Kun
2019-04-03 17:52:43

Sen Kun
2019-04-03 17:54:36

Vinicius Silva
2019-04-03 18:05:22

Vinicius Silva
2019-04-03 18:08:49

Diego Aguilera
2019-04-03 18:11:44

Vinicius Silva
2019-04-03 18:26:37

Obe Bradford
2019-04-03 19:16:59

Sen Kun
2019-04-03 19:23:00

Vinicius Silva
2019-04-03 19:32:22

Vassilis Finellis
2019-04-03 23:16:39

Muhammad Zulkhairol Yacob
2019-04-04 01:27:01

Zena Andreou
2019-04-04 01:31:57

Bernie Horowitz
2019-04-04 04:37:45

Soraya Gouvea
2019-04-04 04:43:11

Vinicius Silva
2019-04-04 04:44:50

Mauro Gaspar
2019-04-04 05:28:29

Vinicius Silva
2019-04-04 05:47:40

Bo Nørgaard
2019-04-04 05:50:10

Harry 'Skip' Baker
2019-04-04 08:04:59

Mauro Gaspar
2019-04-04 09:06:11

Mauro Gaspar
2019-04-04 09:13:28

Bo Nørgaard
2019-04-04 13:16:10

Beat Grendelmeier
2019-04-04 15:06:18

Bo Nørgaard
2019-04-04 15:13:03

Beat Grendelmeier
2019-04-04 15:15:25

Bo Nørgaard
2019-04-04 15:25:34

Bo Nørgaard
2019-04-04 15:26:04

Vinicius Silva
2019-04-04 17:33:12

Beat Grendelmeier
2019-04-04 18:42:27

Sen Kun
2019-04-04 23:09:16

Beat Grendelmeier
2019-04-04 23:14:52

Breno Azevedo
2019-04-05 01:27:09

Adam Greenwood
2019-04-06 15:36:12

Bo Nørgaard
2019-04-06 17:08:26

Chris Makris
2019-04-07 05:42:44

Adam Greenwood
2019-04-08 07:16:11

Oni Cron
2019-04-08 19:10:24

Kevin Hull
2019-04-09 23:01:50

Vinicius Silva
2019-04-10 02:22:20

Bo Nørgaard
2019-04-10 03:35:25

Kevin Hull
2019-04-10 08:48:03

Marc Doumayrou
2019-04-25 06:09:07

Bo Nørgaard
2019-04-25 12:58:01

Alex Shpisman
2019-04-26 03:22:24

Bo Nørgaard
2019-04-26 04:03:44

Alex Shpisman
2019-04-26 04:11:13

Alex Shpisman
2019-04-26 04:16:41

Alex Shpisman
2019-04-26 04:17:56

Bo Nørgaard
2019-04-26 04:38:41

Alex Shpisman
2019-04-26 04:50:05

Alex Shpisman
2019-04-26 04:54:33

Bo Nørgaard
2019-04-26 05:10:21

Alex Shpisman
2019-04-26 06:02:29

Vinicius Silva
2019-04-26 06:42:54

Alex Shpisman
2019-04-26 07:14:36

Alex Shpisman
2019-04-26 07:18:03

Bryce Barbato
2019-04-29 22:20:38

Chris McDermott
2019-05-01 21:42:23

Muhammad Zulkhairol Yacob
2019-06-28 00:45:48

Guido A. Mandorf
2019-07-19 04:04:22

Dana Moore
2019-09-14 23:01:25

原文網址 Jean-François Meloche
2019-04-01 05:42:42

I've recently started using a Dremel to post process my prints. I use a small Xacto to remove the majority of supports, and do the fine cleanup with the Dremel. I've gotten great results you can't tell its a printed model.

Model is a Myconid Colossus from Evan Carothers Kickstarter Skyless Realm.

翻譯年糕

Rainer Hummelsbeck
2019-04-01 06:18:25

Marcin Kudzia
2019-04-01 16:41:33

原文網址 Paul Cliff
2019-03-28 20:58:11

This may be more of a general question, but I'm probably going to get the Photon to print it so it's relevant:

What's the smallest thickness that these printers can do? I'm used to designing for FDM but I'm currently designing a Mouse Droid for printing at 1:12th scale (about 21mm) tall.

Some of the smaller parts are around 0.05mm thick (see the blue lines).

I just want to be sure that it's going to print, or should I be making some changes now before I try?

Any info would be greatly appreciated! Thanks.

翻譯年糕

Paul Cliff
2019-03-28 23:19:59

Francesco Peeters
2019-03-28 23:25:12

Eric Wilfreesboro
2019-03-28 23:26:16

Eric Wilfreesboro
2019-03-28 23:26:22

Paul Cliff
2019-03-28 23:31:01

Dylan Hancox
2019-03-28 23:35:34

Paul Cliff
2019-03-28 23:40:24

Eric Wilfreesboro
2019-03-28 23:48:04

Dylan Hancox
2019-03-28 23:50:13

Eric Wilfreesboro
2019-03-28 23:50:42

Eric Wilfreesboro
2019-03-28 23:51:14

Paul Cliff
2019-03-28 23:51:46

Paul Cliff
2019-03-28 23:52:17

Eric Wilfreesboro
2019-03-29 00:36:07

Dylan Hancox
2019-03-29 00:49:24

原文網址 Ocie Ward
2019-03-27 13:38:47

Howdy, y’all. I have a new Photon S, and I can’t get it to print. I have a lot of FDM experience, but this is my first resin printer. I will contact Anycubic tomorrow, but I figured I’d post here to see if anyone has had a similar experience:
Whether I slice in the Photon slicer or ChiTuBox (exporting to filetype .photons), I have the same problem. The sliced file looks fine if I re-open it in the slicer - the layers have images that step through correctly. When I load the files on the printer, I see them correctly in the print screen, including the little 3D thumbnail image. But when I print any of them, I get zero curing. I confirm that the UV lamp is coming on correctly for the amount of time per layer that I set in the slicer - I can see it through the crack in the case above the UI screen. But the LCD is fully masked - the whole screen is activated to block the UV. So no curing happens. This happens with every file I slice in either slicer. This same thing happens with the PHOTON.photons presliced lattice cube that came with the printer. Also, I think the image on the UI is supposed to show an image of the mask for each layer, right? Well it shows a solid black layer each time, so that and the LCD are in sync.

Additional information:
- build plate is level and zero’d. I tried both the paper method and the Flint Read method. Anyway, this is irrelevant because the problem is with the mask and not with the leveling.
- the LCD test is successful. I see the rectangle. It just doesn’t work right when reading a sliced file.
- I tried using the Photonsters sliced file editor to see if I could figure out what is wrong inside the .photons files. But the tool only works with .photon and not with .photons files.
* another possibly important piece of info is that after I run a print, whether I cancel it or let it run to completion, the printer UI freezes on the print screen. The UI screen is unresponsive and I have to flip the power switch.
- power cycling the printer will reset things, but I still have the same issue the next time around.
- I checked the cat to see if I somehow missed a protective liner sheet that was on the FEP and somehow blocked UV, but no. Also, I can see that the LCD is masking every pixel when the UV lamp comes on.

* one idea - in order to export to .photons from chitubox, I had to set up a new generic printer config from scratch. I set all the parameters to be the same as the settings that come up if you select a default Photon config. The only exception being that on the advanced tab on a new config, there are gcodes defined so you can make your files talk correctly to your given printer. The default Photon config does not even show these gcodes, so I have no idea of what is automatically populated for a generic printer config. I left them as they were auto generated and sliced the file. Then, the FIRST sliced file I ran on the printer was one that I sliced with this config in chitubox. I wonder if those gcodes were wrong, and were saved to the printer EEPROM. Now perhaps every print that I run, even if sliced in the photon slicer, doesn’t work because there’s a bad gcode for “activate lamp” or something saved in there. That doesn’t actually make sense with how I understand gcode to work, but I’m grasping at straws here. Actually, do these Photon printers even use gcode?

Anyway, sorry for the novel, but I’m pretty frustrated with my resin experience so far. At least now I figured out that the mask is the issue - I just need to figure out WHY it’s not actually following the layer images in the sliced file...

翻譯年糕

Stefan Giudici
2019-03-27 13:47:10

Ocie Ward
2019-03-27 13:49:53

Ocie Ward
2019-03-27 13:51:19

Ocie Ward
2019-03-27 13:51:51

Jeremy Lauzon
2019-03-27 14:17:18

Graham Leek
2019-03-27 14:34:47

Sen Kun
2019-03-27 14:35:44

Ocie Ward
2019-03-27 14:53:50

Jeremy Lauzon
2019-03-27 14:56:35

Björn Ståhlnacke
2019-03-27 14:57:38

Ocie Ward
2019-03-27 15:00:26

Sen Kun
2019-03-27 15:01:43

Ocie Ward
2019-03-27 15:03:57

Ocie Ward
2019-03-27 15:04:25

Jeremy Lauzon
2019-03-27 15:04:27

Ocie Ward
2019-03-27 15:05:30

Kevin Boogaard
2019-03-27 16:10:55

Dylan Hancox
2019-03-27 16:25:05

Norbert Kupeczki
2019-03-27 17:25:22

Adrian Petre
2019-03-27 17:52:16

Patrick Nixon
2019-03-27 18:55:44

Bradley VanScoyk
2019-03-27 19:19:08

El Ner Endem
2019-03-27 20:30:03

Mike Roof
2019-03-27 21:38:28

Ocie Ward
2019-03-27 21:50:54

Ocie Ward
2019-03-27 21:53:57

Ocie Ward
2019-03-27 21:55:01

Ocie Ward
2019-03-27 22:26:46

Ocie Ward
2019-03-27 22:44:09

Ocie Ward
2019-03-28 00:02:31

Piet Hoton
2019-03-28 00:31:37

Ocie Ward
2019-03-28 00:51:39

Ocie Ward
2019-03-28 01:20:10

Ocie Ward
2019-03-28 01:23:59

Sen Kun
2019-03-28 05:55:30

Ocie Ward
2019-03-28 06:04:22

Jeremy Lauzon
2019-03-28 06:06:01

Alex Varley
2019-03-28 06:07:59

Ocie Ward
2019-03-28 06:13:21

Stefan Giudici
2019-03-28 06:21:32

Ocie Ward
2019-03-28 06:27:47

Ocie Ward
2019-03-28 06:30:49

Sen Kun
2019-03-28 06:39:36

Ocie Ward
2019-03-28 06:52:21

Alex Varley
2019-03-28 15:32:55

Ocie Ward
2019-03-29 04:05:08

Patrick Nixon
2019-03-29 04:49:25

Sen Kun
2019-03-29 13:22:16

Ocie Ward
2019-03-29 13:33:37

Sen Kun
2019-03-29 14:40:13

Ocie Ward
2019-03-29 21:44:56

Ocie Ward
2019-03-30 02:14:38

Ed Wilson
2019-03-30 02:27:19

Jeremy Lauzon
2019-03-30 02:29:57

Ocie Ward
2019-03-30 02:51:38

Ocie Ward
2019-04-30 06:36:37

Ocie Ward
2019-04-30 06:36:46

Sen Kun
2019-04-30 12:10:49

Ocie Ward
2019-05-01 01:29:56

Jose Elizondo
2019-05-03 11:35:27

Ocie Ward
2019-05-03 11:55:57

Mark Wardle
2019-05-03 12:02:11

Ocie Ward
2019-05-03 12:04:47

Ocie Ward
2019-05-17 03:07:37

原文網址 Igor Lebedev
2019-03-22 19:17:21

I had a weird bug today with my Photon-S. So I've started a print and after a first layer it just stopped printing, and the control screen was completely unresponsive. I turned it off with a switch, took out a build plate and realized I forgot to screw in the VAT ? Cleaned the build plate and VAT from a residue, started again and the same thing happened with now a secured VAT. Tried a dry run and it seemed to be printing, tried with a resin and it seems to be printing normally now. What could it be? USB stick or a photon issue?
Also, my settings are (if its at all relevant):
0.05
5 bottom@120sec
normal 4 sec@ 1 sec off time

Also, the first layer printed out and stuck to the buildplate like normal. And I am using a SanDisk usb stick not an included one.

翻譯年糕

Sen Kun
2019-03-22 19:56:53

陳彦廷
2019-03-22 20:04:08

全不選發文排行