Anycubic Photon Printer Owners 造訪社團 » EVA

Nueva resina blue cast cr3a en principio... ??

翻譯年糕

Hello new photon owner here.
I’ve done a ton of researching and looked over almost the entire photonsters website and several Chitubox YouTube videos and altered the supports settings accordingly in anticipation of the machine arriving but the one thing I can’t find are the settings options for exposure time etc. Can anyone help me out ?
I’ve added the normal photon option in chitubox but I’m not sure if that’s right.

Oh I’ve also got all the relevant protection and curing stuff either now or incoming too as well as a curing box so it’s basically the settings I’m missing to start up

翻譯年糕

So my first question out of many I will have because I love this printer and I want to do so much more is about isopropyl alcohol. Because temps where I’m from will be dropping in the next few weeks we plan on moving our printer to a new area and luckily the only smell I’ve had issue with is the isopropyl. But is there a way to strain the resin from the ipa or do I just have to let it evaporate and then cure the leftover residue to dispose of it safely?

翻譯年糕

Hi Folks, I'm having some serious problems with this printer suddenly, Here's all the relevant info:

Resin: Monocure Rapid Gunmetal Grey (Settings in Picture)

Chitubox Version: v1.4.0

So I've just switched back to using the gunmetal grey that I originally used to great success. New bottle, but no prints would stick to the plate, only the FEP. I tried the different settings profiles from the Google Doc but to no avail. I tested the frequency of the FEP and found it to be a little low, so I replaced it as I have been using the same one for almost a year now (cloudy and scratched etc). Tested the new FEP frequency and it was perfect. Tried it again with the settings posted, and still the print comes straight off of the plate after 3 or 4%. Monocure plate bond was used every time, and I have also been checking the files with the validator program. At the start of each print I can hear the popping sound of the FEP releasing from the cured resin (as it should) but then it goes quiet almost immediately. I'm completely stumped as to what's wrong with this thing, and I have commissions that i've had to push back for a week now because of this. I've even pre warmed the resin, relevelled copious amounts of times with the flint reed method (Which has always worked wonders for me) and cleaned the machine inside and out.

ANY advice is most greatly appreciated

翻譯年糕

Hi all, i want to share the Chess Set I did for my upcoming son 40th B-day …. I did it using multiple media and technics … for the Chess Board I have use a Pine Board 16 “ x 16 “ that I primed Grey and then Cut in ¼ “ MDF,64 Frames to accept 64 > 3 d Printed Squares and then Painted each of them parts accordingly to the desired results.. many coats of Primer and Paint and at the end 10 coats of Clear Gloss finish … For the Chess Pieces I used Multiple Style of design … meaning that I wanted an Oriental /Medieval theme all Printed on both my Photon and Photon S .. After that Primed and painted with many coats of paint and clear … hope you like the end Results >>>> do not ask me how many hours but I know that it exceed 150 hrs. And took me 4 weeks from start to end …

翻譯年糕

My own model of the Willie Wonka elevator. Printed on the photon S with Siraya tech blue.

翻譯年糕

Here is my latest print, the EVA-01 from Evangelion, printed with my anycubic photon and used the HARZ labs black resin, you can take the stl here :
https://www.thingiverse.com/thing:2983877

翻譯年糕

Hey uhhh photon newbie here, does anyone seem to understand why this failed? This was the test print on the flash drive included with the photon S. It looks like it was printing fine for a bit then the side just snapped off and it ended up getting squished in between the print and the fep.

- I know the white residue is from not letting the alcohol completely evaporate. -

I assume the print would fail earlier if the buildplate was uneven right? Is this something that pertains to exposure time? I’m using the anycubic green that was included with the printer. Any tips appreciated, ladies and gentlemen. Thank you in advance!

翻譯年糕

Since the fan on my printer seems to evacuate from rhe bottom... has anyone made a base withhose to outside to evacuate fumes whyle printing..?

翻譯年糕

Hi all!
Is there a way to write something into the photon print file to pause at a certain height (for a colour change)?

I had a search but couldn't find a relevant threads here or on the GitHub (but I'm on mobile so please forgive me if I missed something).

翻譯年糕