Anycubic Photon Printer Owners 造訪社團 » 支援

Hi All

Pleased to meet you :)

Recieved my Photon 3 days and a starter bottle of the Soy resin in grey.

I mainly design Silver Jewellery and replacement/mods parts for collectible toys and dioramas.

Till now I have been using Shapeways and Commercial casters for my 3D printing needs but am hoping to find a resin that will suitable for Loss wax casting.

After a bit of play starting to get some good prints.

Would I be right in saying the Soy based resin is better for organic models then high detail sharp edge model?

These where printed together and the Dragon head pendant is better then what I get from commercial casters Wax printers but the Templar ring is missing some of the sharpness . The Spartan shield is not round looks like I needed more supports at the bottom.

I guess that will do for a first post :)

大家好

很高興認識你 :)

收到了我的光子3天和一瓶灰色的大豆樹脂.

我主要設計銀珠寶和更換/ mods部件, 用於收藏玩具和dioramas.

到目前為止, 我一直在使用形狀和商業casters來滿足我的3 d列印需求, 但希望找到適合丟失蠟鑄造的樹脂.

在玩一會之後, 開始得到一些很好的指紋.

我說大豆為基礎的樹脂對有機模型更好, 然後高精細鋒利的模型嗎?

這些一起印制和龍頭吊墜比我從商業casters蠟印表機那裡得到的更好, 但聖殿環錯過了一些鋒利. 斯巴達盾牌不是圓的, 看起來我需要更多底部的支援.

我想第一篇帖子就足夠了 :)

· 查看原文 · 為此翻譯評分

Hello.I designed this gearbox for 550 motor and printeed with my tevo.reduction ratio i=6.I think you use this gearbox for your projects so i shared it.Andd if you like video please support my channell Thank yo everyone:)

你好. 我設計了這個gearbox, 用我的teevo列印. 減少比例i= 6. 我想你在你的項目中使用這個gearbox, 所以我分享了它. 如果你喜歡視訊, 請支援我的頻道, 謝謝大家 :)

https://youtu.be/to3iyVzZFII

· 查看原文 · 為此翻譯評分

Hi.

I've got question. I used to run Photon and decided to "upgrade" to Zortrax Inkspire some time ago. but I've got quality issues. I use original and 3rd party resins.

I've been searching they FB group and tried with customer support, but they keep saying it's either no problem or area temperature difference causing these issues...

I have funny sagging/ deformations at support-part contact point. Does anyone know what could be a reason?

I started pre-warming resin and keep 22-24C around printer, resin's well stirred (no bubbles), slowed lifting speed, increased exposure and exp time-off, new fep, tried hollowed or full body (no difference), thickened supports too (2mm pillar and 1mm tip) Printer's in stable position and all leveled.

I think it could be either mechanical issue or something is wrong with LEDs, but it's only guessing.

I understand it's different printer, but maybe someone came across similar issue and could help me to resolve it.

Thank you very much for your help.

嗨.

我有個問題. 我曾經運行photon, 不久前決定"升級" zortrax inkspire. 但我有質量問題. 我使用原創和第三方樹脂.

我一直在搜尋他們的fb組, 並在客戶支援下嘗試, 但他們一直說, 要麼沒有問題, 要麼地區溫度差異導致這些問題...

我在支援部分接觸點有滑稽的低調/變形. 有人知道甚麼可能是原因嗎?

我開始預熱樹脂, 在印表機周圍保持22-24 c, 樹脂的井噴(無泡沫), 減慢, 增加曝光和exp, 嘗試空洞或全身(無差別), 厚 也支援(2毫米柱和1毫米提示)印表機處於穩定的位置, 全部平穩.

我認為這可能是機械問題, 或者led有問題, 但它只是猜測.

我理解這是不同的印表機, 但也許有人遇到了類似的問題, 可以幫我解決它.

非常感謝您的幫助.

· 查看原文 · 為此翻譯評分

Ok. I printed this building, and the front side failed to stick to the plate. So I rotated it 180° and tried again. The portion that failed before worked, but then the opposite side failed. Her are my supports and settings.

Is it a leveling issue, is the fep too loose/tight. Elegoo grey.

好吧. 我列印了這棟建築, 而前方沒能堅持到盤子上. 所以我旋轉了180°並再試一次. 之前失敗了, 但後來對方失敗了. 她是我的支援和設定.

這是一個平穩的問題, fep太鬆松/緊了. Elegoo grey.

· 查看原文 · 為此翻譯評分

Hello all! I just got my Anycubic Photon printer last night. I'm 100% new to 3D printing (I'm primarily an artist that creates 3d models and illustration but I've always wanted to have my models printed physically.) I have TWO Questions, with images provided.

Firstly, I printed a tiny benchy as a test of the Printer.
The print went well for most of the model but towards the end, Benchy fell off the print bed for some reason. I found it floating in the resin vat.
Could this be due to a leveling issue, or perhaps an exposure duration issue? Or a mix of both? Any advice in identifying the issues when it comes to learning the mysterious process of printing as a newbie to all this?
I believe the settings in the file were as follows

Layer Thickness: 0.05
Exposure time: 10.5
Off Time: 1
Bottom Exposure Time: 80
Bottom Layers: 8

- - - -

Secondly,
I want to print the model I made of one of my characters. He's definitely more complex than a basic Benchy Boat, and I used the provided Slicer software to auto-generate supports. My question for this model would be:
1. Does it need supports added at the tip of the braid and sidebangs? Or will those (ideally) cure to the printer bed and form as it rises?
2. Would the settings shown in the image be adequate exposure and layer thickness time for this type of a model?

Sorry for all the noob questions. But I appreciate any input, as well as any helpful links and resources so I can do some reading on my own as well.
Thank you! :)

大家好! 我昨晚剛拿到了我的任何立方體光子印表機. 我對3 d列印是100 %的新手(我主要是一個製作3 d模型和插圖的藝術家, 但我一直想要把我的模特列印出來.)我有兩個問題, 提供了影象 "我想讓我們知道,

首先, 我列印了一個小小的基準作為印表機的測試.
大多數模型的印刷品都很好, 但最終, 基準因某種原因從印刷床上掉下來. 我發現它漂浮在樹脂增值稅.
這可能是因為一個平穩的問題, 還是曝光時間問題? 還是兩者混合? 當學習作為新手印刷的神秘過程時, 有甚麼建議來識別問題嗎?
我相信檔案中的設定如下

層厚度: 0.05
曝光時間: 10.5
休息時間: 1
底部曝光時間: 80
底層: 8

- - - -

第二,
我想列印我用我的一個角色製作的模型. 他絕對比基本的基準船複雜, 我使用了提供的切片軟體自動生成支援. 我對這個模型的問題是:
1., 它是否需要在braid and sidebang頂端新增支援嗎? 或者那些(理想)會治癒印表機床, 隨著印表機上升時形成?
2. 影象中顯示的設定對於這類模型來說是否足夠曝光和層厚度時間?

抱歉所有的新手問題. 但我感謝任何投入, 以及任何有用的連結和資源, 這樣我也可以自己閱讀.
謝謝! 你知道嗎?

· 查看原文 · 為此翻譯評分

Tested out the Anycubic Eco resin on a sculpt I did for a client and the result turned out better than I expected at 0.05 layer. I used the photon file validator that I saw recently on 3DPrintFarm's YouTube video and I have to say it's a life saver. I've been using Prusa slicer to build my automatic supports, then run it through that software and finally add light supports in chitubox on every island it shows me unsupported. By the end I still get warnings (ranging from 10 to 30 and between 1 to 5 pixels), which I end up not considering.

I definitely want to reduce failed prints and with the eco resin (which is so much better than the elegoo black I was using) plus the combo of Prusa slicer+chitubox+photon file validator (and loads of hours of patience) I feel I'm on the right track.

Good prints everyone!

在我為客戶做的雕塑上測試了生態樹脂, 結果比我預期的要好. 我用了最近在3 dprintfarm的youtube視訊上看到的光子檔案驗證器, 我不得不說它是一個救生者. 我一直在使用prusa slicer來建立我的自動支撐, 然後通過軟體運行, 並最終在chitubox中新增燈光支援. 到最後, 我仍然收到警告(從10到30到5畫素之間), 但最後我沒有考慮.

我絕對想要減少失敗的指紋, 用生態樹脂(比我使用的elegoo black好多)加上prusa slicer+chitubox+photon檔案驗證器(和大量的耐心)我覺得我覺得自己在正確的軌道上 "我想讓我們知道,

大家的好指紋!

· 查看原文 · 為此翻譯評分

Alright, I'm driving myself crazy trying to figure this out. How would you guys orient and support this little imp? I can't figure out how to do it without there being tons of supports. I'm printing it for a friend to repay a favor, so I'd like it to turn out nice. Please and thank you!

好吧, 我正在把自己逼瘋了, 試圖弄明白這一點. 你們會如何定向和支援這個小imp? 沒有大量的支援, 我無法想出如何做到這一點. 我正在列印它, 讓朋友報答, 所以我希望它變得不錯. 請謝謝!

· 查看原文 · 為此翻譯評分

Having a strange print issue:

Let's see if I can explain this, photos to come later once I get home.

Using the anycubic slicer, latest version, I insert/load my STL and add supports however, when I go to slice the file... some of the support goes away (overall model height shrinks).

And.. to boot the printer printed a raft, which I did not want... and the model was buried in the raft with some details/parts unusable.

Like previously stated, I'll add some photos of last night's print... it has been bugging me today.

有奇怪的列印問題:

讓我們看看我能不能解釋一下, 我回到家以後的照片.

使用anycubic slicer, 最新版本, 插入/載入我的stl並新增支援, 但是當我去切片檔案時... 部分支援消失了(整體模型高度縮小).

還有.. 啓動印表機印表機印表機, 但我不想要的... 模型被埋在木筏裡, 有些細節/部件無法使用.

如前所述, 我將新增一些昨晚列印的照片... 今天一直困擾著我.

· 查看原文 · 為此翻譯評分

Advertising: Please keep advertising posts to no more than 1 a week. Please also contact an admin if you wish to make a post: Kevin , Toby , Mark , Vinicius , Flint .

1) Document Repository on Github. Lets face it, anything is better than Facebook's file section: https://github.com/Photonsters/anycubic-photon-docs

2) Photon Tips and Tricks by Flint Read tons of great information here : https://www.facebook.com/groups/AnycubicPhoton/permalink/1295545357256770/ - How to level your bed: https://youtu.be/roAqm5c3rfU

3) We have a special code for 10% off the your order for Monocure 3D Resins. Use the code MONOPHOTON on your orders (From the Monocure Website). Go here for the post from Charlie Anderson : https://www.facebook.com/groups/AnycubicPhoton/permalink/1285403291604310/

4) Mark Wardle has released some great videos on getting up to speed on printing on the Photon.

Preparing Models to print: https://youtu.be/R7mFeK47pAI

Multi Part Models: https://youtu.be/jG_hd_9QzIM

Add Crossbeam support with B9: https://youtu.be/dODkIIUIUso

5) Artur Fuste has put together this awesome guide to resins, and keeps it updated: https://docs.google.com/…/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s…/

If you are curious where to start with any resin, this is the place to look.

6) Looking to Purchase?

Anycubic Resin on Amazon: https://amzn.to/2rAbQVx

7) Photon Converter V2 : .photons, .photon, .pws, .cbddlp, AA support. https://www.facebook.com/groups/AnycubicPhoton/permalink/1828504693960831/

廣告: 請將廣告貼文保持在每周不超過1個. 如果你想釋出帖子, 請聯絡管理員 :,,

1) github檔案存放處. 讓我們面對現實吧, 任何事情都比facebook的檔案部分更好:

2)弗林特的光子技巧和技巧閱讀了大量的資訊: https://www.facebook.com/groups/AnycubicPhoton/permalink/1295545357256770/-如何平穩你的床 : https://youtu.be/roAqm5c3rfU

3)我們有一個特殊程式碼, 可以折扣您的單治癒3 d樹脂訂購10 %折扣. 在您的訂單中使用單個程式碼(來自monocure網站). 到這裡獲取查理·安德森的帖子: https://www.facebook.com/groups/AnycubicPhoton/permalink/1285403291604310/

4) mark wardle釋出了一些關於加速在光子上列印速度的精彩視訊.

準備列印模型:

多部分模型:

用b9新增橫梁支援:

5) artur fuste編集了這本很棒的樹脂指南, 並不斷更新: https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/

如果你想知道從樹脂開始, 這裡就是尋找的地方.

6)想購買?

亞馬遜上的任何立方體樹脂: https://amzn.to/2rAbQVx

7)光子轉換器v2: 光子, 光子. Pws, Cbddlp, aa支援. https://www.facebook.com/groups/AnycubicPhoton/permalink/1828504693960831/

· 查看原文 · 為此翻譯評分