Hi.
I've got question. I used to run Photon and decided to "upgrade" to Zortrax Inkspire some time ago. but I've got quality issues. I use original and 3rd party resins.
I've been searching they FB group and tried with customer support, but they keep saying it's either no problem or area temperature difference causing these issues...
I have funny sagging/ deformations at support-part contact point. Does anyone know what could be a reason?
I started pre-warming resin and keep 22-24C around printer, resin's well stirred (no bubbles), slowed lifting speed, increased exposure and exp time-off, new fep, tried hollowed or full body (no difference), thickened supports too (2mm pillar and 1mm tip) Printer's in stable position and all leveled.
I think it could be either mechanical issue or something is wrong with LEDs, but it's only guessing.
I understand it's different printer, but maybe someone came across similar issue and could help me to resolve it.
Thank you very much for your help.
嗨.
我有個問題. 我曾經運行photon, 不久前決定"升級" zortrax inkspire. 但我有質量問題. 我使用原創和第三方樹脂.
我一直在搜尋他們的fb組, 並在客戶支援下嘗試, 但他們一直說, 要麼沒有問題, 要麼地區溫度差異導致這些問題...
我在支援部分接觸點有滑稽的低調/變形. 有人知道甚麼可能是原因嗎?
我開始預熱樹脂, 在印表機周圍保持22-24 c, 樹脂的井噴(無泡沫), 減慢, 增加曝光和exp, 嘗試空洞或全身(無差別), 厚 也支援(2毫米柱和1毫米提示)印表機處於穩定的位置, 全部平穩.
我認為這可能是機械問題, 或者led有問題, 但它只是猜測.
我理解這是不同的印表機, 但也許有人遇到了類似的問題, 可以幫我解決它.
非常感謝您的幫助.
·
查看原文
·
為此翻譯評分
Nipuna Gunarathne
2020-01-04 02:55:26
Wojciech Majkut
2020-01-04 03:04:45
Wojciech Majkut
2020-01-04 03:12:41
