Anycubic Photon Printer Owners 造訪社團 » PID

原文網址 Calvin Vong
2020-03-27 15:35:35

Hi, newbie here. I have been having trouble printing flat surfaces on an angle (45 deg). From the cube pictures, it's a cube with 2mm wall thickness, you can see that the cube deformed a bit at the bottom and a few layers got bent. Similar thing happened when I tried to print a small spur gear on an angle. The bottom part is also deformed. What could cause this? Not enough support? exposure time?

Also, if anyone has experience printing spur and bevel gears, what's the best way to orientate and support it without impacting the teeth. My gears has module=0.5, pretty small LOL.

I am using the monocure rapid grey, printed at 8s exposure and 50um layer height.

Thanks!!

翻譯年糕

John Chrapkowski
2020-03-27 15:37:23

Put one thick support right on that bottom corner then smaller ones up the edges

Calvin Vong
2020-03-27 18:23:33

thanks, I will try that

Mario Hippmann
2020-03-27 22:18:25

more supports overall

Keith O'Donnell
2020-03-28 00:36:15

From what I’ve heard, you really don’t want to make gears without resin.

Scott Pavlich
2020-03-28 04:51:54

Keith O'Donnell Yeah there’s people saying that and I don’t know why. I’ve had great success with both gears and threads

Calvin Vong
2020-03-28 09:01:02

I think the main reason is probably because resin is brittle, hence bad for gear application. But I think it's good enough for prototype purpose, and add some flex resin would help with durability I think.

Scott Pavlich
2020-03-28 09:29:21

Calvin Vong Yeah...you gotta use the right stuff...I use Siraya abs mixed with tenacious

原文網址 Giuliano Fragola
2020-03-24 18:23:56

未提供相片說明。還有 6 張 Giuliano Fragola 3月24日下午6:23

Si no tienes impresora 3d onse te acaba la resina de imprimir, tb se pueda hacer

Silicona de duplicar # zetalabor # labosil o similar, resina de laboratorio # ivoclar y un poco de maña.
No es tan chick como en 3d, pero protege igual

# unamascaraunavida

A los fabricantes de resinas de laboratorio y siliconas, si podeis mandarme material hare mas y mas rapido.
Se me agotan las existencias
Contactar conmigo.

翻譯年糕

Kay Bartel
2020-03-24 18:34:01

Von den Teilen haben wir um Krankenhaus noch genug, da wir sie generell wiederverwenden/desinfizieren. Die Folienschilde hingegen werden langsam weniger. Was aktuell viel knapper ist, sind FFP2+3 Masken und normaler Mundschutz.

John Bubuz
2020-03-25 18:12:40

Aaron Dunster
2020-03-28 08:26:59

Could you not just Print a rig to bend aluminium too that shape and you could produce probably a few dozen a hour if optimized well

Giuliano Fragola
2020-03-28 15:39:47

Aaron Dunster do it that way.
I hace this process under control and don’t want to modify it.
But thanks 4 your suggestions

Aaron Dunster
2020-03-28 15:59:33

Giuliano Fragola no problem mate, the journey of an idea ☺

原文網址 Lee Rogers
2020-03-20 17:31:11

This maybe a stupid question...can you get dodgy bottles of resin?
I have a bottle of grey and black anycubic and a bottle of elegoo clear blue. All recommendations the same 60/8 seconds. This is what I have set out to in the slicer. was using the Anycubic grey and getting great results (pic 1). I then switched to the black Anycubic (same settings) to print a simple base for a model. I've tried upright, 45 degrees, flat, all raised on supports etc but 5 failed prints. Either supports breaking, not sticking to build plate, but mostly resin forming on the FEP which I've had to empty and peel off (pic 2 and 3).
I thought it was the screen so swapped to translucent blue, exactly the same settings, could see the screen working through the resin , and it printed a random print perfectly first go (last pics) ?‍♂️ what's going on with this black resin?

這可能是個愚蠢的問題... 你能得到一瓶樹脂嗎?
我有一瓶灰色和黑色的任何立方體和一瓶elegoo清白藍色. 所有推薦的60/8秒. 這就是我在切片中闡述的. 使用任何立方體灰色, 獲得了很好的結果(圖片1), 然後切換到黑色anycubic (相同的設定)列印一個簡單的模型基礎. 我嘗試了直立, 45度, 平坦, 全都在支撐上, 但5個失敗的指紋. 要麼支援破碎, 而不是堅持構建板塊, 但主要是在我不得不清空和剝離的fep上形成樹脂(圖片2和3).
我以為是螢幕換成半透明藍色, 完全相同的設定, 可以看到螢幕通過樹脂工作, 然後隨機列印了一個完美的列印(最後一張照片) ♂️ 這黑色怎麼了樹脂?

· 查看原文 · 為此翻譯評分

Darko Miljak
2020-03-20 17:35:30

Revin Leong
2020-03-20 17:43:16

罗西晟
2020-03-20 17:44:11

James Steven Cheeseright
2020-03-20 17:50:18

Lee Rogers
2020-03-20 18:23:28

Lee Rogers
2020-03-20 18:24:05

Lee Rogers
2020-03-20 18:26:10

Lee Rogers
2020-03-20 18:27:06

James Steven Cheeseright
2020-03-20 18:30:07

James Turner
2020-03-20 19:08:07

Lee Rogers
2020-03-20 19:15:31

罗西晟
2020-03-20 19:22:07

James Turner
2020-03-20 19:23:40

罗西晟
2020-03-20 19:27:03

罗西晟
2020-03-20 19:28:46

Richárd Papp
2020-03-20 19:37:25

Richárd Papp
2020-03-20 19:39:30

Richárd Papp
2020-03-20 19:52:10

Fran Ce
2020-03-20 20:24:28

Lee Rogers
2020-03-20 20:28:52

Richárd Papp
2020-03-20 20:36:41

Richárd Papp
2020-03-20 20:37:05

Lee Rogers
2020-03-20 20:38:14

Lee Rogers
2020-03-21 01:00:01

Richárd Papp
2020-03-21 01:01:25

Lee Rogers
2020-03-21 01:08:13

Lee Rogers
2020-03-21 01:08:18

Richárd Papp
2020-03-21 01:28:17

Lee Rogers
2020-03-21 01:32:32

Richárd Papp
2020-03-21 01:33:08

Richárd Papp
2020-03-21 01:33:32

Lee Rogers
2020-03-21 01:36:10

原文網址 John Driggers
2020-03-18 11:47:01

Anyone else doing any exposure testing on the Zero? Cooked this up today, if anyone has the factory Zero stl I'd really appreciate it! 4s start time, Phrozen Rapid Aqua Green

還有誰在零進行曝光測試嗎? 今天煮了這個, 如果誰有工廠零, 我真的很感激! 4 s開始時間, phrozen快速aqua green green

· 查看原文 · 為此翻譯評分

Alejandro Quesada
2020-03-18 12:49:29

So, how do these ones work? The platform Prints every leyer at a time controlling the different exposures without moving the build plate?

John Driggers
2020-03-18 12:55:46

Yes - just like the "old" firmware patch version, except this one is built into the running firmware! You get base + 8 seconds for each of the 8 objects. I had to hack together an STL based on the original photon files which are too large. I didn't want to scale so we could compare printer to printer.

原文網址 Russell Beer
2020-03-13 18:48:30

I know I have seen it somewhere here but cant find it. I am printing a Flat object and angled it about 30 degs and am finding layering lines in the final printed object.

My Settings

0.02, 11 secs exposure, 1 sec off, 80 Secs Bottom, 8 Bottom layers.. Monocure 3d rapid Grey..

Any Thoughts on what the sweet spot angle would be or more tweaks to my settings to drop the layering Lines.

Your replies are most welcome,

Cheers.

翻譯年糕

Doug Bowman
2020-03-13 20:02:22

Russell Beer
2020-03-13 21:30:14

Merv Hinton
2020-03-14 01:35:56

Stuart Walker
2020-03-14 04:54:35

Russell Beer
2020-03-14 09:14:30

Stuart Walker
2020-03-14 10:01:29

原文網址 Jen McVey
2020-03-12 20:25:50

When your BFF goes to Kroger at the buttcrack of dawn. She sees they restocked and knows I’m almost out and freaking out. 9 bottles SCORE!

Mine! All MINE!! ? ? ?

Edit: stop being jerks and assuming you know my business it’s rather rude to say the least especially the one jerk! I don’t just use this for the 5+ prints I make daily and those runs usually have numerous pieces on the plate. My business does and is not just 3D printing. I already was using this all day every day and I can’t recycle it for my other use. So thanks to those assuming I’m a stupid hoarder. You’re an amazing person for tearing others down that you don’t know!

翻譯年糕

Benny Woolley
2020-03-12 20:29:17

Adam Bishop
2020-03-12 20:34:11

Richard Crummy
2020-03-12 20:46:03

Daniel D'Intino
2020-03-12 20:46:43

Nipuna Gunarathne
2020-03-12 20:50:10

Ethan Middleton
2020-03-12 20:51:22

Jen McVey
2020-03-12 20:51:50

Barry Moazami
2020-03-12 20:52:37

Jen McVey
2020-03-12 20:55:51

Richard Crummy
2020-03-12 21:00:26

Jen McVey
2020-03-12 21:00:50

Jen McVey
2020-03-12 21:02:11

Jeff Greenfield
2020-03-12 21:12:05

Blake Moody
2020-03-12 21:13:11

Cody Cody
2020-03-12 21:18:41

Ethan Middleton
2020-03-12 21:19:55

Benny Woolley
2020-03-12 21:29:36

Len Smith
2020-03-12 21:34:06

Karoten Buford
2020-03-12 21:41:48

Miles Redman
2020-03-12 21:46:48

Alicia Tarr
2020-03-12 21:51:27

Jim Nelson
2020-03-12 21:55:25

Richard Crummy
2020-03-12 21:56:03

Jim Nelson
2020-03-12 21:56:39

Richard Crummy
2020-03-12 21:58:19

Jen McVey
2020-03-12 21:59:09

Jen McVey
2020-03-12 22:00:10

Jimmy Freeborn
2020-03-12 22:00:21

Jen McVey
2020-03-12 22:00:37

Jim Nelson
2020-03-12 22:03:01

Jen McVey
2020-03-12 22:04:59

Jim Nelson
2020-03-12 22:05:20

Jeffrey Opel
2020-03-12 22:05:49

Jen McVey
2020-03-12 22:06:47

Joey Smith
2020-03-12 22:10:33

Mike Kelso
2020-03-12 22:15:41

John Driggers
2020-03-12 22:17:53

Bob Snyder
2020-03-12 22:20:59

Alicia Tarr
2020-03-12 22:21:08

Bob Snyder
2020-03-12 22:21:37

Edward Michael Lopez
2020-03-12 22:32:44

John VanRyn
2020-03-12 22:33:48

Mat Marraffa
2020-03-12 22:38:04

Ben Brotherwood
2020-03-12 22:47:20

Richard Crummy
2020-03-12 22:51:54

Bob Snyder
2020-03-12 22:53:46

Richard Crummy
2020-03-12 22:54:41

Mike Florida
2020-03-12 23:04:32

Joe DePinto
2020-03-12 23:11:47

Gregory Thompson
2020-03-12 23:20:02

Erik Herman
2020-03-12 23:41:13

Erik Herman
2020-03-12 23:43:05

Chris Konsult
2020-03-12 23:56:18

Wes Swain
2020-03-12 23:58:09

Chad Elstad
2020-03-12 23:58:54

Rick Graham
2020-03-13 00:04:40

Smith Hayward
2020-03-13 00:10:12

Brian Jones
2020-03-13 00:12:23

Alex Mantle
2020-03-13 00:12:51

Chad Elstad
2020-03-13 00:23:55

Chad Elstad
2020-03-13 00:24:26

Smith Hayward
2020-03-13 00:25:52

Gregory Thompson
2020-03-13 00:32:21

James Smith
2020-03-13 00:45:38

Ben Rawalt
2020-03-13 00:57:26

Mike Green
2020-03-13 01:28:51

Edward Michael Lopez
2020-03-13 01:34:48

Chad Elstad
2020-03-13 01:38:35

Robert Silvers
2020-03-13 01:47:40

Tim Moulton
2020-03-13 02:04:33

Tim Moulton
2020-03-13 02:07:29

Tim Moulton
2020-03-13 02:08:06

Tim Moulton
2020-03-13 02:08:25

Chad Elstad
2020-03-13 02:10:31

Rachel Branson
2020-03-13 02:11:15

Michael Kiaunis
2020-03-13 02:20:01

Steve Prior
2020-03-13 02:31:02

Jim Nelson
2020-03-13 02:36:43

Jim Nelson
2020-03-13 02:40:01

Tim Moulton
2020-03-13 03:22:04

Tim Moulton
2020-03-13 03:22:32

Blake Moody
2020-03-13 03:27:12

Patryk Lach
2020-03-13 03:27:45

原文網址 Harry Richardson
2020-03-12 08:16:09

okay this may be a totally stupid question but the photon zero and the s have same build are so why one over the other?

翻譯年糕

Philip Coulson
2020-03-12 08:23:58

Harry Richardson
2020-03-12 08:24:39

Philip Coulson
2020-03-12 08:25:47

Harry Richardson
2020-03-12 09:34:34

原文網址 Jen McVey
2020-03-11 08:27:20

Ok so I finally got to use my sonic mini today and did 2 prints just fine. Then printed some other stuff to compare to prints from the photon s I have. I love it since it’s so much faster.

However, somehow resin splashed on the case/lid, has 2 small cracks on the case/lid, and the vat is cracked in a few places. I did a quick google search for a metal vat replacement. No luck.

I was seriously ready to return the photon to Amazon I have 5 days left and then I was going to buy another sonic.

Any suggestions to remedy this? I really want this one. But I print constantly and can’t replace plastic vats every day.

EDIT: haha I’m stupid that wasn’t splashed resin it dawned on me last night taking the lid off how the resin got there. I set it upside down and there was a bit of resin on the rim from refilling the vat during a print.
The company stated where the cracks are us due to the screws and their injection molding. Some other explanations about the cracks also which totally makes sense to me. I did order the metal vat from their website it was just over 52.00 with shipping in USD. I’ll make a new post regarding the company here gouging people.

好吧, 所以我今天終於用我的sonic迷你, 做了2個指紋很好. 然後列印了一些其他的東西來比較我擁有的光子s的指紋. 我喜歡它, 因為它這麼快.

然而, 不知何故的樹脂灑在箱子上/蓋子上有2個小裂縫, 增值稅在幾個地方破裂. 我快速谷歌搜尋了金屬增值稅更換. 沒有運氣.

我真的準備好把光子送回亞馬遜, 我還有5天, 然後我打算再買一個音速.

有任何建議來糾正這個問題嗎? 我真的想要這個. 但我不斷列印, 不能每天更換塑料桶.

編輯: 哈哈哈, 我很蠢, 沒有噴樹脂, 昨天晚上, 我就把樹脂是如何到達那裡的. 我把它顛倒了, 在印刷品時重新填充增值稅的樹脂.
該公司指出, 由於螺絲和注射成型, 我們的裂縫在哪裡. 關於裂縫的其他一些解釋, 這對我來說完全有意義. 我確實從他們的網站訂購了金屬增值稅, 剛剛超過52.00美元運費. 我將釋出關於這家公司的新帖子.

· 查看原文 · 為此翻譯評分

Cody Cody
2020-03-11 08:44:15

Jen McVey
2020-03-11 08:45:10

Cody Cody
2020-03-11 08:46:58

Jen McVey
2020-03-11 08:48:16

Cody Cody
2020-03-11 08:50:40

Jen McVey
2020-03-11 08:51:28

Cody Cody
2020-03-11 08:53:09

Wes Mischke
2020-03-11 08:53:58

Jen McVey
2020-03-11 08:57:01

Jen McVey
2020-03-11 09:47:36

Cody Cody
2020-03-11 09:58:34

Jen McVey
2020-03-11 10:06:24

Jen McVey
2020-03-11 10:08:52

John Chrapkowski
2020-03-11 12:42:27

Jen McVey
2020-03-11 12:44:11

Francois Lozach
2020-03-11 14:39:03

Darko Miljak
2020-03-11 16:26:32

Jen McVey
2020-03-11 21:47:38

Jen McVey
2020-03-11 21:49:19

原文網址 Todd Nation
2020-03-10 10:45:12

Hi group,

I've just switched to Monocure rapid resin and feel like I'm getting shallow detail, the pictures below aren't the best, and taken just after IPA bath so a bit shiny, but it seems like it's missing a lot of sharpness on the face, the belt skull etc.

How is this normally fixed, increasing layer exposure? This was with 5s layers. Or is it likely a limitation of the resin? (Printed on Anycubic Photon S).

翻譯年糕

Nathan Carter
2020-03-10 10:51:07

Zac Lindsay
2020-03-10 10:53:51

Benjamin Tolputt
2020-03-10 10:58:13

Scott Pavlich
2020-03-10 11:01:11

Todd Nation
2020-03-10 11:30:13

Jarrett Lee
2020-03-10 11:44:55

Scott Pavlich
2020-03-10 11:49:04

Scott Pavlich
2020-03-10 13:48:44

Scott Pavlich
2020-03-10 14:04:47

Robert Mako Sharkey
2020-03-10 19:25:34

Mark Wardle
2020-03-11 01:03:36

Fabbio Timpano
2020-03-11 11:41:58

Fabbio Timpano
2020-03-11 11:43:26

Daniel Hendlowitch
2020-03-12 00:05:06

原文網址 Peppers Magee
2020-03-10 07:18:03

R_E_R_F - Resin Exposure Range Finder

I did the RERF with a new Photon S and Monocure Rapid Gray. The Normal Exposure Time was default (8). The best exposure seems to be No. 5. None of them are perfect.
To summerise, my printer with this resin requires a normal Exposure setting of: 8+5=13.

Seems a little high? Is this inline with your experience?

I'm getting badly warped models with current setting of 11s. Baseplates pulling away from supports etc.

Cheers

翻譯年糕

Carla Birch
2020-03-10 07:24:16

Peppers Magee
2020-03-10 07:44:17

Carla Birch
2020-03-10 07:50:34

Peppers Magee
2020-03-10 07:52:05

Carla Birch
2020-03-10 07:56:20

Peppers Magee
2020-03-10 07:57:56

Peppers Magee
2020-03-10 07:58:51

Carla Birch
2020-03-10 07:59:31

Carla Birch
2020-03-10 08:02:17

全不選發文排行