Anycubic Photon Printer Owners 造訪社團 » 用戶發文

Good evening guys, I have three questions to ask:
The first concerns the power of our LCD on the photo with a power of 405nM, 420 nM resins are not usable
I suppose I'm wrong?

Is there an update regarding software and LCD?

Have you ever heard of glass resin?
I mean an article that talks about this technology on dlp / sla technology that printed glass.

https://www.nature.com/articles/nature22061

Thank you all for your help

翻譯年糕

How many degrees Celsius can a resin once come in?
Are there heat resistant resins?

翻譯年糕

Good evening, can you explain what the OFF-TIME setting is for, I know it's the waiting time between one level and the other, but how does it affect the finished product?
Thank you so much to anyone who says his

翻譯年糕

What do you think happened?
First of all, in the original file there is not the first layer that forms a film, it should be empty. (so I do not know why it behaves like that)
According to the piece I found it glued on the base, but to be so often, I think it has remained attached to the base for a while 'time and then it is detached.
The printer is calibrated and clean, so the sheet can come out by pulling but you can not push it.
I use isopropyl alcohol and a few drops of Rain off so that the piece is detached from the base during the initial phase. (otherwise it does not come off)
The settings are these:
- Layer thickness: 0.05
-Normal exposure: 12s
-Off time: 6.5s
-Botton exposure TIME: 100s
-Botton layers: 8
The press is in a room with an average of 12 degrees and relative humidity 50%
The resin is anycubic orange, but it is much more liquid than the original and the tips for printing are very similar.
I attach the link:
https://www.ebay.it/…/ANYCUBIC-Orange-Color-3…/264036072638…
Thank you so much for any help

翻譯年糕

Good evening,
first of all thank you for accepting me in the group.
I have a question that particularly concerns me about my Anycubic photon.
first of all I have been there for 2 weeks and I have made the first print (the cube of anycubic photon) perfect print on the first shot.
Regularly cleaned with isopropyl alcohol and calibrated on the zero level with a sheet of paper and rests perfectly.
Now I find myself in a situation where any type of print I make remains attached to the transparent plastic sheet of the base instead of sticking to the steel plate.
I have tried in many ways to various settings but I can not make the first layers attack on the top.
I changed the plastic film at the base once and I stretched it very well without flaws. (maybe even too tight). But the problem always repeats itself. I no longer tried to print the cube of anycubic, but first before making further attempts I decided to write to you and ask for advice to those who are more experienced than me. I also tried to insert the rectangular raft but always paste on the underlying layer.
Unveil the makeup please.
Thank you in all cases and I wish you a good evening

翻譯年糕