• COSPLAY 3D 建模
  • 3D列印服務
  • #maker+t=market
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » 用戶發文

原文網址 Aarón Navarro
2019-09-17 02:51:28

Hi guys, need little help here... I've been making tests with Tiger casteable Resin, I can't buy in my country Bluecast 'cause the import laws, so that option is out. I don't have any trouble with printings with another resin, but the casteable type always fail. I'd even rise the bottom exposure time to 200 secs and I can't (the f word) make the (f word again) resin get sticked to the base, sometimes it does but the printing fails anyway. Apparently looks like a bad supporting, but as you may see in the pics below, that's not the problem. The resin is 405nm so I really don't know what am I doing wrong. Yesterday, I leveled again the base, and the lcd screen works fine. I don't want to sand the base, so far I didn't have the need of doing that, but I'm running low of ideas.... And it's kind of frustrating. I've make the supports thicker as the raft, I,ve also tried to change the position of the model in the base. So... If the light power is ok, the exposure time gets the resin hard but doesn't get attached to the base... the problem should be with the aluminum base and this kind of resin? I don't know why it keeps failing... Thanks in advance!

翻譯年糕

Sebastian Woszczyk
2019-09-17 02:54:51

David Zeth
2019-09-17 03:01:26

Doug Clark
2019-09-17 03:02:41

Aarón Navarro
2019-09-17 03:02:57

Aarón Navarro
2019-09-17 03:03:58

David Zeth
2019-09-17 03:04:34

Matt Dowis
2019-09-17 03:05:03

Aarón Navarro
2019-09-17 03:06:27

David Zeth
2019-09-17 03:07:38

Doug Clark
2019-09-17 03:07:45

Aarón Navarro
2019-09-17 03:09:19

Aarón Navarro
2019-09-17 03:10:13

Aarón Navarro
2019-09-17 03:10:23

Matt Dowis
2019-09-17 03:10:50

Aarón Navarro
2019-09-17 03:11:24

Aarón Navarro
2019-09-17 03:11:47

Aarón Navarro
2019-09-17 03:13:37

Aarón Navarro
2019-09-17 03:15:22

Aarón Navarro
2019-09-17 03:16:08

Aarón Navarro
2019-09-17 03:18:32

Aarón Navarro
2019-09-17 03:21:56

Aarón Navarro
2019-09-17 03:23:29

Doug Clark
2019-09-17 03:23:52

Aarón Navarro
2019-09-17 03:27:09

Doug Clark
2019-09-17 03:36:59

Leon Photon
2019-09-17 04:31:11


原文網址 Aarón Navarro
2019-09-14 13:23:40

Is this the beginning of the end???... I turned off the Photon and it worked fine again... I'm scared... :/ * The inner fan just stopped working*, 4 months of use...

翻譯年糕

Israel HV
2019-09-14 14:29:05

Kevin Boogaard
2019-09-15 04:58:56

Aarón Navarro
2019-09-15 05:01:31

Kevin Boogaard
2019-09-15 05:02:22

Aarón Navarro
2019-09-15 05:03:19

Kevin Boogaard
2019-09-15 05:05:46

Aarón Navarro
2019-09-15 05:11:15


原文網址 Aarón Navarro
2019-09-14 04:22:50

Does anyone knows if the Photon-S while is rated power is 10W more that the original Photon, is more capable to use a larger types of resin?? I've having issues in casteable resins and I'm guessing that should help but not so sure... Thanks in advance!

翻譯年糕

Marco Dieckhoff
2019-09-14 04:43:34

Aarón Navarro
2019-09-14 05:08:04


原文網址 Aarón Navarro
2019-09-03 00:16:14

Hello everybody, Can someone post me the inclination table for the each Z layer size?? Thanks in advance!

翻譯年糕

Scott Schenkeir
2019-09-03 00:23:34

Aarón Navarro
2019-09-03 00:25:26


原文網址 Aarón Navarro
2019-08-29 01:09:20

Hi guys, does anybody has this problem? I'm losing printing RES , I've just noticed that my LCD has like fingerprints inside of it and I don't know if this is the problem. I'm using Anycubic gray and green, this is green and my exposure times and so, are as I'm showing pics below. I'd tryed to open del lcd but its kinda glued or something, I don't have a hot blow gun. Normaly I print this kind of rings at 90° but in my experience it does't seem to be an inclination issue. Any thoughts?? :/

翻譯年糕

Nathan Kopp
2019-08-29 05:09:54


原文網址 Aarón Navarro
2019-08-21 12:47:39

Does anybody know what side is the front view of the printer? That triangle at one side of the vat where's supposed to be at the printer, left or right?? Maybe is a silly question but I can't remember the position of my past printings ? Thanks a lot! :D

翻譯年糕

Scott Pavlich
2019-08-21 12:53:56

Aarón Navarro
2019-08-21 12:54:42

Lorenzo JB Saponetta
2019-08-21 13:26:50

Aarón Navarro
2019-08-21 13:28:39

Aarón Navarro
2019-08-22 09:40:48

Aarón Navarro
2019-08-22 09:40:50

Lorenzo JB Saponetta
2019-08-22 09:46:18

Aarón Navarro
2019-08-22 09:55:27

Aarón Navarro
2019-08-22 09:57:10

Lorenzo JB Saponetta
2019-08-22 09:58:51

Aarón Navarro
2019-08-22 09:59:08

Lorenzo JB Saponetta
2019-08-22 09:59:40

Lorenzo JB Saponetta
2019-08-22 10:00:15

Lorenzo JB Saponetta
2019-08-22 10:01:21

Aarón Navarro
2019-08-22 10:02:21


原文網址 Aarón Navarro
2019-08-02 04:33:13

Tiny pineapple.

翻譯年糕

Chris Visser
2019-08-02 04:36:17

Stephen Colin Richie
2019-08-02 04:38:26

Aaron Marino-Drake
2019-08-02 04:39:00

Sam Ellis
2019-08-02 08:03:59

Hoang Gy
2019-08-02 08:38:48

Hoang Gy
2019-08-02 08:39:53

Luke Mason
2019-08-02 14:48:01

Noorhisham Noordin
2019-08-02 17:44:44

William Preston Welch
2019-08-03 00:51:41

Hoang Gy
2019-08-03 07:25:34

Angelus Nox
2019-08-05 03:50:20


原文網址 Aarón Navarro
2019-06-29 06:04:39

I've been working with my photon since a couple of months ago and I've noticed my prints are 5 - 7 % thicker than my CAD models. The layers in the printed model are fine and invisible and there aren't any problems at all with the printing process, so I can discard the leveling. But all my models are like fat. The FEP is in good state and thight. I've been using anycubic gray at 8 bottom layers, 95-110 of base exposure, 3 to 1 seconds of light off, 11 - 14 seconds of normal exposure and .03mm of layer.... I have these parameters from thingiverse. Does anybody has the same problem? I print jewelry models so that increase is a problem. I'm modeling thinner pieces to compensate the offset but I think there's something I'm doing wrong with my printing specs. Thanks in advance!

翻譯年糕

Sven Zethof
2019-06-29 06:06:53

Nick Neal
2019-06-29 06:06:54

Aarón Navarro
2019-06-29 06:08:17

Aarón Navarro
2019-06-29 06:11:48

Nick Neal
2019-06-29 06:12:43

Eder Junior Barrientos Trujillo
2019-06-29 06:14:48

Aarón Navarro
2019-06-29 06:16:20

Aarón Navarro
2019-06-29 06:17:25

Eder Junior Barrientos Trujillo
2019-06-29 06:18:36

Eder Junior Barrientos Trujillo
2019-06-29 06:20:02

Aarón Navarro
2019-06-29 06:20:59

Eder Junior Barrientos Trujillo
2019-06-29 06:21:20

Eder Junior Barrientos Trujillo
2019-06-29 06:21:33

Eder Junior Barrientos Trujillo
2019-06-29 06:22:20

Aarón Navarro
2019-06-29 06:22:56

Eder Junior Barrientos Trujillo
2019-06-29 06:23:47

Chad Elstad
2019-06-29 07:02:59

Abdul Hanan Ismail
2019-06-29 08:47:08


原文網址 Aarón Navarro
2019-06-13 14:32:03

Flat position vs tilted one. Tiny letters achieved ?
Same print, no anti-aliasing.
.03mm
BTC 8
ET 11
BET 95
OFF 3

翻譯年糕


原文網址 Aarón Navarro
2019-06-07 15:19:17

Has anyone tried this settings with anycubic gray at 70 microns?? Normaly I print at 11 secs in the exposure time at 30 microns, so I raised to 18secs. Don't sure is enough though....

翻譯年糕

Bob Deblier
2019-06-07 16:59:48

Aarón Navarro
2019-06-07 21:23:49


 

討論主題

全不選 常用關鍵字