Anycubic Photon Printer Owners 造訪社團 » 用戶發文

原文網址 Tauri Icenogle
2019-07-12 12:23:48

Ok, finally got something other than the test cube to print. What causes it to lift off the base like this so I can fix it? I’m so close to getting this thing to print right.

EDIT to add: this was printed at .05, 10s exp time, 70s bottom layer exp, 8 bottom layers.

翻譯年糕

Brad Morris
2019-07-12 12:25:55

Chad Elstad
2019-07-12 12:31:12

Nick Williams
2019-07-12 12:37:26

Nick Williams
2019-07-12 12:38:12

Scott Pavlich
2019-07-12 12:51:14

Greg Chapman
2019-07-12 15:46:09

Lucas Miguel
2019-07-12 15:51:18

Stephen Carr
2019-07-13 00:09:33

原文網址 Tauri Icenogle
2019-07-11 09:16:05

Is it possible for a room to be too cool to print in? 65% of my stuff fails and I’ve tried so many different things. I’ve replaced the FEP, re z’d it with the flint Reid method after the paper one wasn’t working, I switched to elegoo grey, added way more/ thicker supports than probably necessary, oriented my models at 45 degrees, shaken my resin, let it sit, heated the resin with a hair dryer to get out any extra bubbles and still..... nothing sticks to the build plate. It’s 75 degrees F in my house so I’m wondering if that’s affecting things. I’m worried it will be too hot if I move the printer to the garage. I’m in Arizona so it’s like 110 during the day outside right now. Seems like a bad idea. What else could I be missing?

翻譯年糕

Michael J Morris
2019-07-11 09:18:35

Tauri Icenogle
2019-07-11 09:26:13

Eric Wilfreesboro
2019-07-11 09:32:03

James Turner
2019-07-11 09:37:01

Robert Silvers
2019-07-11 09:41:25

Robert Maefs
2019-07-11 09:42:05

Robert Maefs
2019-07-11 09:42:46

Sam Ellis
2019-07-11 09:51:48

Stefan Giudici
2019-07-11 09:54:52

Stephen Carr
2019-07-11 10:09:41

Susan Sioux Mercer
2019-07-11 10:23:35

Robert Maefs
2019-07-11 10:24:53

Susan Sioux Mercer
2019-07-11 10:41:10

Greg Chapman
2019-07-11 10:42:44

Tauri Icenogle
2019-07-11 10:44:38

Greg Chapman
2019-07-11 10:46:07

Tauri Icenogle
2019-07-11 10:48:29

Tauri Icenogle
2019-07-11 10:48:46

Susan Sioux Mercer
2019-07-11 10:53:33

Greg Chapman
2019-07-11 11:10:21

Scott Pavlich
2019-07-11 11:24:50

Susan Sioux Mercer
2019-07-11 11:29:22

Scott Pavlich
2019-07-11 11:33:03

Chad Elstad
2019-07-11 12:12:42

Chad Elstad
2019-07-11 12:14:26

Susan Sioux Mercer
2019-07-11 12:25:20

Robert Maefs
2019-07-11 12:27:42

Bob Deblier
2019-07-11 13:06:51

Ivan Antharon Antalec
2019-07-11 14:27:26

Robert Maefs
2019-07-11 19:21:17

Robert Maefs
2019-07-11 19:23:34

Tom Smith
2019-07-12 00:19:07

原文網址 Tauri Icenogle
2019-07-07 13:42:37

This machine is giving me fits. Any idea why the inner lid is fogging up like this? It was closed all day, indoors at about 75 degrees F not running, just chilling out. I think my FEP was damaged during my very first print, the test cube. I cleaned it all out, had three successful prints, then another failure and this foggy mess so I replaced the FEP and re did the level and z. Failed the first print after. Only the supports printed. Also, the only thumb drive this dude will read is the original that came with it. I bought several new ones and reformatted the latest one, a 16 Gb, with FAT32, but it will only read the cheap crappy one. All the others give an error message. This is a little frustrating. I will fix it if I can but what the heck? Why is it fogging up. The plexi glass is even cracked around a couple of screws. I haven’t even touched those. I’ve been at work, 12 hour shifts the last three days.

翻譯年糕

Chris Smith
2019-07-07 14:12:14

John Lowry
2019-07-07 15:05:28

Tauri Icenogle
2019-07-07 22:09:51

Tauri Icenogle
2019-07-07 22:10:38

John Cook
2019-07-08 06:31:23

Tauri Icenogle
2019-07-08 06:38:06

Tauri Icenogle
2019-07-08 06:38:59

Tauri Icenogle
2019-07-08 06:39:37

Tauri Icenogle
2019-07-08 06:40:56

Tauri Icenogle
2019-07-08 06:43:03

Patrick Smith
2019-07-08 20:52:21

原文網址 Tauri Icenogle
2019-07-06 11:07:37

Is it normal to have some lumps of thicker resin in the vat after a print? My very first print was a failure so I had cured resin stuck to the fep but I completely cleaned out the resin and started over. Two good prints later, they’ve both had lumps of thick resin in the vat after. No idea if it’s supposed to do that or if I have a problem. Working on print 3 now.

翻譯年糕

Dustin Wiebe
2019-07-06 11:09:32

Stephen Carr
2019-07-06 11:21:27

Robert Silvers
2019-07-06 15:26:44

Danny Lloyd
2019-07-06 17:11:38

Tauri Icenogle
2019-07-06 19:45:34

Tauri Icenogle
2019-07-06 19:46:11

原文網址 Tauri Icenogle
2019-07-03 12:51:55

Annoying newbie question, I apologize. I got my printer Sunday but haven’t even been able to print the test print because the software doesn’t like any of my computers. I’ve googled it to death and I can surmise it has something to do with my video card. I’m. Not an IT guy. I have no idea what the problem is. I’m attaching a photo that has happened on three different computers. None will let me see the actual model. I’m hoping it’s something small and I will feel like a dork for asking afterwards but I’m at my wits end. Please help me slice this file so I can actually use my printer.

翻譯年糕