可以考慮進化一下小7了！用Raspberry Pi進行，小弟這幾天會先確認一下，是否可以正常的連線之類的，重點是還可以用webcam看有沒有列印正常，後續會再回報給大家
王文彬
2015-07-27 12:25:26
要是能整合自動更換列印平台的架構用...不知可以作到遠端遙控列印這功能沒！！
Ching-Feng Lin
2015-07-27 20:10:41
測試成功，可以進化了，不過鏡頭還可以再找找合適的位置
Ching-Feng Lin
2015-07-27 20:10:50
Ching-Feng Lin
2015-07-27 20:11:02
Che Hung Wang
2015-07-27 20:12:15
陳志瑋
2015-07-27 20:16:33
Ching-Feng Lin
2015-07-27 20:17:35
彭士瑋
2015-07-27 20:22:57
Kevin Lan
2015-07-27 20:34:52
啊~~我懂了, 用Raspberry Pi來取代電腦直接透過USB控制小七.
Ching-Feng Lin
2015-07-27 20:39:59
是的，其實他可以支援windows但是耗電量差很多，手上剛好有樹莓派就用了
Ching-Feng Lin
2015-07-27 20:50:31
接下來會試著，整合繼電器、LED燈座、等等，讓小七進化的更強大！
Ally Yao
2015-07-27 21:13:39
Andriy Chortya
2015-07-29 22:00:04
My raspbery Pi 2 is on it's way
:)
I wanted to test OctoPrint for a long time.
Ching-Feng Lin
2015-07-29 22:01:16
Do you have try to install cura GUI in it?
Andriy Chortya
2015-07-29 22:22:53
I don't have it yet. But Cura GUI is not needed as you can upload the STL files using webinterface. You can use different slicers with OctoPrint including Cura.
汪建廷
2015-08-11 07:01:00
汪建廷
2015-08-11 07:09:25
目前用COMMAND 的方式M220S200(速度200%)
彭士瑋
2015-08-11 07:25:44
