Taiwan自動控制設備交流 造訪社團 » PLA

說明書看不懂
想詢問各位前輩

以下是伺服壓床的說明書其中一段
是講CCLINK與PLC連線時
如何透過PC寫入暫存區內
有前輩可以大概說一下是什麼意思嗎?
主要是卡在TOP+?這邊
是指說我原有的暫存區位置+?的意思
或是有其他的意思呢?

I/O memory assignments are not made by specifying individual registers for the 14 words, but by assigning the top register numbers for input and output, from which the successive registers are then assigned in order. For example, the following registers are used for the Fieldbus domain if input and output is assigned with the top register 110 and 190, respectively:
•
Input 110, 111, 112, 113, 114, 115, 116, 117, 118, 119 (10 words)
•
Output 190, 191, 192, 193 (4 words)
In explanations hereafter, the individual numbers (register address) are referred to as the following:
Input top +0, input top +1, input top +2, ..., input top +9
Output top +0, output top +1, output top +2, output top +3
The “input top +1” command register specifies the type of operation. However, check whether or not it is possible to execute the command before doing so. The command can be executed if the lowest bit of status register 1 for “output top+0” is 1.
After setting the command code and required parameter (value), set the lowest bit from 0 to 1 for the “input top +0” control register to execute the command. The lowest bit needs to be retained as 1 for at least 10 msec.
If the command is executed, the lowest bit for the “output top +0” status register 1 becomes “0: busy” (*2) and after the command is processed, it reverts to “1: execution possible.” If some sort of execution error occurs, the bit 1 for the status register (output top +0) becomes “1” (error occurred). Read the error code for status register 2 (output top +1) and attend to the error.
The following pages show a flowchart and timing chart for the program creation registers.

翻譯年糕

世界第一外商設備商召募Electrical Design Engineer,

歡迎有cnc工具機,自動化設備, 機械手臂,半導體設備,硬體電路設計,電路系統整合經驗的朋友與我聯繫 kobe.yang@talentplusco.com

Job Description
The Electrical Design Engineer is responsible for the specification, design, realization and qualification of the electrical infrastructure and electrical (sub) modules.
The electrical infrastructure consists of the complete electrical path from sensor/actuator towards I/O and/or computational racks, meaning:
 All cabling from sensors/actuators up to I/O and/or computational racks(cable overview and detailed wiring diagrams)
 Connection plates/boxes
 Computational, Motion Control and Power Electronics racks
 I/O racks (rear panels and/or backplanes)

Experience
 At least 3-5 year experience in electrical system integration.
 Has the experience for using ACAD, E-plan or other software to proceed the equipment electrical system design
 Has knowledge of electrical connection methods, AC and DC power distribution and signal transmission(DI/DO, remote IO, AD/DA).
 Has knowledge on EMC and electrical safety (International (IEC) standards, US standards (NFPA, UL))
 Has knowledge on integration of all kind of sensors into system( Pressure, vacuum, positioning sensors)
 Has technical knowledge of cabling concepts, connectivity concepts, EMC, safety.

翻譯年糕

各位大大工商服務時間打一下廣告
小弟提供的報價服務如下:
1.PLC程式開發(三菱.西門子)
2.HMI 開發(三菱.Proface.西門子)
3.Eplan8 Symbol,Macro客製化設計
4.六軸手臂程式開發(Fanuc) https://www.youtube.com/watch?v=AcmjasTNHbA&t=31s
5.產線自動化整合(垂直與水平連鎖/CClink. Profibus. Profinet)
如有需求請留言謝謝!

世界設備大廠 Hiring 硬體工程師 薪資福利優渥 Locate:林口 有興趣者請與我聯繫或將履歷寄至 kobe.yang@talentplusco.com
from system equipment/ electrical industry equipment or even from traditional tooling machine industry who has whole system electrical integration experience could be the GOOD candidates. (系統電路整合)

Job Description:
The Electrical Design Engineer is responsible for the specification, design, realization and qualification of the electrical infrastructure and electrical (sub) modules.
The electrical infrastructure consists of the complete electrical path from sensor/actuator towards I/O and/or computational racks, meaning:
• All cabling from sensors/actuators up to I/O and/or computational racks(cable overview and detailed wiring diagrams)
• Connection plates/boxes
• Computational, Motion Control and Power Electronics racks
• I/O racks (rear panels and/or backplanes)

Experience
At least 3-5 year experience in electrical system integration.
Has the experience for using ACAD, E-plan or other software to proceed the equipment electrical system design
Has knowledge of electrical connection methods, AC and DC power distribution and signal transmission(DI/DO, remote IO, AD/DA).
Has knowledge on EMC and electrical safety (International (IEC) standards, US standards (NFPA, UL))
Has knowledge on integration of all kind of sensors into system( Pressure, vacuum, positioning sensors)
Has technical knowledge of cabling concepts, connectivity concepts, EMC, safety.

翻譯年糕

各位先進您好，需要進一步了解EPLAN如何使用及相關介紹的影片，請訂閱以下頻道，或是上網搜尋"EPLAN Taiwam" 其他關於課程資訊、活動、手冊、載點、支援，請至Line@ 活動號: https://line.me/R/ti/p/%40nwm6273z
或在網頁上搜尋 EPLAN Taiwan Line 活動號 ?

EPLAN 電氣設計工程大賽，台灣也同步舉辦!
請搜尋" EPLAN大賽" "EPLAN Taiwan"

【應用分享】電弧焊接/電焊應用 (Arc Welding)

今天 # Robotmaster 要與大家分享，我們與加拿大客戶 # GroupeGravel 合作 # 電弧焊接 的應用案例。

*客戶背景: #GroupeGravel (加拿大，魁北克) 經營機械金屬加工共有40年之久，而在2013年因為業務的成長及訴求給客戶更好的服務及供貨品質，而考慮自動化生產。但由於 ##GroupeGravel 完全沒有自動化生產的經驗，也讓 #Robotmaster 有了與他們合作的契機。

2) 機器手臂系統製造單元: # Fanuc (發那科) M-710ic/20L (手臂可達10英尺長)，適合焊接大型物件，及整合 ESAB SP-150 PLASMARC 電漿切割以及Lincoln Electric Power Wave 455M弧焊功能。

*了解 #Robotmaster 如何在5個工作天與客戶達到任務需求:
http://www.roboticstomorrow.com/…/robotmaster-reduces-…/9279

*歡迎加入 #Robotmaster Line 好友
https://line.me/R/ti/p/%40robotmastertw

# Robotmaster台灣 # robotmasterasia
# 離線編程 # 不再需要手動式教導

榮幸邀請貴司參加美商艾羅德克公司台灣分公司 (Aerotech Taiwan) 「SEMICON Taiwan 2016國際半導體展」攤位，展出全新精密運動控制與超精密定位平台產品。

攤位號碼：#2035
展出時間：2016年9月7日(星期三) ~ 9月9日(星期五)
展出地點：台北世貿南港展覽館

展出內容：
1. Aerotech ABL空氣軸承定位平台
2. Aerotech ANT系列長行程線性馬達奈米定位平台
3. Aerotech QNP 系列壓電奈米定位平台
4. Aerotech PlanarDLA 系列開孔式線性馬達XY平台

[案例分享]

雷射加工精密次系統：本套系統被應用於精密雷射加工製程開發，包含三軸線性位移平台，與一套高精度的AGV雷射掃描振鏡。線性馬達PlanarDLXY位移平台與Z軸平台經過精密調整與校正，達到微米等級加工的性能。

官方粉絲團： www.facebook.com/aerotechtw

Yottacontrol A-52 系列WiFi控制器 & A-3288 WiFi遙控器於Andon安登系統及無線訊號燈塔的應用

本影片示範了如何使用Yottacontrol A-52系列WiFi控制器及A-3288 WiFi遙控器及智慧型手機於Andon安登系統及無線訊號燈塔的應用
https://youtu.be/E4f2SyigCnk

型錄:
http://www.yottacontrol.com/download/52X_DM_C.pdf

YottaEditor 程序編程軟件:
http://www.yottacontrol.com/download/ye2.rar

Smart phone APP (Android)
https://play.google.com/store/apps/details…

http://www.yottacontrol.com/
bert@yottacontrol.com