管理員
統計數據
原文網址 彭帟絃 2018-12-03 13:56:44
徵求ATOM 2.5 FX ，請私訊報價，感謝。
Rice Liu 2018-12-03 15:48:33
我私訊你！ ?
原文網址 Fabio Hasseck 2018-12-02 02:29:46
Any way to improve it? My own designed model, Printed on Atom 2.5 EX using cura version 15.04.6, all layers including the first are 0.2 m"m height, walls and bottom/top are 0.8 m"m, speed: 30 first later, 60 for the rest. 230 degrees nozzle on 50 degrees bed and fan at 75%, 20% infill. The stars don't show well and a lot of stringing at the top. bottom part of the cup (after the handle) don't look as well as the handle itself and the top of the cup.
Also when trying to print with dual color the second filament keep snapping or grinding too much and i'm forced to abort it. Other dual color models don't do that..
Taylor Yang 2018-12-02 02:54:17
How about printing it upside down
Hugo Lopez Uria 2018-12-02 03:40:31
Make It in two parts and print the upper part upside down. The two parts can fit later
原文網址 林似諭 2018-11-24 23:54:10
“拼圖“，一個對我極大影響力的作品，因為同事的一句“你都畫出來了，我就要想辦法做出來“，在將近十二年前，用autocad繪製成3d實體，7年前用光固化（polyjet）印製成實體，然後同事想盡辦法幫我開模實作出來，一直到近幾年開始接觸FDM，本以為這樣的模型應該印不出來或組不起來，其間也真的有試印，但都苦於公差及表面粗度而作罷，這次因為有了測試atom 3 lite的機會，抱著不一定選上的心態投搞，索性丟了這個作品來試試，在新機器還沒來時，其實就先用atom2.5ex下去跑了，調整了幾次後就開始瘋狂的列印，在歷經將近50小時的時間，終於把它生出來了，考驗著機器及耐心，真是開心，都忍不住開瓶18來喝了………歪樓了，其實如果以中立的講法，2.5ex我花了許多心心力在上面，才把它調到我認為最好的態度（版上還有許多比我強大的人，請容小弟在這獻醜了），atom 3 lite目前給我的感覺就是即開即上手，也不用花太多時間跟它耗，就能印制很好的成品，也再一次感受到那份用心也感謝原廠提供這個機會讓我測試，或許這個作品稱不上有多高難度，但還是跟大家分享一下，其實我覺得機器的差異其實不大，因為要能印製出成功的作品，除了機器的調校、協調性外，我覺得還是取決於人，因為繪製、切片軟體參數的設計，其影響遠大於機器…至少這是我將近三年來研究的心得………還請各位包涵，多多見諒……
廖新弘 2018-11-25 00:02:00
己經很利害了
林似諭 2018-11-25 00:05:49
其實這顆是2.5EX印的，LITE還有1/3沒印.....不過因為2.5EX的組裝我已盡力了，所以這顆球有比較鬆一點，接下就看LITE在簡易調平的情怳下，能不能更好囉！
施百鴻 2018-11-25 00:21:43
強！
黃震桀 2018-11-27 09:15:07
這鬼東西是用啥材料
呂政瑋 2018-11-27 19:18:04
我有一顆塑膠射出的 這東西用印的真的不容易
原文網址 林似諭 2018-11-24 14:39:53
讓家裡的atom2.5ex動起來，公差有點大，用點力會散…再調整一下應該也是不錯的，曲面度表現也不錯，可惜明燿的料起始點比較會顯現出來，一片一片印真累人…
呂政原 2018-11-24 14:41:28
公差要自己畫圖時就縮小嗎？
陳曉澔 2018-11-24 17:22:36
好漂亮
Efun Lai 2018-11-24 17:33:47
覺得美
陳智彥 2018-11-24 18:02:53
Tsai Porridge 2018-11-24 22:06:42
最後一片覺得壓力大。
王力可 2018-11-24 22:40:54
這顆拼圖球～膜拜12年了⋯⋯
原文網址 陳書凡 2018-11-19 16:31:14
想請問哪裡可以抓得到Cura 3 ATOM 2.5 EX的起始G code 我不小心改到 但不知道怎麼弄回來
梁琄 2018-11-19 18:18:00
重新裝一次呢？
原文網址 李世偉 2018-11-14 16:37:28
大家好，我之前組了一台ATOM 2.5EX 雙噴頭 但是一直校正不好，我想要徵一位有經驗的朋友幫我進行校正，以及順便順便教我一下雙色列印的方法。感謝。至於費用的部分，因為我沒有經驗所以不知道怎麼開。但是只要不要太誇張歡迎私信給我，感謝大家的幫忙。 如果有違反板規麻煩板主跟我說一下我再刪文謝謝。我家住台北內湖
Jason Chiang 2018-11-14 17:10:07
加油!!!
陳維德 2018-11-14 17:11:48
可惜黃大丙不在群裡了,不然內湖應該很近
林千盛 2018-11-14 18:02:40
劉武鑫
吳水豚 2018-11-14 18:23:54
前一段時間才賣了一台ex掉
Stanley Chen 2018-11-14 19:12:20
李世偉 你機器可以送回原廠調整唷:) 應該會酌收一些工本費用 (請來信info@atom3dp.com) …… 查看更多
陳永慶 2018-11-15 08:19:34
你是校正跑不完嗎？ 我今天有遇到，後來發現是因為自動配平不正確造成的 1. 先確認噴頭的開關螺絲間隙可以在各個位置被正確觸發 …… 查看更多
阿童 2018-11-15 08:43:44
快來ATOM公司，找工程師泡茶...
原文網址 John Wachowski 2018-11-03 17:44:08
I'm using the Simplify3D profile with the Atom 2.5 EX, and it's pretty solidly dialed in, at the beginning of every print it does the nozzle flush and logo. Is there a way to disable this with a ticker or something? I can't see it in the release notes.
原文網址 曹锐樑 2018-10-31 11:23:31
I have an atom 2.5 ex 3d printer and started printing dual filaments. I'm having a problem that it keeps clogging up everytime midprint. Do you know why that is? Below is a picture of what the filament looks like at the hot end when I've taken it out. Its does this all the time. Any help would be much appreciated, thanks
曹锐樑 2018-10-31 11:27:45
I have used simplify 3d settings as previously linked here: https://drive.google.com/....../1hV......
John Wachowski 2018-10-31 11:48:19
What filaments are you using? Is it just two different color PLAs?
阿童 2018-10-31 14:40:10
Check you PTFE tube length？ Try follow the step: https://atom3dp.squarespace.com/extruder-issue-en#yjunction
廖新弘 2018-10-31 14:44:11
你的管子沒有突出結合器，所以回抽時軟化PLA就卡住在噴頭固定螺絲與結合器之間
Fabio Hasseck 2018-10-31 16:34:18
What filaments, what temperature and printing speed? Also what slicer are you using?
曹锐樑 2018-11-01 02:18:07
Yes just 2 different colour PLA at 200C
曹锐樑 2018-11-01 02:21:33
Both PLA, 200deg C, print speed is 40mm/s and slicer is simplify 3D, I've been trying to use the latest cura but havent got the settings to work nicely
John Wachowski 2018-11-01 02:24:12
Feeding fresh filament, do both sides of your junction insert and retract without issue? Do this manually. It should slide in and out without binding or obstruction.
Birk Binnard 2018-11-01 03:00:44
You identified the problem yourself when you said "It does this every time." That is exactly what I encountered. From what I can tell the jams result from the fact that melted filament has a viscosity that always leaves a fine trail of filament behind when it is retracted. Over time this builds up and clogs the nozzle. The only way I could reliably fix this was to completely disassemble the nozzle and burn out the clog with a propane torch. I think the only way to reliable do multi-filament printing is with one nozzle for each filament. There was a guy named Jensen Huang working on this - but he seems to have disappeared. Here is his FB page: https://www.facebook.com/groups/150457119076159/
Fabio Hasseck 2018-11-01 03:22:12
Did you set Simplify to pull up to 120 m"m when switching filaments? also what is the retract speed?
曹锐樑 2018-11-01 05:33:57
120mm @ 40mm/s
曹锐樑 2018-11-01 05:36:18
I've got it as smooth as I can, I've pushed the PTFE tubes from the hot end and from the feed together and now going to try it now
曹锐樑 2018-11-01 06:08:20
I have checked the PTFE tube length and it is 35.5mm as per spec. We were given PTFE lube when we got our printer, when did we need to use that?
John Wachowski 2018-11-01 06:27:36
You are seeing the stringing. So there could be an issue with that too.
曹锐樑 2018-11-01 06:37:22
does that mean i should try print at a lower temp? have you got yours to work with dual printing? Im trying to print the tree frog
John Wachowski 2018-11-01 07:13:01
I haven't messed with it, but maybe 190C might get you where you need to be. Or a longer retraction distance/speed might snap it free.
原文網址 Hawke ChienSheng Liu 2018-10-12 13:22:53
蘋果橘子工房房主的小慶祝，ATOM 2.5FX 買空(機)送C(are)，團結力量大，房主帶著您組合、試機、使用指導，帶著機器回家也帶著原廠的關懷 (ATOMCare)。 11/12 前，想要嗎？ # 蘋果橘子工房
原文網址 Per Andersen 2018-10-03 05:19:42
Hallo in groupe i Can see there is a sale og atom 2.5 what is the difrent betvien cpc railes and the thk ? Ons Hallo in groupe i Can see there is a sale og atom 2.5 what is the difrent betvien cpc railes and the thk ? Ons 翻譯年糕
Per Andersen 2018-10-04 06:12:41
Not mutch help here
阿童 2018-10-04 10:22:49
Sorry so late to reply. Just CPC is Taiwan company, the other is Japan. But the print quality are both fine.
Per Andersen 2018-10-04 15:31:45
Thanks
全不選 發文排行
