Anycubic Photon Printer Owners 造訪社團 » resin

Looking for a resin recommendation.

Everything I print will be painted so resin color does not matter. My highest priorities in a resin would be resolution of print and the speed to print. What resin color would offer the fastest print time at high resolutions, I would probably stay with Anycubic brand unless there is something better.

翻譯年糕

Hi.

I've got question. I used to run Photon and decided to "upgrade" to Zortrax Inkspire some time ago. but I've got quality issues. I use original and 3rd party resins.

I've been searching they FB group and tried with customer support, but they keep saying it's either no problem or area temperature difference causing these issues...

I have funny sagging/ deformations at support-part contact point. Does anyone know what could be a reason?

I started pre-warming resin and keep 22-24C around printer, resin's well stirred (no bubbles), slowed lifting speed, increased exposure and exp time-off, new fep, tried hollowed or full body (no difference), thickened supports too (2mm pillar and 1mm tip) Printer's in stable position and all leveled.

I think it could be either mechanical issue or something is wrong with LEDs, but it's only guessing.

I understand it's different printer, but maybe someone came across similar issue and could help me to resolve it.

Thank you very much for your help.

嗨.

我有個問題. 我曾經運行photon, 不久前決定"升級" zortrax inkspire. 但我有質量問題. 我使用原創和第三方樹脂.

我一直在搜尋他們的fb組, 並在客戶支援下嘗試, 但他們一直說, 要麼沒有問題, 要麼地區溫度差異導致這些問題...

我在支援部分接觸點有滑稽的低調/變形. 有人知道甚麼可能是原因嗎?

我開始預熱樹脂, 在印表機周圍保持22-24 c, 樹脂的井噴(無泡沫), 減慢, 增加曝光和exp, 嘗試空洞或全身(無差別), 厚 也支援(2毫米柱和1毫米提示)印表機處於穩定的位置, 全部平穩.

我認為這可能是機械問題, 或者led有問題, 但它只是猜測.

我理解這是不同的印表機, 但也許有人遇到了類似的問題, 可以幫我解決它.

非常感謝您的幫助.

· 查看原文 · 為此翻譯評分

Only now I noticed that cured and uncured resin has different color under UV light (it's same resin). Darker one is fresh after printing and IPA wash (already dry). Birighter is from yesterday and couple of hours under light

翻譯年糕

There is a lot of awesome stuff going on in this page! I love seeing it. I do have a problem of course. I just got my Photon and have tried 3 times to print. It failed all three times. I have leveled it and re-leveled it after watching many videos. My prints stick to the film and not the build plate. It seams to me it's the first layer, but I am new at this. I use the grey resin, i didn't change any settings in my slicer. I downloaded the slicer from anycubic. any suggestions would be appreciated.

翻譯年糕

Дамян Методиев sorry for users messing about. this video should help you with preparing a model for printing with the photon. the software is free. ie meshmixer 3d builder etc. supports show how to do supports with all resin printers etc, hope this helps. https://youtu.be/R7mFeK47pAI 翻譯年糕

Starting to have some success! Long exposure base layers seems to be the trick. 10 at 90s with Elegoo white resin.

File is Deluxe Phoenix from Rocket Pig Games on Myminifactory. Printed with no supports!

翻譯年糕

Considering selling my Anycubic Photon for 200--any interest? I'll include what resin I have with it, some gloves, etc. Just don't have the time to print anymore--and getting ready for a machine shop/garage build--so I'll be tied up for 3 years probably--at which point I'll look at getting back in.

Nothing wrong with it, prints great. Probably only ran it 72 hours or so.

翻譯年糕

Ok, first...thanks for all the recent help. I really appreciate it. I've got the test cube printing, but printing something else still doesn't adhere to the build plate (I just get a lump of resin on the tray).

I understand that this is the slicing settings. What I'm hoping is that there's a way to ...deslice(?) the test cube .photon file, so I can compare the settings for what works vs. what doesn't. (I need to wrap my brain around what each setting means, and having a working example will be helpful)

翻譯年糕

anycubic grey resin , 0.025 layer height, hand painted

翻譯年糕

The feeling when your resin arrived today, but The printer is stuck in another country... Come here noooow

翻譯年糕