• #maker+t=market
  • 3D列印服務
  • COSPLAY 3D 建模
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » 用戶發文

原文網址 Keith Yinger
2020-03-23 03:20:01

So I've spent about an half an hour searching around and it seems the general consensus is as long as you clear coat things they are generally safe for casual wear. So if I put a nice clear coat on these would they be safe to wear as necklaces? I made this last night in Fusion 360 and printed it, all my friends thought it was hilarious and wanted one of their own. Just a little something to commemorate surviving the great "Toilet Paper Crisis of 2020" without having to resort to hoarding. From my experience by the time these things are cleaned and set out in the sun for a couple of days, I can't detect any scent of resin. I would think with the clear coat to seal anything inside that they would be generally safe to wear. They're probably not going to be worn against the skin or for extended periods of time either. I have some protectaclear that's designed for metal jewelry which is a pretty tough clear coat. I might try that stuff. I wouldn't try this with something like a ring or earrings that are going to have closer contact with the skin.

翻譯年糕

Aaron Strome
2020-03-23 03:26:51

i did keychains..

Keith Yinger
2020-03-23 03:28:23

Ernest Sandridge Ill
2020-03-23 04:06:23

I would interested in the stl for these

Keith Yinger
2020-03-23 04:27:36

Ernest Sandridge Ill I saw Aaron's post and his keychains roll. Looked on thingiverse and didn't see an stl so I made these in fusion 360. I'm by no means an expert in Fusion 360 but this was a pretty simple design. A couple of circles and a couple of tangential lines, then extrude and there's a toilet paper roll.

Aaron Strome
2020-03-23 04:30:04

this is the one i ended up making in the end the one i posted wouldn't print the extra paper area. but this one works.

Keith Yinger
2020-03-23 04:30:30

Aaron Strome nice. Those look even better than mine. They have pleats and more texture and everything. Like I said I'm a complete new but 3D modeling so I thought I was doing pretty good to get a nice looking roll as I did haha

Aaron Strome
2020-03-23 04:33:28

you did a great job. i'm still trying to learn fusion 360. i find myself spending so much time fixing models i find online i really want to learn to make them.

Keith Yinger
2020-03-23 04:33:45

Aaron Strome ahh. Ya mine got a little weird at the start of the extra bit but it started after a few layers. it just kind of adds a bit of a torn corner look.

Aaron Strome
2020-03-23 04:35:08

few of mine turn out like that too but thought it added to it..

Keith Yinger
2020-03-23 04:35:57

Ya exactly


原文網址 Keith Yinger
2020-03-07 01:35:35

Figured I would post this here since it's kind of stumped me a little bit. I started getting random layers every 50 layers or so. Sat and watched the screen is it printed a file and sure enough every so often I would get an exposure like you see in the picture. Since I've never had any experience with these LCD screens dying I wasn't quite sure what to expect. I guess I kind of thought they would just get a hole burned through them and blocks wouldn't work anymore. Seems strange that it would only happen every so often. Either way I replaced the screen last night and now I'm back to running perfectly again. The third picture is the same file printed on the old LCD vs printed with the new LCD screen. Seems like that was the problem. All of the connection seem nice and tight when I took the old LCD screen out so I don't think anything was loose and causing it. Had my printer since mid Dec so only a little over 3 months old. If anyone is interested this is the LCD screen that I replaced it with from Amazon.
ELEGOO 5.5'' Inch 2K LCD for Mars 3D Printer with 2560x1440 Resolution and Tempered Glass Protection, Sharp LS055R1SX04 Light Curing Display with MIPI Connector, Compatible with Anycubic Photon https://www.amazon.com/…/B07X586JHK/ref=cm_sw_r_cp_apa_i_9L…

翻譯年糕

Steve Purita
2020-03-07 02:18:07


原文網址 Keith Yinger
2020-03-05 14:36:48

Is this a sign that my LCD screen is dying? It doesn't happen all the time but it seems to be every 50 layers or so. It should be exposing like it is in the first picture but every so often it glitches out. I tried different files on different USB sticks and it's the same thing.

翻譯年糕

Mika Gruszka
2020-03-05 14:41:52

Keith Yinger
2020-03-05 14:45:26

Benny Woolley
2020-03-05 14:47:00

Keith Yinger
2020-03-05 14:51:46

Chris Bondy
2020-03-05 16:58:06

Michael Van Kesteren
2020-03-05 17:04:02

Benny Woolley
2020-03-05 17:43:07

Keith Yinger
2020-03-06 00:04:19


原文網址 Keith Yinger
2020-03-05 00:50:39

Based on what I'm seeing it seems like my LCD screen is getting glitchy. It happens on the right side and it's happened with three different prints from two different usb sticks. And as I'm sitting here watching it run a print empty, every so often it does expose too much. You can see in the first picture of the screen what it is supposed to be printing but every once in awhile I get something like in the other pics of the screen. Since I've tried 3 different files on two different USB sticks I'm leaning towards the LCD screen going out.
Do you guys agree with me that that is probably an accurate assumption?
I kind of thought it would last a little bit longer since I've only had my printer since about the middle of December.
You guys think I'm right and thinking is the LCD screen going bad?

翻譯年糕

Keith Yinger
2020-03-05 01:16:18


原文網址 Keith Yinger
2020-02-05 00:28:25

Phew! That's about as close to running out of resin as I've ever come. Left this huge engine block card holder printing overnight. Thought I had plenty of resin in the vat when I went to bed last night. Woke up to this this morning. Luckily, there was just enough to finish it And it only messed up a little bit at the end. This thing is hollow as I can make it, and it still takes a ton of resin to print. My dad wanted it and bought 500ml of resin for it so I said i'd try it. Biggest thing I've printed so far and it actually worked pretty good.

翻譯年糕

Sean Bauer
2020-02-05 00:33:59

Keith Yinger
2020-02-05 00:36:47

Sean Bauer
2020-02-05 00:37:30

Keith Yinger
2020-02-05 00:38:35

Sean Bauer
2020-02-05 00:42:05

Sascha Briese
2020-02-05 00:51:16

Jairo Ledesma
2020-02-05 04:15:14

Keith Yinger
2020-02-05 04:17:10

Keith Yinger
2020-02-05 04:23:07

Kris Wainwright
2020-02-07 12:07:26

Keith Yinger
2020-02-07 14:08:28

Kris Wainwright
2020-02-07 23:26:20

Keith Yinger
2020-02-08 02:57:02


原文網址 Keith Yinger
2020-01-16 04:22:20

Had my proton for about two months now and I'm continually Blown Away by what it's capable of. Yeah.. Resin printers have some limitations but the things that you can do are pretty amazing. Printed his tractor for my father, try not to criticize my painting skills too much lol. Then I found this rose on thingiverse I just had to try. I didn't have enough red resin left to do a whole lot of anything so I took some clear and mixed what little red I had left. Ended up with this nice pink color. I was super skeptical on that Rose. I figured with the petals being so thin it would just all end up stuck to the bottom of it but it actually printed really nice.

翻譯年糕


原文網址 Keith Yinger
2020-01-07 01:08:32

Since I don't see too many finished products I figured I would post my latest project. Made this for my mom. My grandmother, her mother, passed a few years ago now. Her favorite bird was the hummingbird. So I put together this composition in her honor. I think I created a possessed item though. That thing would bring a tear to my eye every time I would pick it up to paint it. The plaque says "for mom with LOVE"
A big thanks to the folks in this group for being so helpful to us noobs. Y'all are a great bunch of people.

翻譯年糕

Simon Fullalove
2020-01-07 04:35:49

Keith Yinger
2020-01-07 05:41:21

Shawn Fisher
2020-01-07 10:14:54


原文網址 Keith Yinger
2020-01-03 05:56:21

Interesting the difference in Auto support choices between prusa on the left and chitubox on the right. I'm still too new to know which one would be better for printing this. Or are both equally as good..just different? Prusa seems sturdier but would you not want supports on the upper end like there is on the chitubox model?

翻譯年糕

Melecio Guzman
2020-01-03 05:59:44

Keith Yinger
2020-01-03 06:05:20

Melecio Guzman
2020-01-03 06:07:40

Keith Yinger
2020-01-03 06:10:37

Frank Padula
2020-01-03 06:20:34

Frank Padula
2020-01-03 06:20:42

Frank Padula
2020-01-03 06:21:04

Keith Yinger
2020-01-03 06:24:00

Keith Yinger
2020-01-03 06:26:29

Keith Yinger
2020-01-03 06:32:37

Keith Yinger
2020-01-03 06:33:08

Daniel A Trisler
2020-01-03 06:33:36

Frank Padula
2020-01-03 06:34:25

Frank Padula
2020-01-03 06:35:32

Keith Yinger
2020-01-03 06:36:33

Daniel A Trisler
2020-01-03 06:37:55

Keith Yinger
2020-01-03 06:37:59

Keith Yinger
2020-01-03 06:39:46

Frank Padula
2020-01-03 06:39:59

Keith Yinger
2020-01-03 06:40:48

Frank Padula
2020-01-03 06:41:18

Keith Yinger
2020-01-03 06:42:08

Keith Yinger
2020-01-03 06:42:33

Chad Elstad
2020-01-03 06:43:18

Keith Yinger
2020-01-03 06:43:38

Keith Yinger
2020-01-03 06:44:58

Frank Padula
2020-01-03 06:44:59

Frank Padula
2020-01-03 06:45:54

Melecio Guzman
2020-01-03 06:47:42

Keith Yinger
2020-01-03 06:48:44

Melecio Guzman
2020-01-03 06:51:01

Keith Yinger
2020-01-03 06:54:11

Melecio Guzman
2020-01-03 06:59:34

Nick Robinson
2020-01-03 08:49:55

Jarin Udom
2020-01-03 09:16:39

Chad Elstad
2020-01-03 23:05:54

Chad Elstad
2020-01-03 23:06:38

Chad Elstad
2020-01-03 23:07:24

Melecio Guzman
2020-01-03 23:31:21


原文網址 Keith Yinger
2020-01-03 00:28:28

So this is by far the largest thing that I have ever printed. It's an engine block business card holder. Why is it starting to separate like this? It's hollowed out with holes in it. Exposure time was 10 seconds per layer. Is that just a symptom of something being too large, or the walls too thin? I believe I hollowed it to 2mm to try and save some resin since this was such a large thing. The rest of it came out pretty well. Just some separation at the bottom corner.

翻譯年糕

Paul West
2020-01-03 00:34:00

Eric Sprague
2020-01-03 00:34:40

Keith Yinger
2020-01-03 00:36:10

Keith Yinger
2020-01-03 00:37:10

Paul West
2020-01-03 00:37:13

Paul West
2020-01-03 00:38:00

Evan Miller
2020-01-03 00:38:54

Keith Yinger
2020-01-03 00:39:02

Eric Sprague
2020-01-03 00:39:08

Keith Yinger
2020-01-03 00:39:20

Keith Yinger
2020-01-03 00:40:12

Paul West
2020-01-03 00:40:42

Keith Yinger
2020-01-03 00:41:42

Evan Miller
2020-01-03 00:42:43

Keith Yinger
2020-01-03 00:43:28

Mark Mosley
2020-01-03 01:39:36

Mark Mosley
2020-01-03 01:42:00

Kurt Bainum
2020-01-03 01:59:57

Keith Yinger
2020-01-03 02:06:45

Keith Yinger
2020-01-03 02:07:31

Victoria L. Cordone
2020-01-03 02:10:40

Logan Lees
2020-01-03 02:11:26

Kurt Bainum
2020-01-03 02:24:20

Keith Yinger
2020-01-03 02:27:39

Eric Sprague
2020-01-03 02:36:46

Eric Sprague
2020-01-03 02:37:56

Logan Lees
2020-01-03 02:39:59


原文網址 Keith Yinger
2019-12-23 08:12:37

So far I've had my Photon for about a week and a half and I'm having a lot of fun. I made my ten-year-old nephew a fishing reel that fits in an Altoids tin and my niece a Harry potter-style lantern/lamp. Many thanks to the guys on thingiverse where I got these designs as there is no possible way I could have designed anything like that myself yet. Made my own base and put a light in the lamp. If she doesn't get it for Christmas it's because I've kept it and put it in my own bedroom lol. I'm quite happy with how it turned out.

翻譯年糕

Keith Yinger
2019-12-23 08:14:33

Keith Yinger
2019-12-23 08:16:09

Thomas Störzner
2019-12-23 17:06:20

Keith Yinger
2019-12-23 23:28:36

Mikko Asikainen
2019-12-24 17:09:31

James Hooper
2019-12-24 17:57:28

Keith Yinger
2019-12-24 21:52:07

Thomas Störzner
2019-12-24 22:12:18


 

討論主題

全不選 常用關鍵字