• 3D列印服務
  • #maker+t=market
  • COSPLAY 3D 建模
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » mac

原文網址 Cory Lautzenheiser
2020-03-12 05:11:27

Not sure if I’m asking this question correctly but here goes. I just got my regular photon machine and made my first print with the anycubic gray resin. The first print i did turned out good but im wondering if it could be better. What exposure times should i be using for the layers? Heres pics of my first prints? Any general tips are appreciated for this newbie.

翻譯年糕

Chris Crute
2020-03-12 05:34:57

Andrew Smith
2020-03-12 05:40:46

Cory Lautzenheiser
2020-03-12 06:33:37

Andrew Smith
2020-03-12 07:51:44

Cory Lautzenheiser
2020-03-12 08:10:12

William Tatum
2020-03-12 08:33:17

Cory Lautzenheiser
2020-03-12 08:51:06

William Tatum
2020-03-12 08:53:07

William Tatum
2020-03-12 08:53:20

Cory Lautzenheiser
2020-03-12 08:57:32

William Tatum
2020-03-12 09:01:12

Merv Hinton
2020-03-12 14:26:38

Merv Hinton
2020-03-12 14:27:10


原文網址 Leonardo Escovar Quintero
2020-03-12 03:49:14

Hello!

I'd love to share the latest easy to print designs I sculpted on Zbrush printed on my Anycubic photon and also the original renders so you can compare and see how well a STL translate into a 3D print, preserving all the details.

The models are mostly supportless and the big ooze is pre-supported, they were printed in 0,03 mm layer height, printed in two different sizes. The bigger ones were primed in order to highlight details. You can also check all the models together in a smaller size for tabletop games.

Seriously, this machine is awesome! I'm considering upgrade to the Anycubic photon S soon. If you have any question related please let me know!

Cheers,

Leo.

你好!

我很樂意分享我在zbrush上列印的最新的設計, 以及原始渲染圖案, 以便你可以比較並檢視stl翻譯成3 d列印, 儲存所有細節.

這些模型大多是沒有支援的, 大ooze是預先支援的, 它們列印在0,03 mm層高度, 印制兩種不同尺寸. 更大的, 是為了突出細節. 你也可以一起檢視所有模型, 以較小的桌上的遊戲.

說真的, 這台機器太棒了! 我正在考慮很快升級到anycubic光子s. 如果你有任何問題, 請告訴我!

乾杯,

里奧.

· 查看原文 · 為此翻譯評分

Billy Pauler
2020-03-12 04:05:10

Leonardo Escovar Quintero
2020-03-12 04:07:47

Wes Mischke
2020-03-12 04:21:27

Leonardo Escovar Quintero
2020-03-12 04:22:04

Marcin Smoliński
2020-03-12 04:31:02

Leonardo Escovar Quintero
2020-03-12 04:31:39

Wes Mischke
2020-03-12 04:32:25

Leonardo Escovar Quintero
2020-03-12 04:33:34

Shawn Atlas
2020-03-12 04:50:12

Aaron Maynard
2020-03-12 04:51:03

Leonardo Escovar Quintero
2020-03-12 04:52:46

Shawn Atlas
2020-03-12 05:27:22

Leonardo Escovar Quintero
2020-03-12 05:29:13

Shawn Atlas
2020-03-12 05:29:23

Shawn Atlas
2020-03-12 05:30:58

Philip Reeves
2020-03-12 05:39:38

Leonardo Escovar Quintero
2020-03-12 05:42:48

Philip Reeves
2020-03-12 05:50:42

Dillon Olney
2020-03-12 06:58:19

Leonardo Escovar Quintero
2020-03-12 07:10:53

Shawn Atlas
2020-03-12 07:27:47

Leonardo Escovar Quintero
2020-03-12 07:31:44

Jim Appleby
2020-03-12 10:17:00

Wes Mischke
2020-03-12 10:23:17

Wes Mischke
2020-03-12 10:28:35

Leonardo Escovar Quintero
2020-03-12 11:06:01

Pablo Lescano
2020-03-12 12:16:14

Leonardo Escovar Quintero
2020-03-12 12:28:24

Wes Mischke
2020-03-12 14:40:01

Wes Mischke
2020-03-12 14:41:44

Wes Mischke
2020-03-12 22:25:45

Leonardo Escovar Quintero
2020-03-13 01:38:27


原文網址 Thomas Holm
2020-03-12 00:58:40

My first technical fail. The build plate came loose and unlevelled. So the base is uneven and there is a layer shift some 4 cm up. So will need to re-level and tighten that srew better.
At the same time I'm very impressed. Apart from the layer shift the print quality is great! (0.01 mm, 7 s main layers, 60 s baselayer, Anycubic Green Transparent that came with the machine.) Two spots where I need to move a support (Thank You 3DPrintingPro), but other than that actually a great print.
So thank you all for the advice you give here and on other platforms.

我的第一個技術失敗. 構建板鬆散並解開. 所以基地是不均衡的, 有一個層移大約4釐米. 所以, 需要重新調整並收緊這個更好.
同時, 我印象深刻. 除了層層輪換, 列印質量也很棒! (0.01 mm, 7 s主層, 60 s baselayer, 任何與機器一起帶來的綠色透明.)兩個我需要移動支援的兩個地方(謝謝3 dprintingpro) , 但除此之外, 實際上是一個偉大的印刷品.
所以感謝大家在這裡和其他平台上的建議.

· 查看原文 · 為此翻譯評分

Sander van Deijl
2020-03-12 01:51:58

Thomas Holm
2020-03-12 01:56:45

Hoghead Hoffer
2020-03-12 12:25:59


原文網址 Steve Elliott
2020-03-10 22:05:35

I'm looking to buy a photon but nervous of the machine producing the detail on the parts that I need. Would anyone be prepared to print out a very small test part for me to see if it can be done?

翻譯年糕

Richard Humble
2020-03-10 22:15:07

Robert Jeppesen
2020-03-10 22:17:11

Robert Jeppesen
2020-03-10 22:19:11

Steve Elliott
2020-03-10 22:22:22

Richard Humble
2020-03-10 22:22:57

Steve Elliott
2020-03-10 22:23:28

Scott Pavlich
2020-03-10 22:24:59

Michael Van Kesteren
2020-03-10 23:32:45

Michael Van Kesteren
2020-03-10 23:33:03

Steve Elliott
2020-03-11 00:24:26

Scott Pavlich
2020-03-11 00:26:54

Alvaro Rodriguez
2020-03-11 02:25:43

Alvaro Rodriguez
2020-03-11 02:25:57

Scott Pavlich
2020-03-11 03:08:33

Michael Van Kesteren
2020-03-11 04:51:19

Scott Pavlich
2020-03-12 00:33:25

Scott Pavlich
2020-03-12 00:33:38

Scott Pavlich
2020-03-12 00:33:49

Scott Pavlich
2020-03-12 00:34:05

Steve Elliott
2020-03-12 05:12:03

Steve Elliott
2020-03-12 05:12:31

Scott Pavlich
2020-03-12 05:19:25


原文網址 Juan B. Ortiz
2020-03-10 07:29:10

I bought a photon a while back and am finally getting around to using it this weekend. Does anyone have a “starter kit” list? Or recommendations? Besides the machine and liquid, what else do you suggest I get? I’ve heard latex gloves& eye protection. What else? Thank you for any help you can offer

翻譯年糕

Daniel Faubert
2020-03-10 07:34:40

Justin Marks
2020-03-10 07:41:03

Juan B. Ortiz
2020-03-10 07:42:00

Juan B. Ortiz
2020-03-10 07:42:14

Joshua S. Murray
2020-03-10 07:42:24

Travis Callahan
2020-03-10 08:58:17


原文網址 Pierre Gelinas
2020-03-09 22:40:35

Hi … I just got an Anycubic Wash and Cure Machine and I wanted to be able to let the Washing Basket on the Machine itself to drip in the IPA Tub and so I have design a 2 Parts Adapter that you can fit on the top of the Machine and Hook the Basket on it and let it drip and dry there for the time the IPA Evaporate from the parts and Basket … then you can remove it and install the Rotary bed and cure the Parts … this is my first Draft but I am already thinking of another Bracket that might be easier to Print …. Enjoy!

here is the link to the thingiverse page

https://www.thingiverse.com/thing:4211287

嗨... 我剛買了一台任何立方體洗滌和治癒機, 我想讓機器上的洗衣籃滴在ipa浴缸里, 所以我設計了一個2個2個零件介面卡 機器的頂部, 把籃子綁在上面, 讓它滴滴和乾燥, ipa從零件和籃子蒸發時... 然後你就可以把它移走, 安裝旋轉床治癒... 是我的第一份草稿, 但我已經在考慮另一個可能更容易列印的括號.... 享受吧!

這是thingiverse頁面的連結

https://www.thingiverse.com/thing:4211287

· 查看原文 · 為此翻譯評分

Stan Westmoreland
2020-03-09 22:51:53

Mason Chapman
2020-03-09 23:04:42

Kirk Sturgulewski
2020-03-10 00:00:19

Pierre Gelinas
2020-03-10 00:25:12

Pierre Gelinas
2020-03-10 00:26:45

Kirk Sturgulewski
2020-03-10 00:28:06

Pierre Gelinas
2020-03-10 00:30:24

Pierre Gelinas
2020-03-10 00:35:09

Pierre Gelinas
2020-03-10 00:35:35

Kirk Sturgulewski
2020-03-10 00:53:50

Stan Westmoreland
2020-03-10 01:21:02

Mark Rhodes
2020-03-10 04:02:23

Ben Knipper
2020-03-10 09:58:39

Pierre Gelinas
2020-03-10 23:16:30


原文網址 Lee Rogers
2020-03-09 21:11:59

Hi, thanks for accepting. About to push the order button on a Photon Zero, and there seems to be a lack of reviews online...does anyone have one? It's to compliment 2 x fdm machines I have for smaller more detailed models. The size, and the fact one reviewer stated hardly any smell attracts me. Any views on this? Thank you

翻譯年糕

Evan Boone
2020-03-09 21:15:01

Telli Mantelli
2020-03-09 21:15:04

Tyler Cox
2020-03-09 21:19:25

Bob Deblier
2020-03-09 21:20:12

Bob Deblier
2020-03-09 21:24:31

Charlie Yoshi Locke
2020-03-09 22:03:02

Tyler Cox
2020-03-09 22:22:22

Lee Rogers
2020-03-09 23:04:00

Lee Rogers
2020-03-09 23:04:53

Lee Rogers
2020-03-09 23:06:18

Lee Rogers
2020-03-09 23:07:25

Telli Mantelli
2020-03-10 00:04:42

Nipuna Gunarathne
2020-03-10 00:50:36


原文網址 Jolene Sweeney
2020-03-09 07:09:27

Anyone have a coupon code for the wash and cura machine.... I really want one but its double the price I just paid for a photon zero..... ? ? ?

翻譯年糕

Derek Riddle
2020-03-09 07:52:36

Riika Magnus
2020-03-09 10:55:04


原文網址 Michael Enoches
2020-03-08 23:25:48

So now that I owned resin printers for 18 months now I have some info for you all.
After 1000 hrs on the Photon S screen replacement and one going at 2000 hrs and still going. What I did when they came in was I looked at the whole machine all sides and such. And tried an experiment. There is a large fan on the bottom of these machines as well as Egeloo mars and others. They all have feet that raise the unit up about 1 inch at most. So I decided to raise one Mars and then One Photon I cut a hole below the unit into my stand/platform where the fan/unit would be above. This created better air flow and I have found that machine runs less hot and the lcd lasted longer up to 2x as much. So I would say Rasie Your Machines off the platform you have it on. See photos below on my test units. I have 8 Photons and 4 Mars machines and s400s and Phenom and Transform machines here as well.
Good luck and Happy Printing.
Michael LR3D

所以現在我擁有樹脂印表機18個月, 現在我有一些資訊告訴大家.
1000小時後, 光子s螢幕更換, 一個在2000小時後, 仍在進行中. 他們進來的時候我所做的是我看著整個機器的各個方面等等. 嘗試了一個實驗. 這些機器的底部有一個大粉絲, 還有egeloo火星和其他人. 他們都有腳能讓單元提高了大約1英吋. 所以我決定舉起一顆火星, 然後一個光子, 我在單位下面切了一個洞進入我的站台/平台上的球迷/平台. 這創造了更好的空氣流動, 我發現機器運行更少, 液晶顯示器持續更長至2倍. 所以, 我想說rasie你的機器離開了平台. 在我的測試單元檢視下面的照片. 我這裡還有8個光子和4個火星機器, s400s和phenom和變形機.
祝你好運, 印刷快樂.
邁克爾· l3d

· 查看原文 · 為此翻譯評分

Todd Norton
2020-03-08 23:28:38

Kees van Dongen
2020-03-08 23:29:20

Benjamin Wijaya
2020-03-09 00:00:03

Michael Enoches
2020-03-09 00:02:53

Benjamin Wijaya
2020-03-09 00:07:36

Michael Enoches
2020-03-09 01:03:05

Benjamin Wijaya
2020-03-09 01:06:03

Nipuna Gunarathne
2020-03-09 03:48:34

Jon Allitt
2020-03-09 04:20:00

Jonny Marable
2020-03-09 05:29:08

Michael Enoches
2020-03-09 05:31:48

Rantinan Winters
2020-03-09 09:47:37

Richard Hale
2020-03-09 16:56:01

Michael Enoches
2020-03-09 17:18:05

Michael Enoches
2020-03-09 17:19:15

David Wenrich
2020-03-11 23:46:57


原文網址 Chris Joy
2020-03-08 18:04:01

Hey folks, hoping someone can shed light on my issue. I’ve had my photonS for over a year, it runs well and I barely ever have an issue that I can’t resolve quickly. My screen recently crapped out so I replaced it and since doing so cannot get a print to stick to the bed if my life depended on it.

I’ve tried re-levelling the bed numerous times
My machine is perfectly level
The new screen works properly
I’m using resin I’m experienced with
Haven’t had any luck on different resins either
I tried re-sanding the bed on a perfectly flat surface to 220grit

I’m at a loss.... any ideas?

翻譯年糕

Drew Cski
2020-03-08 18:08:27

Marisa Warner Smith
2020-03-08 18:09:13

Jennell Jaquays
2020-03-08 18:09:30

Chris Joy
2020-03-08 18:13:17

Chris Joy
2020-03-08 18:13:53

John Chrapkowski
2020-03-08 18:32:57

Robert Mun
2020-03-08 19:41:01

Thomas Harrell
2020-03-08 22:04:31

Chris Joy
2020-03-09 19:54:44


 

全不選 發文排行