• 3D列印服務
  • #maker+t=market
  • COSPLAY 3D 建模
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » smoother

原文網址 Ivan Del Bene
2020-03-17 16:44:49

Antialiasing question .. What setting do you use? The process should skip a total of pixels each layer for a smoother finish. But doesn't that affect the details? Thank you ?

翻譯年糕

Michael Pescuma
2020-03-17 21:48:57

It CAN affect the details... it comes down to what you are printing. I like to keep mine at 4x to have a compromise between possible detail loss and smoothing.

Ivan Del Bene
2020-03-17 21:54:11


原文網址 Callum Stephen Higgins
2020-01-21 06:29:47

Couple of weeks into using my photon S. Got a quick question, the print in picture 1 is printed at 0.5 and the print in picture 2 is printed at 0.3. how come the 0.3 shows a lot more visible lines then at 0.5? I thought smaller layer height meant smoother finish?

翻譯年糕

Nicolai Lorenzen
2020-01-21 06:34:44

Justin Leone
2020-01-21 06:48:51

Callum Stephen Higgins
2020-01-21 07:04:18

Callum Stephen Higgins
2020-01-21 07:05:38

Antonio Regidor
2020-01-21 07:08:11

Callum Stephen Higgins
2020-01-21 15:34:15

Antonio Regidor
2020-01-21 15:41:55

Nicolai Lorenzen
2020-01-21 18:16:43


原文網址 Rene Fritzsching
2020-01-15 05:27:27

Hello- please help to understand:
What ist antialiasing.And how works it realy?
only what i read there ist that it makes the layers smoother. But why ?and What ist the different between antialiasing Level 2 , 6 and 8 in chitubox?
Thank you

翻譯年糕

Brett Isaacs
2020-01-15 05:38:08

Rene Fritzsching
2020-01-15 05:51:02

Arnar Helgi Adalsteinsson
2020-01-15 06:51:03


原文網址 Testo Il Testabile
2020-01-04 05:20:32

First print ever, skipped anything test/demo related and cut to the chase: my application are teeth models.

Read everything and beyond while on vacation when the unopened Photon S was waiting for me to come back, sealed with kapton the borders of the screen, leveled with the printer paper sheet method, checked the FEP to be at 297Hz, room temperature just shy of 19°C, translucent green resin that everyone seems to be getting bundled with their S's, poured just a few mm's in the VAT, 0.02mm layer, 4 bottom layers at 60s and the rest at 8s, hollow model with 1mm thick walls, 3 holes on the bottom and placed a tube in meshmixer from one side to the other near the base; got reassuring plopping sound at most plate risings.

Gosh the smell! Headache and irritated nasal cavities, missus yelling at me, but the DeStinkyNator is a long-ass print and I am actually thinking about just building something with maybe wood PVC and what else. Used no gloves up to this point as I'm used to handle dangerous stuff without ever touching it, so my fingers never went on the resin, nor the resin on anything else except the vat.

Two hours print, after which I rotated the plate 90° so resin could drip back in the vat. Now the printer is resting while covered with the box it was shipped in, so no light whatsoever hits it, because sure as heck I don't plan on refilling the tank each time, even if my prints will be mostly far apart.

In the upcoming days I will get to building a handmade destinkynator, and wash/cure the model (UV strips are still on the way but I've got a weird old machine with couple Philips UV tubes inside that I can use).

I was expecting drama at the first go, and had a lot of uncertanties since I supposed I had to increase the exposure time, but all was way smoother that I thought (model included ? )

翻譯年糕

David Minford
2020-01-04 06:40:59

Brian Gabriel
2020-01-04 08:30:31

David Minford
2020-01-04 09:36:33

Johnny Grant
2020-01-04 10:24:03

Testo Il Testabile
2020-01-04 15:54:35

Testo Il Testabile
2020-01-04 15:57:38

Sander van Deijl
2020-01-04 16:52:51

Testo Il Testabile
2020-01-04 20:42:39

Lucas Parard
2020-01-05 00:07:27

Testo Il Testabile
2020-01-05 00:10:05

Bob Smith
2020-01-05 00:26:35

Lucas Parard
2020-01-05 00:37:36

Testo Il Testabile
2020-01-05 00:39:51

Lucas Parard
2020-01-05 01:08:46

Testo Il Testabile
2020-01-05 06:17:20

Lucas Parard
2020-01-08 05:52:10

Lucas Parard
2020-01-08 05:52:15

Testo Il Testabile
2020-01-09 00:39:13

Lucas Parard
2020-01-09 01:02:42

Lucas Parard
2020-01-09 01:02:47

Testo Il Testabile
2020-01-09 02:17:38

Lucas Parard
2020-01-09 02:46:29


原文網址 Kurt Bainum
2020-01-02 15:15:45

Follow the photos as you read. Got my Photon "S" a few weeks ago. Ho scale model building is my thing. Always wanted to do proper Victorian trim at a small scale. FDM printers were never capable of detail that small. Resin printers now affordable, time to give it a try. I never bothered with a test print. I just started with a few thingivewrse items. A coachman and a greek temple. Why not? When I saw his thumbs I knew great things were about to happen. I drew a plan in Sketchup for a full size Shaker Sewing desk I will be building so why not try to print it and see what happens. It sliced and printed just fine with stock settings and slicer that came with the Photon S. Rubbing my hands together I went back to Sketchup to draw up a Victorian house with the kind of window trim I have been dreaming about in HO scale. Hours spent learning Chitubox Slicer and just press print right? Not so fast! Weeks of failures spent learning about support placement, print angles, layer thickness vs exposure time and what the hell is voxilization or a Voxel anyway? My basement was too cold for the grey resin according to my cheap Horrible Fright laser thermometer. A strip heater powered through a Dremel speed controller now keeps the vat at 30c. See the photo of the strip heater wrapped around the vat. I was getting horrible lines on my prints until I learned about pixel aliasing. Did not matter what layer thickness I used. A 30 degree twist in the Z axis solved that problem and brought the voxilization to a maximum randomness to print smoother surfaces. Apparently prints with lots of right angles suffer from this. Who knew? A few more lessons learned with failures about needing support in just the right places and I am now cranking out windows and trim the likes of which I have never seen. I now use 0.02mm at 7 seconds 30c temp. Anycubic grey. 3 bottom layers 30 seconds. Models are 30 degrees on XY and Z. I use only light support with cone contact at .3mm for these small items. I am privileged to live in an age where I can now hold in my hands, within hours, anything I can draw. How was your first experience with 3D printing?

翻譯年糕

Michael Marino
2020-01-02 16:48:54

Walid Khier
2020-01-02 17:10:37

Walid Khier
2020-01-02 17:11:41

Kurt Bainum
2020-01-02 17:51:40

Sandro Rogerio Machado
2020-01-02 18:27:11

Ben Elwalid
2020-01-02 19:50:30

Paul McDaniel
2020-01-02 20:01:15

Emily Whitehouse
2020-01-02 20:17:22

Grant Elliott
2020-01-02 21:25:16

Uriah Redden
2020-01-02 21:32:56

Ryan Przybyl
2020-01-02 21:44:48

James Skiffins
2020-01-02 21:52:10

Erik Morris
2020-01-02 21:58:15

Kimberly Jacob
2020-01-02 22:17:57

Jason Dickson
2020-01-02 22:27:55

Dave Ramirez
2020-01-02 22:47:15

Mark Mosley
2020-01-02 23:04:57

Alejandro Morales
2020-01-02 23:05:13

Lee Perry
2020-01-03 00:02:30

Kurt Bainum
2020-01-03 01:13:03

Kurt Bainum
2020-01-03 01:15:17

Kurt Bainum
2020-01-03 01:17:50

Kurt Bainum
2020-01-03 01:23:28

Diogo Pereira
2020-01-03 04:39:26

Kurt Bainum
2020-01-03 05:55:59

Angie Angie
2020-01-03 08:47:48

Kurt Bainum
2020-01-03 09:48:33

Diego Seminario De Col
2020-01-03 09:56:43

Mitchell Kruik
2020-01-04 17:52:20

Rob McEwen
2020-01-05 05:55:54


原文網址 Stephen Mitchell
2019-12-29 09:35:20

hey guys, what's the best postion to print small miniatures in? doing space mariens pretty much and want to get smoother pads if i can, i hear printing on the 45 degree is optimal for flat objects, is this true with helmets, torsos and shoulder pads? thanks! also general tips for printing wargaming stuff is appreciated, using elegoo's standard grey resin.

翻譯年糕

Nick Taylor
2019-12-29 09:40:04

Kempster Kevin
2019-12-30 15:30:54


原文網址 Simon Walker
2019-12-29 08:03:28

my 2 new phtons have silver bottoms on the build plate but my older one has an all blue build plate including the bottom. iv noticed the blue one has a slightly smoother finish, any reason for the silver finish on the newer version of the standard photon (not the S model)

翻譯年糕

Sean Latto
2019-12-29 08:36:58


原文網址 Daniel Feeney
2019-11-20 09:07:11

Working on Ultramarines as my next Truescale Horus Heresy squad. I enabled Anti-Aliasing on my Photon and I'm getting even smoother results than before! I'm printing these at 0.3 layer height.

Public release when they're all done, but if you'd like to get them as each model is finished and test-printed, you can support the cause over on Patreon.

https://www.patreon.com/LegioTruescale 翻譯年糕

Colin Graham
2019-11-20 09:23:51

Cody Alan Brown
2019-11-20 09:30:57

Daniel Feeney
2019-11-20 09:34:07

Propylene Foliescu
2019-11-20 17:45:22

Pat Sinclair
2019-11-20 18:29:21

Job Moolenaars
2019-11-20 20:07:14

Job Moolenaars
2019-11-20 20:11:30

Daniel Feeney
2019-11-20 21:20:25

Daniel Feeney
2019-11-20 21:20:51

Eric Pribish
2019-11-20 23:12:18

Daniel Feeney
2019-11-20 23:14:06


原文網址 Sunny Shukla
2019-10-24 04:58:30

So so close to get a great print now, but query is it possible to get rid of the swirls and make it smoother how would I acheive this? This is so addictive I've almost used a bottle already ?

翻譯年糕

Amir Butt
2019-10-24 05:00:20

Leon Photon
2019-10-24 05:05:02

Phillip Lovelace
2019-10-24 05:06:30

Mitchell Knight
2019-10-24 05:06:33

Sunny Shukla
2019-10-24 05:08:57

Sunny Shukla
2019-10-24 05:11:29

Michael Enoches
2019-10-24 05:12:35

Sanjiyan Unkara
2019-10-24 05:12:48

Phillip Lovelace
2019-10-24 05:12:49

Ben Cox
2019-10-24 05:13:13

Giancarlo Arriola
2019-10-24 05:13:28

Sunny Shukla
2019-10-24 05:14:13

Ben Cox
2019-10-24 05:14:45

Ben Cox
2019-10-24 05:16:03

Samuel Hussey
2019-10-24 05:20:20

Giancarlo Arriola
2019-10-24 05:31:42

Sunny Shukla
2019-10-24 05:34:11

Ben Cox
2019-10-24 06:01:47

Bob Ivan
2019-10-24 06:15:49

Matthew Barnes
2019-10-24 06:33:04

Scott Peterson
2019-10-24 06:46:09

Kyle Standring
2019-10-24 07:38:16

Mark Anthony Vasquez
2019-10-24 07:40:15

Mark Wardle
2019-10-24 08:25:42

Lee Johnson
2019-10-24 09:15:07

Lee Johnson
2019-10-24 09:15:34

Rigo Arevalo
2019-10-24 09:36:13

Dustin McKnight
2019-10-24 09:52:13

Chris LaRose
2019-10-24 11:44:47

Danny Lloyd
2019-10-24 11:58:25

Sunny Shukla
2019-10-24 13:12:38

Charles Rieken
2019-10-24 16:53:37

Sunny Shukla
2019-10-25 01:57:20

Sunny Shukla
2019-10-25 01:59:39

Sunny Shukla
2019-10-25 02:01:50

Remms Kiel
2019-10-25 03:40:33

Sunny Shukla
2019-10-25 03:41:07

Remms Kiel
2019-10-25 03:41:33

Charles Rieken
2019-10-25 04:46:43

Sunny Shukla
2019-10-25 04:47:54

Marcello Ganzerli
2019-10-28 15:20:07

Marcello Ganzerli
2019-10-28 15:21:18

Kempster Kevin
2019-10-29 01:23:51


原文網址 Paweł Pyrczak
2019-09-29 23:45:32

Guys it is that normal on Anycubic Orange resin? Its more smoother form vs blue or red.

翻譯年糕

Tibi Sucuturdean
2019-09-29 23:48:10

Dave Dickey
2019-09-29 23:52:39

Paweł Pyrczak
2019-09-29 23:53:37

Dave Dickey
2019-09-29 23:54:20

Paweł Pyrczak
2019-09-29 23:56:09

Dave Dickey
2019-09-29 23:56:54

Scott Peterson
2019-09-30 00:04:33

Paweł Pyrczak
2019-09-30 00:06:25

Scott Peterson
2019-09-30 00:11:13

Paweł Pyrczak
2019-09-30 00:12:31

Scott Peterson
2019-09-30 00:15:24

Sakis Goumenidis
2019-09-30 00:16:13

Paweł Pyrczak
2019-09-30 00:21:35

Andris Drulle
2019-09-30 00:25:00

Sakis Goumenidis
2019-09-30 00:51:20

Handrez Pintubola
2019-09-30 01:43:47

Yawmiyatu Lmouzanbik
2019-09-30 05:12:04

Yawmiyatu Lmouzanbik
2019-09-30 05:12:11

Christos Boukos
2019-10-01 03:26:12

Tony Watkins
2019-10-04 20:03:21

Michael Harley
2019-10-05 06:26:58