Anycubic Photon Printer Owners 造訪社團 » youtube

Hi everyone, my partner and I just ordered a Photon today. I'm reading the FAQ page in the group details and watching the 101 video on youtube from 3D print farm. I'm pretty excited to expand my 3D printing experience from my ender 3 to this. I will do my best to not post dumb questions that I can answer by searching the group/google first :)

翻譯年糕

I want to say so many bad things about Anycubic after having delt with their customer support after they sent me a printer with a cracked window, busted hinge, and major problems with leveling and homing. I also purchased it from their official website and they still want me to pay for return shipping and they aren't honoring their official return policy as their employee already admitted it was a defect.
But I needed to get some prints done quick for customers and picked up the Phrozen Mini without thinking much about it. This thing is amazing right out of the box. .05mm height, layer print time at 1.5sec and took a little over 2.5 hours to print for 1173 layers. Here's a couple vids of the FIRST PRINT right out of the box.
Anycubic is no longer a business I will work with and will avoid buying any future products with them. I don't want to bash them too hard, because this could be a VERY rare defect, but the way the company is handling this situation is very poor.
Do yourselves a favor and get the Phrozen Mini. I picked it up from Amazon for the easy return just in case it had problems like the Anycubic and luckily everything is great. Only thing I'm a little nervous about is the plastic resin vat. It feels a little weak, but I think it will be ok as I long as it's handled gently.
Removing First Phrozen Print: https://www.youtube.com/watch?v=_XfhuF2cw7o 翻譯年糕

Just bought a new Anycubic Photon a few days ago. When pressing the "Home" button it squashes the build plate against the LCD screen making the paper unmovable. Their customer service said it should be stopping before the LCD just like my original. It also came with a cracked window from screw being tightened too much and a broken hinge on the door.
I figured it wasn't too bad as there's no stressing sound with the "Home" issue, so I decided to level and print. Then when starting a print, the back half of the build plate pops up cause nothing to stick on the back half. Tried about 6 different prints, as well as using my original build plate. Only the front half stuck.
My first Photon I got a little over a year ago still prints amazing. Some adhesion issues sometimes, but nothing too bad. Just finished the Spiderman diorama by Sanix. Tried the new build plate, so the build plate is fine. They tried to play it off saying I don't know how to level and it's just getting on my nerves now. I've been printing over a year and it took sales 3 days to get back to me after I spammed the shit out of their ticket service when they stopped contacting me.
If there is an easy fix, I would love to know. But after troubleshooting everything, I can't figure out the reason why.
Everything is even, Z-Axis stuff isn't bent, LCD screen is level, and the new build plate worked fine on my old machine.
Now they want me to pay for return shipping as they think it's an issue with my leveling. I'm really starting to hate Anycubic ? A year ago I would have sworn by them.
Link to "Homing" youtube vid: https://www.youtube.com/watch?v=1iPMdlo4Zf0 翻譯年糕

I'm trying to convert a tif. file to print and I'm having issues. It's a ultrasound format, but a tif. file from my understanding is a stack of photos summed up into this format, and is similar to how the photon saves its files.

Anyone here print ultrasounds?
(I've also googled and youtubed, no luck)

翻譯年糕

A list of links that are technically accurate..worthwhile truthful and all you need to answer all your queries https://www.chitubox.com/indepth_17839_1.html https://www.facebook.com/xinfu.xie https://www.youtube.com/watch?v=roAqm5c3rfU https://www.google.com/search?q=youtube%20anycubic%20replace%20fep&pws=0&gl=us&gws_rd=cr&fbclid=IwAR3uuVVVKP4Suu6gPc7EYBH5eQaIXQPwKTSFaEoQvVagoPDwTAAgbYS7QDU#gws_rd=cr&kpvalbx=_awVVXpLFILqG1fAP1pePsAk9 https://www.youtube.com/channel/UCbv2mDrRqXovPdahRyoCFhA 翻譯年糕

HI! I'm very brand new to this, so new i just setup my printer recently. has anyone else have to figure this out without a manual? I emailed them and asked and used youtube to set it up, but is there a manual that they have posted online? i couldn't find it. i want to start and learn but i don;t want to mess it up! thanks in advance!

翻譯年糕

I was just wondering if anyone knew if this specific California version (SW-050) of Sprayaway works to clean the build plate? I saw recommendations for the brand on YouTube, but the can looks different.

翻譯年糕

Need some advice.

My prints even after cleaning are incredibly sticky. There's almost no chance that it's residual resin because after a wash in cleaner, I'm curing these things overnight and then hit it even more with my UV flashlight for a good minute or two up close just to be thorough.

I'm assuming that it's the cleaner I'm using that's making it so sticky. I'm using the Mean Green that Uncle Jessey on Youtube recommended and a sonic cleaner (I saw the video about the heater and yes I'm no longer filling the tub with mean green or leaving the unit plugged in) but for now I'm just trying to make it not sticky.

I'm also driven to think it's the left over cleaner that's sticky because AFTER I cleaned it I thought "Okay it's safe to touch" and after handling it a bit, the skin on the tips of my fingers started to flake off a bit. A telltale sign that you're touching heavy-duty cleaning solutions. (Wearing gloves until I KNOW that it's clean now)

I've tried warm soap and water, cold water, washing it with IPA. Nothing seems to get this thing to not be super sticky.

I'm considering not using the green stuff anymore and switching back to 99% IPA. Give me your experiences/suggestions

需要一些建議.

打掃後我的指紋也非常粘. 幾乎不可能是殘留樹脂, 因為在清潔洗衣機洗完後, 我將整晚修補這些東西, 然後用我的紫外線更近一分鐘或兩分鐘.

我假設它是我使用的清潔劑使它變得如此粘. 我使用jessey叔叔在youtube上推薦的卑鄙綠色和一個聲波清潔器(我看到了關於加熱器的視訊, 是的, 我不再是, 我不再用粗糙的綠色或離開單元插上), 但現在我只是嘗試 讓它不粘.

我也被驅使認為是左邊的清潔劑很粘, 因為清理乾淨後, 我覺得"好吧, 它 是 安全 的", 處理一下, 手指上的面板開始脫掉了. 有點. 一個告訴你正在觸控重型清潔解決方案的跡象. (戴著手套直到我知道現在乾淨了)

我試過溫暖的肥皂和水, 冷水, 用ipa一起洗. 似乎沒有甚麼能讓這東西變得超級粘.

我正在考慮不再使用綠色的東西, 並切換回99 % ipa. 給我你的經驗/建議

· 查看原文 · 為此翻譯評分

I joined this group a few weeks ago and I have been reading and studying a lot mostly due to a torn achilles tendon. I am grateful for the all the posts and information in this group.
I am getting ready to start my first print using Anycubic Grey Resin. I have attached photos of my supports in chitubox, my settings for the printer and for the resin. Would you review and let me know if you think I have a high chance of success. I have seen a number of failed prints and I would like to avoid that as much as possible. I also turned on anti-aliasing and set it to level 4. My firmware and everything is all updated and ready to go as far as i know. I checked level and did everything per the instructions on youtube and other forums as well.
Should i tilt my project 45 degrees or so? Are my light supports good enough or should i add some heavy supports Is there any reason not to use the anti aliasing Slicing is only necessary for large files that don't fit the print area. Is this correct?
Thanks for your time and consideration. 翻譯年糕

I wonder how long it would take my Photon S to print one of these? I know it's only February, but I'm putting this on my Christmas list ? ? Stunning!!! https://www.youtube.com/watch?v=OCto6qSjIXw 翻譯年糕