Anycubic Photon Printer Owners 造訪社團 » TIP

I need some help! My Photon isn't showing up any of the prints I slice when I put in a the usb flash drive. I've tried multiple flash drives and even tried directly into the back of the motherboard but it's still not reading anything. I'm not getting any kind of error message just blank squares where print files should be. Has anyone encountered this before and have a successful fix? I'm hoping I don't have to replace the mobo. Appreciate any help!

翻譯年糕

Hi.

I've got question. I used to run Photon and decided to "upgrade" to Zortrax Inkspire some time ago. but I've got quality issues. I use original and 3rd party resins.

I've been searching they FB group and tried with customer support, but they keep saying it's either no problem or area temperature difference causing these issues...

I have funny sagging/ deformations at support-part contact point. Does anyone know what could be a reason?

I started pre-warming resin and keep 22-24C around printer, resin's well stirred (no bubbles), slowed lifting speed, increased exposure and exp time-off, new fep, tried hollowed or full body (no difference), thickened supports too (2mm pillar and 1mm tip) Printer's in stable position and all leveled.

I think it could be either mechanical issue or something is wrong with LEDs, but it's only guessing.

I understand it's different printer, but maybe someone came across similar issue and could help me to resolve it.

Thank you very much for your help.

嗨.

我有個問題. 我曾經運行photon, 不久前決定"升級" zortrax inkspire. 但我有質量問題. 我使用原創和第三方樹脂.

我一直在搜尋他們的fb組, 並在客戶支援下嘗試, 但他們一直說, 要麼沒有問題, 要麼地區溫度差異導致這些問題...

我在支援部分接觸點有滑稽的低調/變形. 有人知道甚麼可能是原因嗎?

我開始預熱樹脂, 在印表機周圍保持22-24 c, 樹脂的井噴(無泡沫), 減慢, 增加曝光和exp, 嘗試空洞或全身(無差別), 厚 也支援(2毫米柱和1毫米提示)印表機處於穩定的位置, 全部平穩.

我認為這可能是機械問題, 或者led有問題, 但它只是猜測.

我理解這是不同的印表機, 但也許有人遇到了類似的問題, 可以幫我解決它.

非常感謝您的幫助.

· 查看原文 · 為此翻譯評分

Build times are mostly based on total height of the print, right? Doesn't matter how wide or complex. If it's taller it will take longer? I'm trying to figure out ways to be more efficient with plate loading and putting more tall items on a print seems reasonable so instead of printing the same large thing multiple times and keeping print time long I'm building all the tall pieces/copies at once at the long build time and the shorter pieces/copies for the shorter build times.

Is my reasoning sound?

翻譯年糕

I've had amazing success with white, but I'm running out and have 2 unopened bottles of anycubic eco-resin

Anyone tried their hand at eco-resin printed miniatures?

Any tips and tricks to share? settings?

翻譯年糕

Hello to all and a Happy new year!

I live in Athens, Greece. On November 27 2019 I purchased an Anycubic Photon printer along with 500ml of resin from the official Anycubic website.

I paid the full amount of $273.99 with my credit card and got the confirmation that it will be delivered in 3-6 work days from their warehouse in Germany through a courier service DHL/UPS/FEDex.

Weeks past by and all I received was just the resin with no Printer to be found. The tracking number indicated that the package was supposedly in Greece waiting to be delivered by DHL.

After multiple contacts with both DHL and Anycubic, DHL sent me an official stateent that the package cannot be found, that it is NOT going to be delivered to me and that I should turn to the sender for claim.

I sent this to the official Anycubic support email, but they are not helping at all. First they insisted that the package will be delivered. Even after I send them the DHL statement, they still send me automated messages saying not to worry because the package will be delivered.

Now they do not even answer my emails.

I demand to either receive a full refund or just resend the printer!

I cannot understand how a "serious" company treat its paying customers with such neglect!!!

Can anyone offer any advice or help on my issue?

Thank you and Happy new year to all!

翻譯年糕

Hey Photon users, just a quick question about breather/drainage ports for cylindrical parts. I have an egg shaped item I want to print but I understand the parts shape will case suction issues against the PEI sheet. I can put some breather holes/ports in the part but was wondering:
What is the best orientation, along the x or y at the first available point on the internal void or just along the z wherever I can fit it?;
Is 2mm big enough or should I go larger or have multiple ports?
Thanks in advance and look forward to your advice.

翻譯年糕

Team, a little help.

I can print figures just fine, keep the detail in fur coats and finger tips but I CANNOT for the life of me get consistent, acceptable results with bases.

What am I doing wrong? Here is the latest attempt settings and supports. The only ones that printed were the front two. The back left was 80% intact and the rest didn’t print at all.

I assumed a suction problem before this print but at this point I just have no idea.

Edit; photon. Anycubic translucent green.

翻譯年糕

My third successful print, thanks to all the hints and tips I've got from here. Cheers guys

翻譯年糕

I recently got an Anycubic Photon and this is my latest batch. I am using Anycubic’s white resin, I set exposure for the bottom at 60 and exposure for the rest at 10. I tried leveling it twice before printing. Does anyone have any tips to help prevent more partial prints? I took an individual picture of the crossbow Goblin to show that the support for the back part of the crossbow did not print.

翻譯年糕

Let me preface this with that Im really new at 3D Printing. I picked up a Photon of their site during their sale. That said I recieved a "Fauxton". I've been doing research and its apparently a Photon with Photon S guts.
Long Story Short. My prints keep failing after releveling multiple times and trying different resins ( Anycubic red and Green) could it be a problem with cure times being to short since the guts are different then a stock Photon? It's been frustrating me for a few weeks. Any help would be appreciated.

翻譯年糕