Anycubic Photon Printer Owners 造訪社團 » TIP

原文網址 Mike Nye
2019-10-31 11:06:09

Hello new friends,

I've recently taken delivery of a shiny new Photon printer. Last night I set the printer up, thoroughly cleaned everything with IPA, levelled my build plate (paper method), filled with the "Eco Resin" that was included with the unit and attempted to print the test print on the included USB thumb drive.

As you can see from the image, the print failed. :(

After some googling and reading ( https://l3d.ie/2018/06/29/dlp-3d-printing-troubleshooting/ + this facebook group), I think the culprit is exposure time too low. I realise now I should've opened the test print in ChiTuBox or Photon Slicer and configured with different exposure settings to suit the "Eco Resin" that was supplied with the unit, instead of trusting the defaults...

Is this likely the only issue? Being a first timer I'm not sure...

I will consult the big resin settings spreadsheet, and possibly download and try this: https://github.com/altLab/photon-resin-calibration

Any other tips would be greatly appreciated.

Thanks!

Kind regards,

Mike Nye

翻譯年糕

Elle Heilig
2019-10-31 11:11:59

Mike Nye
2019-10-31 11:15:52

Elle Heilig
2019-10-31 11:16:58

Elle Heilig
2019-10-31 11:17:24

Mike Nye
2019-10-31 11:18:09

Elle Heilig
2019-10-31 11:21:29

Steven Howland
2019-10-31 11:30:43

Mike Nye
2019-10-31 11:31:13

John Chrapkowski
2019-10-31 11:32:33

Steven Howland
2019-10-31 11:33:18

Elle Heilig
2019-10-31 11:34:05

Mike Nye
2019-10-31 11:34:34

Mike Nye
2019-10-31 11:34:59

Ben Zeeman
2019-10-31 21:41:20

原文網址 Mike Fair
2019-10-31 00:57:03

First prime. Came out a bit “powdery” any tips? Looks fine with the naked eye though so I’ll continue with paint. Still learning supports. Any good resources for learning the best settings?

翻譯年糕

Joel Mendoza
2019-10-31 00:58:58

Teek Cooper
2019-10-31 00:59:28

Mike Fair
2019-10-31 00:59:58

Jon Vogel
2019-10-31 00:59:58

Mike Fair
2019-10-31 01:00:47

Rick Hanson
2019-10-31 01:01:43

Mike Fair
2019-10-31 01:02:53

Jon Vogel
2019-10-31 01:03:06

Alex Crisp
2019-10-31 01:03:49

Adam Carey
2019-10-31 01:04:38

Shawn Atlas
2019-10-31 01:11:06

Rob Bowles
2019-10-31 01:26:17

Andrew Stuber
2019-10-31 01:28:35

Jesse Ferguson
2019-10-31 01:28:45

Mike Fair
2019-10-31 01:30:16

Mike Fair
2019-10-31 01:30:38

Jesse Ferguson
2019-10-31 01:31:22

Ric Watts
2019-10-31 01:51:40

Olivia Couture
2019-10-31 02:15:08

Arnaud Rousseau
2019-10-31 02:21:05

Jez Clark
2019-10-31 02:21:30

Laurence Camley
2019-10-31 02:58:44

Evan Miller
2019-10-31 03:52:28

Ben Cox
2019-10-31 04:32:44

Mike Fair
2019-10-31 04:47:25

Francesco Peeters
2019-10-31 05:52:48

Andrew Conway
2019-10-31 06:47:47

Seona van der Pol
2019-10-31 09:37:26

Ivan Adhi R
2019-10-31 10:01:15

Lester Rea
2019-10-31 12:38:29

Chris Thaeler
2019-10-31 13:59:25

Luke Mason
2019-10-31 16:19:56

Chad Elstad
2019-10-31 21:13:02

Mike Fair
2019-10-31 21:24:22

Chris Thaeler
2019-10-31 23:02:26

Charles Rieken
2019-11-01 06:28:06

原文網址 Roque Gallas Junior
2019-10-30 20:16:03

Hi guys.
I Having this problem in one of two Photon S.
The program is fine because I change to the other printer a d it's run well.
I updated the firmware and nothing happened. Yes, I change the extension too.
Today I will disassemble it to check the cable.

Any other tips??

翻譯年糕

Darren Juniper
2019-10-30 20:18:13

Roque Gallas Junior
2019-10-31 19:33:18

原文網址 Pierre Dahlgren
2019-10-30 16:05:21

Soon be Photon S owner here and first time printer (waiting for delivery of the printer now).

Looking for any tips you lovely people have in regards to cleaning your prints.

Im looking to get good results with as little work/mess as possible, dont mind spending some money buying an ultrasonic cleaner or what ever I might need.

How do you guys do it? Two stage IPA clean? Ultrasonic cleaner with IPA? Ultrasonic cleaner with detergent? All of the above or none of them?

Greatly appreciate any tips you guys might have!

翻譯年糕

Lee Baxter
2019-10-30 16:07:29

原文網址 Benny Woolley
2019-10-30 08:11:56

Edit: Updated to 4.2.18 and now the entire screen is just flashing lines.

Orogonal.post: Is a flickering screen (some of the time), caused by Firmware or LCD? :(

Original Photon is having intermittent issues.
I see no dead pixels on a screen test.

Seems to be the actual machine just decides whether it desires to print something properly or not.
Tried multiple memory sticks, old and new files.

Turn on. Pick print:

Print either strobes horrendously, or is absolutely fine.

Stopping any file and starting another means it may just refuse to understand the next file and stall at 0% without loading the STL

Printing a file perfectly, it's a lucky dip as to the next one works or not.

翻譯年糕

Mike Fair
2019-10-30 08:18:19

Benny Woolley
2019-10-30 08:19:02

Mike Fair
2019-10-30 08:20:14

Benny Woolley
2019-10-30 08:20:53

Tiernan Messmer
2019-10-30 08:32:41

Benny Woolley
2019-10-30 08:33:34

Mark Rhodes
2019-10-30 08:34:39

Tiernan Messmer
2019-10-30 08:34:39

Benny Woolley
2019-10-30 08:39:53

Tiernan Messmer
2019-10-30 08:43:22

Benny Woolley
2019-10-30 09:44:18

Tiernan Messmer
2019-10-30 09:45:00

Benny Woolley
2019-10-30 09:45:45

Patrick Stark
2019-10-30 10:05:41

Benny Woolley
2019-10-30 10:30:08

César Fernández
2019-10-30 14:46:32

César Fernández
2019-10-30 14:48:15

Budiarta Komang
2019-10-30 15:31:06

Péter Farsang
2019-10-30 15:40:57

César Fernández
2019-10-30 16:52:18

Benny Woolley
2019-10-30 23:26:52

Benny Woolley
2019-10-30 23:28:49

Benny Woolley
2019-10-30 23:44:40

原文網址 Choy Wei De
2019-10-30 02:31:37

So with the mainboard on photon, is there a reason to choose faux photon over photon - S. Other than the price?

I’m consider skipping anycubic and jump straight to elegoo mars.

But I’m not using multiple different brands of printer yet, I only intend to buy 1. Does the proprietary file format affects me?

翻譯年糕

Sen Kun
2019-10-30 02:36:20

Jarrod Smith
2019-10-30 03:42:18

Choy Wei De
2019-10-30 13:11:32

Choy Wei De
2019-10-31 18:55:11

Jarrod Smith
2019-10-31 22:45:28

原文網址 Evan Boone
2019-10-28 03:48:04

So Chitubox doesnt seem to like this file. notice the hand, boot tips and inner eye sockets of the shoulder and knee skulls. there is geometry there but i think the darker area means the faces are reversed? either way it wont let me attack supports to certain parts and ive tried fixing via meshmixer but no luck. it either deletes geometry or adds weird artifacts and causes loss of detail. any advice from the hivemind?

翻譯年糕

Chayanin Somton
2019-10-28 03:50:20

Tom Betts
2019-10-28 04:00:11

Stefan Giudici
2019-10-28 07:24:56

Tero Konttila
2019-10-28 19:10:11

Gabe Snooks
2019-10-28 23:38:37

Stefan Giudici
2019-10-29 01:03:21

Gonçalo Osório
2019-10-29 02:22:59

Gabe Snooks
2019-10-29 03:03:18

Stefan Giudici
2019-10-29 03:22:27

Gabe Snooks
2019-10-29 04:19:43

原文網址 Will Cole
2019-10-27 16:56:32

Apart from printing Yoda's, Benchy's and other models, I was wondering if anyone out there uses their Photon for creating more unusual, or even commercial products?

I appreciate that unlike the FDM printers with multiple filament types, the resins are a little more restrictive, but am sure there still some interesting alternative uses for the output from these machines.

翻譯年糕

Ben Johnston
2019-10-27 17:07:10

Ben Johnston
2019-10-27 17:08:13

Ben Johnston
2019-10-27 17:10:17

Carlos Villamar
2019-10-27 17:10:54

Ben Johnston
2019-10-27 17:14:03

Christopher Ashworth
2019-10-27 17:25:25

Thomas Kurtz III
2019-10-27 18:01:40

Jonathan Head
2019-10-27 18:09:38

Marc de Hoogh
2019-10-27 19:18:30

Joe Eckert
2019-10-27 20:00:56

Will Cole
2019-10-27 20:17:29

Joshua Alexander Gilpin
2019-10-27 23:41:17

Dave Booche
2019-10-27 23:42:41

Dustin Oliverius
2019-10-27 23:55:44

Tim Moulton
2019-10-28 00:51:36

Andrew Sternglass
2019-10-28 02:39:44

Mark Pofigster Ewing
2019-10-29 07:10:34

原文網址 Johannes Kerry
2019-10-27 03:20:56

Hi Guys,

First I must say, I am realy impressed by the niche work you showing here, there're lots of pices of great art your presenting!

I'm using my printer since about 10 month, espacially for train parts in gauge 1 (1-32) but also try to do some funwork and figurines for my 6 year old daughter for collectibles. Its magic, you but a file in for her and it is comming out in volume!!

I have a question, I m looking for a stronger and more resistent UV resin, because the standart stuff is very brittel and fragile, do you have any tips for me?

Has anyone used Siraya Tech Blue for with the Anycybic Photon?

Thx in advence, and sorry for my bad english, german and french are a lot easyer for me...

翻譯年糕

Moritz Moe
2019-10-27 03:57:01

Johannes Kerry
2019-10-27 03:58:51

Evan Brand
2019-10-27 04:11:00

Johannes Kerry
2019-10-27 06:59:42

原文網址 Aaron Troxler
2019-10-26 09:44:36

I'm stumped. I keep getting this mass on the build plate side of my print. It's like its curing just that area the whole way up. But I did a dry run with paper and did not see anything that would have made this cure like this. I've tried 3 different d20 files. Please help. As you can see the rest of the print comes out flawlessly.

Also I've moved this to multiple locations on the build plate with the same results. I just dont understand.

Monocure rapid 3D clear

翻譯年糕