Anycubic Photon Printer Owners 造訪社團 » TIP

Hey Guy´s! I recently had the problem that my Photon would just stop mid print or reset even when i isnt done yet. So I figured that it might be a problem with the usb stick so I bought a new one. 32gb Kingston. When I plug it in and try to power up the printer it does nothing. If I let him boot up propperly and insert the USB stick than the touch controlles wont work anylonger. Its really frustrating. Any Idea what could cause that? Allready changed it to FAT32 if your wondering. Tips would be appreciated

翻譯年糕

Question about Elegoo resin and exposure times........

The resin on the bottle says "Standard", but the title in Amazon says "Rapid".

In the google docs spreadsheet, there are multiple options for Elegoo Grey "Rapid" and one for Elegoo Grey "Standard" but the exposure times differ.

Which one from the spreadsheet would match up with this Elegoo Grey from Amazon?

翻譯年糕

Just completed my first (successful) print and am extremely happy with the results. However I'd like more detailed / sharper edges with future prints. Any tips on how? (Would it just be lessening exposure time / printing on an angle?) Thanks.

翻譯年糕

Hello all! I just got my Anycubic Photon printer last night. I'm 100% new to 3D printing (I'm primarily an artist that creates 3d models and illustration but I've always wanted to have my models printed physically.) I have TWO Questions, with images provided.

Firstly, I printed a tiny benchy as a test of the Printer.
The print went well for most of the model but towards the end, Benchy fell off the print bed for some reason. I found it floating in the resin vat.
Could this be due to a leveling issue, or perhaps an exposure duration issue? Or a mix of both? Any advice in identifying the issues when it comes to learning the mysterious process of printing as a newbie to all this?
I believe the settings in the file were as follows

Layer Thickness: 0.05
Exposure time: 10.5
Off Time: 1
Bottom Exposure Time: 80
Bottom Layers: 8

- - - -

Secondly,
I want to print the model I made of one of my characters. He's definitely more complex than a basic Benchy Boat, and I used the provided Slicer software to auto-generate supports. My question for this model would be:
1. Does it need supports added at the tip of the braid and sidebangs? Or will those (ideally) cure to the printer bed and form as it rises?
2. Would the settings shown in the image be adequate exposure and layer thickness time for this type of a model?

Sorry for all the noob questions. But I appreciate any input, as well as any helpful links and resources so I can do some reading on my own as well.
Thank you! :)

大家好! 我昨晚剛拿到了我的任何立方體光子印表機. 我對3 d列印是100 %的新手(我主要是一個製作3 d模型和插圖的藝術家, 但我一直想要把我的模特列印出來.)我有兩個問題, 提供了影象 "我想讓我們知道,

首先, 我列印了一個小小的基準作為印表機的測試.
大多數模型的印刷品都很好, 但最終, 基準因某種原因從印刷床上掉下來. 我發現它漂浮在樹脂增值稅.
這可能是因為一個平穩的問題, 還是曝光時間問題? 還是兩者混合? 當學習作為新手印刷的神秘過程時, 有甚麼建議來識別問題嗎?
我相信檔案中的設定如下

層厚度: 0.05
曝光時間: 10.5
休息時間: 1
底部曝光時間: 80
底層: 8

- - - -

第二,
我想列印我用我的一個角色製作的模型. 他絕對比基本的基準船複雜, 我使用了提供的切片軟體自動生成支援. 我對這個模型的問題是:
1., 它是否需要在braid and sidebang頂端新增支援嗎? 或者那些(理想)會治癒印表機床, 隨著印表機上升時形成?
2. 影象中顯示的設定對於這類模型來說是否足夠曝光和層厚度時間?

抱歉所有的新手問題. 但我感謝任何投入, 以及任何有用的連結和資源, 這樣我也可以自己閱讀.
謝謝! 你知道嗎?

· 查看原文 · 為此翻譯評分

Anyone got advice/settings for Anycubic Translucent Yellow?

I've printed multiple other colours with no problems with this resin is causing me a headache. I'm not worried about clarity as it will be primed and painted.

翻譯年糕

What’s a good airbrush kit for painting models ? Total beginner , just starting to learn! Any tips ? I Want a good one though ? ?

翻譯年糕

MONOCURE RESINAWAY

I just had cause to try the Monocure™ Resinaway.

It is the bomb. I would not expect less for my money in a purpose mixed resin cleaner.

Bearing in mind the cost of the wash, I used it very sparingly in the tray to get the last of the liquid resin from the build tray. I lightly agitated the tray for ten to fifteen seconds, and watched the remaining resin release from the FEP. When I tipped the resin from the tray, it sheeted off, leaving almost nothing to clean with a soft cloth.
I used a small amount to clean the metal filter I bought for returning unused resin to the container, and the rubber funnel the filter rests in. Both were cleared without residue, which I am noticing with the IPA (I'm using 100%). I plan on offering 3D printing as a service from home, so it might be worth the cost of a purpose mixed cleaner for quick clean up between jobs. I will retry the cleaning with a similar amount of IPA ,gauge the difference. and report it in this thread. I have no affiliation with Monocure, and wasn't paid for my view on it. To be fair, it was a free sample that arrived with a largish order of resin, which was a nice surprise.
翻譯年糕

any tips for replacing the glass on the print bed? mines cracked or where to buy one ?

翻譯年糕

Hello everyone! As a designer, artist and overall tinkerer, I always found 3D printing fascinating but daunting while also frowning at the finish of FDM printers (which are typically the most affordable and wide-spread). However after seeing Daniel Feeney 's true-scale Iron Warriors (big miniature nerd here) and consequently discovering the Photon I started educating myself in LCD-SLA printing and 3D printing in general.

After dealing with numerous materials, sculpting and replication techniques, something like the Photon is like a creator's wet dream.

That being said, while *very* affordable, especially with the current deal, I found out about it at a time where the wallet is a bit dry, ahah! I was wondering, can someone tell me how often does Anycubic have this sort of promotions? And any other tips or considerations when getting into the Photon or this sort of 3D printing?

Thank you

翻譯年糕

Hey photonsters, I’ve got a tip to try. I was feeling too cheap to pay for the twin rail upgrade, so while I was swapping my LCD tonight I thought I’d try a free upgrade with some spare parts I had lying around. I tapped a hole (Make sure it’s a tight fit) through the case lip at the top into the top of the z rail and ran an m3 screw through to anchor the top of the z rail to the case. It made for a DRAMATIC improvement in the rigidity of the z rail. Test prints will have to wait till tomorrow night since I still need to swap my fep as part of this maintenance cycle and it’s late, but at least it’s some food for thought for people!

P.s. I was expecting to have to notch the lid for it to be able to close and somehow I got lucky and it worked out not needing it! Mileage may vary.

翻譯年糕