Anycubic Photon Printer Owners 造訪社團 » g code

Another newbie question. And looking back through previous posts, this hasn't been answered completely so I'm a bit baffled.

Brand new printer and I plucked up the courage to try the test lattice print. Levelled fine, did the paper routine, pressed Z=0 and was asked if I wanted to continue. Pressed Yes but didn't get a beeped acknowledgement (Manual said to press OK but that wasn't an option).

Happy with that, I raised the Z axis to reinsert the resin vat, added resin and clicked on print. The Z did not move down into the vat to start printing but began where the build plate currently was. The build plate was so high out of the vat that I could see the shadow of the first base layer in the vat.

I've stopped the print and restarted with the build plate moved down into the vat so I'll see if there is any success but should I have to move the plate back down or should the printer move it to Z=0 at the start of the print ? Have I missed a step of prep ? As the file was on the USB, I assume that the GCODE has all the relevant preparation lines.

Thanks and looking forward to hearing from the

experienced so I can find out what the heck is happening :)

翻譯年糕

I am having some difficulty and could use some guidance. I just got my photon setup and am trying to run the resin cal from the github group.

When I try to execute the test mode gcode, I get a M-400 memory error. Same for the print mode gcode.

I can run the 50u 2-20 sec photon file, but it is failing. The base layers come out fine, but is blank after that. There is something stuck to the fep, but not much and not legible.

I am using a bottle of Anycubic basig grey that was opened about 6 months ago, it was tightly capped, but probably settled some. I have previously used this bottle of resin on a Wanhao D7+ and got great prints @25u with 65s base and 7.25s layers after that.

Is there something that I am missing? I've tried with a few different sandisk thumb drives, they get a different m- error and will not work. I am having slightly better luck with a thumb drive that looks identical to the orig for the photon, but came with the D7 plus.

翻譯年糕

2 questions..
Can you edit G-Code Script in Chituwhateveritiscalled like you can in Formware3D Slicer?

Does anyone know the GCode Script to disable the fan on the Anycubic Photon?

翻譯年糕

So I'm getting random resets trying to print the v2 heater.

I've re-sliced it a few times and the .photon file seems to be ok. It will reset at a random point during printing.

I'm currently printing from a lexar micro-sd card purchased at walmart, inserted into a sd-to-usd adapter that is wired directly to pin headers i added to the motherboard.

Previously, I was getting the usb disconnect error, with about 3 different usb sticks.

It's a blue window unit and came with the suspect power supply. I have since hooked it up to a 400w 12v supply from a proliant server, so i am fairly confident that there is no shortage of clean power. I've run the reset to defaults gcode a few times and re-zeroed.

Firmware 4.2.14 is loaded. Should i try a different version of the firmware?

Anything else i should look into?

翻譯年糕

Chitubox Gcode settings

Hello Chitubox users,
I'm experimenting around with the Gcode tab and am wondering if anyone has ever been playing around with different lift acceleration using the M201 command? I'd love to know if there are constraints as to what commands can be used and what can't. Coming from FDM printing it would open up a lot of familiar territory for me. Thank you all!

翻譯年糕

Just a quick question I'm curious about folks. How many of you have used a resin mix gCode before? I seem to have pointed people who were unaware in that direction 3-4 times just this week. I was wondering whether an integrated resin mix button may be a useful feature for the custom firmware.

翻譯年糕

I decided to roll back to v4.2.14 firmware. Not only could I not see any AA improvement I started getting a lot of failures where I had none before. Also the Resin Mixer gcode did not count down like before, just seemed kind of odd to me. Everything is back to normal now. Maybe AnyCubics next attempt will fair better.

翻譯年糕

Hi everybody ! I need your help my photon ( original ) won't print anymore ? ? ? brand new photon received last week and everything was ok untill yesterday ... so here is the issue : the photon start to print the first layer and once printed it try to peel it off like usual ...
the printer start to lift the build plate then after less than 1s a "bip" and z axis stop moving( the motor was not able to peel it ) and print continue w/ no motor runing !!! even after canceling the failled print the motor won't move anymore untill reboot !!!! after reboot motor work again and i can lift it up to peel the first layer ... and restart cleaning everything ...

some extra infos : Photon firmware v4.2.17 used the fanoff.gcode some days ago Slice made w/ last version of ANYCUBIC Photon Slice and ChiTuBox ( tested w/ 2 computers ) fat32 formated sandisk usb stick ( same issue w/ photon usb stick ) anycubic green @ .05 thickness, 8 exp, bottom exp 50, 8 bottom layers full clean ( vat + plate ) after each failed print level is ok all print were perfect before yesterday ( I also releveled after the issue appears ) tested a print w/o the vat ( no resin ) it's running ok
hope you can help me ... 翻譯年糕

Did notice a change with the latest AA firmware upgrade...

I have a .gcode script that I use to mix the resin in the VAT. When I ran it with the old firmware it would give a % complete. When I run with the new firmware, it starts and moves to 1% but never changes...

翻譯年糕

First print (test cube) failed :)
Used anycubic green on stock settings, didn't stick to plate. I had watched a video on a guy levelling (same as in the book) and then also followed instruction book so think i did that correctly!

Currently I'm assuming that the stock exposure times are too low. Didn't feel confident enough to do he exposure test and change the gcode (before everyone shouts EXPOSURE TEST!)

So - tonight I clean the build plate and strain out and back in the resin and go again either with higher exposure settings or I get some balls and run the exposure test :)
- Did anyone else find the stock settings to be to low for anycubic green (I'm in cold England :) )

翻譯年糕