Anycubic Photon Printer Owners 造訪社團 » 用戶發文

Try rocketpiggames

https://www.patreon.com/rocketpiggames

Yeah they have some pretty good stuff! And another way to describe what in looking for is like model kits

Highly recommend mini monster mayhem for their dragons!

Photon! Photon S is made from Plastic rather than Metal, got a smaller printvolume but got some Linear rails. But you can get a Linear rail Kit for the Photon on ebay for under 100 bucks so buy that and Save 100 bucks and get the higher quality maschine (edit: The S got a slightly bigger printvolume, I mixed that up)

From what I’ve gathered, not worth it.

cool ill just do a photon, thats what i have now but it broke so im looking for a new one so at least ill have an extra print bed and vat

Faster prints, higher build volume and more stable Z axis are the main differences. Then make your choice

Photon S has a larger print volume and a better UV light source

i have the s and i like it

Yeah you need to stop giving advice. The photon s has a stronger LED and dual rail plus a slightly larger print area. The plastic casing I really wouldn't care because I really don't plan on dropping the thing.

Óttar Freyr Einarsson that's exactly what I was about to type.

I’m thinking I would buy 2 photons.... ?

Óttar Freyr Einarsson well sorry that I mixed that up but If I pay for something I prefer to have a better build quality and I do get that with the standard photon. And I never had the problem with the Screen being to "weak" so I don´t see the point of going for the S

The led under the screen is stronger. Which means shorter exposure times = faster prints

Photon S has larger buid volume, prints faster, metal chases doesnt matter much, S is sturdy enough.

If it's a budget issue, or if you already have an OG Photon then great get another one, otherwise the Photon S wins every time.

Dual Z axis makes a huge different in print quality. I have had the Mars (with single Z axis) and now have 2 Photon S's. It really does make a difference.

I have an S. It’s a good machine. Stronger UV light. Better rails. The plastic case is Not an issue.

The main problem with the S is that they changed out the motherboard so it’s not an opensource Chitu board.

Wayne Rogers yeah but I doubt he can find original Photon with Chituboard. He will get Fauxton and Photon S > Fauxton.

True. The original Chitu Photon is gone.

In that case, I think the S is the better machine. Except of course an Epax. That’s the best entry level resin printer right now

? What happened here? Left the group because of wrong advice?

George Bulte looks that way, poor guy. It must be tough being so emo.

Kevin Piatz Jealousy?

George Bulte not really sure what you mean.

Kevin Piatz Made the wrong decision? with buying a normal Photon?

BTW, I would advice to buy a Phrozen Sonic mini.

Maybe he did, I don't know. I own three Photon S printers.

i mean itll just print a little taller right the actual size of the bed doesnt change?

ive been printing for a while mine just broke and i need to get a new one

Upgrade firmware on new Photon or S (if it hasn't been done already from factory) and Chitubox will work fine. They fixed this months ago.

Jacob Venteicher yeah, thats right

Derek Riddle agreed. Big difference.

I have a very lightly used Photon S $300 shipped

Don't they use the same lcd screen I'm curious because the one on my photon went out

same

For a little more than a Photon S, I have a Photon and Sonic Mini. What are the exposure times per layer are you guys using for the Photon S at .05? My Photon is about 7-9 seconds, the Sonic Mini is about 2.4-2.6 seconds.

Chris Wildy really depends on the resin you’re using...

Same, but different. It has a different connector, but there's an adapter

Nipuna Gunarathne even the newer photons?

Chris Wildy 4-6 typically for me.

for 200usd no, get the plain photon, but if the difference is less than 100usd like when I got my S it had a difference of 50usd then get the S

I got the photon s for less than 300 so yes it’s clearly good

It's faster and less z wobble that you would probably spend to upgrade anyways

what about the difference of the time settings compared to the traditional one. I didn't get this rate, does someone get it

The same thing happened to me. I was told I should have bought the replacement as one part. I had tried to scrape it off but scratched the plate underneath. I ended up having a replacement part cut to size. Good luck

James Lockwood what replacment part?