Ok guys, I am getting so frustrated! I got my Anycubic Photon last Wednesday. I was able to print the test file, and one other file as well. Then I started having problems. it looks like the resin is sticking to the film on the bottom of the resin vat. you can actually hear the piece pulling off of the plate. I am using the included green resin.
I have leveled using the instructions in the user manual, I have leveled using the other method where you have the empty resin vat in.
I have modified the exposure time for the bottom layers and changed the numbers of the bottom layers. Everywhere from 120sec/10 layers, down to 60sec/8 layers.
I have pulled the vat and cleaned it, i even changed the film in the vat because it looked the tiniest bit scratched.
I honestly have no idea what do do and am about ready to take the thing out back and beat it with a bat office style. Do you have any other suggestions?
翻譯年糕
Jarrod Smith
2019-08-27 08:19:23
Michael Danner
2019-08-27 08:19:39
Travis K. Jansen
2019-08-27 08:30:36
Victor Organek
2019-08-27 08:32:59
Steve Nottingham
2019-08-27 08:41:10
Tiffany Anne Badami
2019-08-27 09:06:35
Travis K. Jansen
2019-08-27 09:14:28
Travis K. Jansen
2019-08-27 09:15:41
Alexandria Wagner
2019-08-27 09:17:06
Travis K. Jansen
2019-08-27 09:25:15
Clifford Schwankner
2019-08-27 09:29:42
Tiffany Anne Badami
2019-08-27 10:15:36
Travis K. Jansen
2019-08-27 10:41:20
Valentine Catacarté
2019-08-27 10:53:49
Jason DeGonia
2019-08-27 11:40:26
Johan Oettinger
2019-08-27 13:50:29
Johan Oettinger
2019-08-27 13:51:40
Michael Earley
2019-08-27 18:31:14
James O'Keane
2019-08-27 20:21:21
Mike Fatchett
2019-08-27 22:39:37
GaryAnji Smith-Lambeth
2019-08-27 22:58:07
Arnie Locsin
2019-08-28 00:14:06
