Anycubic Photon Printer Owners 造訪社團 » 用戶發文

Same problem

Acetone

Would regular water work? Dunk them in a tupper box and leave the parts for a while?

Wouldn't that just destroy the parts?

Fernando Valenzuela nope. It's amazing at cleaning but you need to be quick. It doesn't need a long soak.

I use Mr. Clean in my ultrasonic cleaner and have no complaints.

Mean Green is what I use.

How long do you leave the parts submerged for?

Simple green works like a charm. You have to scrub with a brush unless you have an ultra sonic.

I dont have a cleaner, but I do have plenty of SG. How long would I have to keep the parts submerged to get results?

i leave them in there for 15 mins and then take a tooth brush and scrub the parts. Then rinse them in clean warm water.

Real question: could you use vodka? :)

That is legit something I was pondering myself too

Methylated spirits works well. You can get it in most DIY stores

Filter the used ipa, then reuse..repeat indefinetly. i have been printing for two years and am still using the first batch of ipa..

Mean Green > Simple Green

And how do you filter IPA

Fernando Valenzuela before i used water but no is good....pots white in the printer

Cure the used stuff, run it through a paint filter, dump the filter.

I use a standard coffeefilter

Dominik Honke if i use coffeefilter it clog very fast, and no IPA is running through

Mario Hippmann Then use a rougher mesh before that...

I have been using Mean Green since I first bought my Anycubic Photon. I have found this works amazingly well.

If you're in the US Lowe's carries it. I used it as well

If in the US the 99 cent only store csrries gallongs of LAs Totally Awesome for 4 bucks. Works great. Also works fantastic for stripping paint of minis.

You can use vodka, I had some old bottles in my garage from last year that were marshmallow flavor ? work like a charm

Denatured alcohol from your local hardware store/paint store...or else acetone

Filter smaller batches and repeat until all is done.

Any special instructions with using them? What do you store them in?

Joseph G Martinez did they come come out scented?

Acetone, works extremely well.

Zachary Shuford go with everclear

Yeah, the jelly will blind anything fast, even a paint strainer mesh. Good luck

Scott Pavlich they had gallons of it at Loews

They actually did smell like marshmallows

Denatured alcohol from the hardware store

I pee on mine!

I had a bottle of "technical alcohol", basically a cleaning substance for mechanical parts with 70% alcohol, works like a charm

Undiluted anti-freeze is often 95%+ ethanol.

I use paper towel. Catches a lot of the gunk, but still flows well. Then run through a coffee filter if it needs.

Just remember to lid your IPA, or it'll all evaporate.

for real though, acetone. recently made the switch due to ipa shortage. im never going back. its gaster cleaner and easier.