Anycubic Photon Printer Owners 造訪社團

My Photon's LCD screen came off as I was removing the VAT ☹️
What are my options? Considering China is mostly closed

翻譯年糕

Can we leave resin in the tray for days if we are continuously printing and adding more resin with each print? I am so blown away by the prints I'm getting, that I just keep feeding it USB files and it just keeps churning out perfect prints! Do I need to empty and refill the tank, or can I leave the resin there for 5, 6, 7 days? What would be the harm?

翻譯年糕

Hi Guys, this is going to be interesting.

So as you know I design a lot of scale parts for my RC helis - this means parts are exposed to vibration, elements, wind - the works.
So far for the small scale fittings I was doing prints on Anycubic Photon (Ameralabs and Siraya resins) and if something had more curviture or was bigger - Peopoly Moai.
FDM was used only for big parts. Now after finishing building my e3d tool changer I decided to optimized my Prusa MK3S for fine detail printing
- prints with ASA
- layer height of 0.05mm (most of my photon prints i do at 0.04 or 0.05)
- 0.15mm nozzle (so twice the diameter of Peopoly Moai laser, photon res is 0.047 by 0.047 but obviously this means aliasing)

I wanted to see how much detail I can get
And I do have to say - to a naked eye there is no loss of fidelity, even under a microscope the difference in detail is managable.

Prints have to be done with ABS or ASA (petg or pla may clog)
Benefits
- parts are lighter, the wire cutter on fdm was 3g vs 8g resin (ASA density is 1.09g/cm3 vs resin that is on 1.35,also can do very thing permiters i.e 0.45mm)
- parts are stronger

Drawback
- marginal loss of fidelity
- print times on average 3x of how long it would tool on photon with 12s exposure.

Oh, acetone smoothing on more organic parts - wow!
-

嗨, 夥計們, 這會很有趣.

所以正如你知道, 我為我的rc hellis設計了很多比例的部件-這意味著部分會暴露於振動, 元素, 風工作.
到目前為止, 對於小型配件, 我正在任何立方體光子(ameralabs和siraya樹脂)上做列印, 如果有更多的曲線或更大的- peopoly moai.
Fdm只用於大部分. 現在完成了我的e3d工具更換器後, 我決定優化我的prusa mk3s, 以獲取細節列印
-與asa列印
-層高度0.05 mm (我的大部分光子印在0.04或0.05)
- 0.15 mm噴嘴(所以是人氣鐳射的兩倍, 光子res是0.047 by 0.047, 但這顯然意味著異化)

我想看看我能得到多少細節
我不得不說對赤裸的眼睛來說, 沒有失去忠誠, 即使在顯微鏡下, 細節上的差異是可以解決的.

指紋必須用abs或asa完成(petg或pla may clog)
年, %
-零件更輕盈, fdm上的電線切割機為3克樹脂(asa密度為1.09克/ cm3與1.35, 也可以做非常適合permiters i). E 0.45 mm
-部分更強

倒退
-一點點失去忠誠
-平均列印時間為3倍, 在光子上使用12 s曝光工具的時間.

哦, 丙酮在更多有機部件上滑-哇!
-

· 查看原文 · 為此翻譯評分

well got bored while sitting at work, so decided to add some color to my bust I will be printing this weekend. gonna run it on my photon. let me know what you think. yes I know that doing colors in the photon is impossible, but at least It was fun to do

翻譯年糕

So what's the deal with this print failure? This is 0.03 height, 8 bottom layers, 60 bottom exp, 5.25 exp on a Photon S (Anycubic Grey). Bed has been level as I've printed several other things just fine, FEP is new (I had replace it two prints ago). I stopped the print so that's why the sword is clipped, but the cape is all wonky. (Keep in mind she is globby because I didn't bother to wash her off in IPA.) Something wrong with my supports (placed manually)? In Validator I had a handful of islands with less than 10 pixels off.

翻譯年糕

so have been having issues with my 1st printer all of a sudden..nothing has changed..i get random holes or really weird extra resin skin that isnt part of the models..

what type of thing would cause this? bad lcd screen? or something? i have a 2nd one and it's fine...same models, etc..nothing different....

im at my wits end on this one...only got it back in sept of last year...was doing great up until a few days ago...i replaced the fep...but made sure that they plastic film piece was off and it's all tight, etc....any help would be appreciated..

翻譯年糕

Hey guys new to the group and awaiting my photon and its my first resin printer and just wanted to see if i could get some tips and tricks you all use and abit of information really anything will help, thanks in advance!

翻譯年糕

Is there a nylon resin that works with the Photon and Photon S printers?

Or for that matter, what are some stronger resins we can use in these printers?

翻譯年糕

Little Scott Pilgrim print!

翻譯年糕