管理員
統計數據
原文網址 Birk Binnard 2019-05-27 04:51:36
Soooo bright!
This LED light is so bright I almost need sunglasses to look at it. But it works really well and will make it lots easier to check the quality of the critical first layer.
Thanks to John Wachowski for identifying the parts needed to complete this upgrade:
https://www.amazon.com/gp/product/B078Y6MFNB…
https://www.thingiverse.com/thing:2807099…
I printed the Thingiverse adapter and found it simply clips on the to end effector - the clips don't work all that well, but they do work well enough. The light has an adhesive strip that is supposed to hold it on to things like the adapter, but that didn't work well at all so I added a few dabs of hot glue.
For power I simply hooked the wires to the ones that power the heatsink fan. This means the light turns on as soon as the printer is on.
原文網址 Ricky Cheung 2019-05-23 20:11:35
Customer requested gold plated 12.9” iPad Pro protector stand is done ? https://maxvan1.verio.com/…/ipad…/iPadProProtectorStand.html
原文網址 La Latte 2019-05-11 15:53:58
分享-生活應用 白色也能很有質感 材質:Spidermaker PLA消光白 機器:ATOM2.0
Tsai Porridge 2019-05-11 19:51:21
這個圖很棒～可以提共圖檔來源嗎？
原文網址 Vincent Liu 2019-04-25 11:14:06
自行改的保溫罩，ABS列印中，已經印了25小時77%持續列印中，對比沒有保溫罩層裂的裝況消失了，但是底部翹曲的狀況還是在，需要繼續努力，另外提一下ATOM的官方保溫罩圖檔如果直接按圖施工，在做自動校正水平的時候會撞車，有興趣自行加裝的夥伴，要稍為留意一下。
James Lin 2019-04-25 11:19:07
進料馬達會超燙~
林似諭 2019-04-26 21:47:38
提供您參考…
Vincent Liu 2019-04-26 21:49:11
感恩，謝謝
原文網址 錢政宏 2019-04-24 10:18:08
[求救4/29更新] 參考了諸位的建議 設定了下列參數 流量100 溫度220 熱床100 速度10 底層速度5 風扇200 但仍然失敗了，難道一定要塗口紅膠嗎? (QAQ)
真的很不想在那片玻璃塗東西......
------------分隔線--------------------------------
各位先進早~
關於ABS這支料，大家噴頭和加熱平台都設定多少? 之前網路上查到 噴嘴 : 220-250°C 平台 : 95-110°C 但是仍然黏不住，所以上來詢問一下，感謝!!
PS : 我是ATOM 2.5 EX 然後，0.4噴頭，另外，關於噴頭熱度它的最高極限是多少啊?
Efun Lai 2019-04-24 10:25:08
Efun Lai 2019-04-24 10:26:16
去年的明燿測試料
錢政宏 2019-04-24 18:18:12
感謝，明天測試看看
Vincent Liu 2019-04-25 13:15:10
建議底板一定要貼耐熱貼紙,成功率比較高,溫度我開234,熱床貼高溫棉紙溫度100度,風扇60%流量100,如果您不想貼棉紙建議要加裙邊增加附著力
錢政宏 2019-04-29 13:46:09
仍舊失敗了........
李禮全 2019-05-01 09:24:28
思考一下距離吧。 噴頭的光敏有沒有在列印的時候作動呢？ 有的話表示噴頭打到物件。這樣底板有可能被打掉。 如果你一印就沒黏到就忽略我吧
錢政宏 2019-05-01 09:31:59
李禮全 是一印就脫離，我屈服了，等放假完用耐熱膠帶試試
林志鎰 2019-05-01 22:50:07
Abs需空間恆溫，收縮率很大，不然印到一定高度會自己跳起…
錢政宏 2019-05-01 22:50:50
林志鎰 即便塗口紅膠也會嗎？
林志鎰 2019-05-01 23:01:11
是的，抓不住，必須封箱，或使用改良的abs搭配指定的北極熊黏膠
チェン 幸せな 2019-05-02 21:30:56
ABS收縮量太大,單玻璃不塗膠抓不住的,口紅膠布或擦拭紙沾水很容易就去除了,去除完可以噴點酒精擦拭加速水份揮發,很容易的.
錢政宏 2019-05-02 21:41:58
了解！！！感謝
Cherub Shiao 2019-05-02 21:54:20
速度50還不錯。
劉柏辰 2019-05-02 23:37:56
因為我懶的塗口紅膠，我是用鹿頭牌撕不斷黏在平台。不過因為膠帶有厚度要重新教正Z軸。這個超黏即使是我沒做熱場變型了也是硬是給它黏上去，只要熱床沒有開很久也不太會脫膠（或是有時乾脆不開），至少我覺得比口紅膠好清，總之我的建議是要上膠及做熱場。
錢政宏 2019-05-03 09:05:34
感謝示範，下周再嘗試塗口紅膠，目前忙到沒時間處理他XD
原文網址 劉忻怡 2019-04-19 23:53:55
不好意思打擾
因為急用 缺料，想請問大家是否有ATOM白色的PLA線材可以賣。 地點：淡水/台北
謝謝！
Victor Chang 2019-04-20 00:00:20
它牌不要嗎？
ATOM 3D Printers 2019-04-20 00:02:22
請收私
原文網址 Adin Rimland 2019-04-18 10:31:34
Hey! seems the thermistors are pretty delicate. Is there a place to order them that's not all the way from Taiwan? thanks!
黃俊傑 2019-04-18 11:35:14
Try google 100K Ω thermistors to find out local shop or ebay
原文網址 Kevin Chen 2019-04-14 14:00:38
各位版友好,現在PETG線材越來越普及了。分享一篇介紹PETG的文章給大家參考,內容和以往大家搜尋PETG所找到的資料應該很不一樣!
原文網址 Jörg Johow 2019-04-13 01:02:27
I removed the board to inspect it. L1 is burned. What can I do? Replace it? Is it a diode? A resistor? Any help? Thx!!
Birk Binnard 2019-04-13 01:40:09
Looks like you had a short circuit. You'll need a new motherboard.
Jörg Johow 2019-04-13 01:41:31
A new board is surely an option. But I could also repair it. How much does a new board cost, where do I get it? Thx.
林志鎰 2019-04-13 01:53:08
Weld L1 holes on the board can be connected
Josh García 2019-04-13 02:44:11
I had the same problem
邢鳳言 2019-04-13 02:49:50
Search "MKS GEN V1.4" to find a board for replacement if you failed to fix it, Cost under $30 around.
Yinka Alade 2019-04-13 23:41:46
Write to Atom and they’ll sell you a new board. You can replace it with a different board that is compatible but you might have to change some options.
原文網址 Jörg Johow 2019-04-10 00:19:29
The display works with USB connected. When I unplug, it will turn off. Please see the video.
La Latte 2019-04-10 00:41:22
you can try to destroy the L1(Diode) in mainboard and make short circuit it.
Jörg Johow 2019-04-10 00:43:07
Okay? Thats an interesting workaround. Something seems to be broken here. Where do I find the diode?
Hugo Lopez Uria 2019-04-10 04:07:45
Do you have the power on? The printer is able to be turn on only with the 5v of the USB...
Hugo Lopez Uria 2019-04-10 04:09:45
I have detected another bug with last firmware as well, if i turn off the printer with the USB conected to the computer, It shuts off the computer too!
Jörg Johow 2019-04-10 15:05:06
When I turn on the printer (with mains connection) it kind of turns on but without the display. When I plug the USB the display comes on and the works. Where is this L1 diode?
討論主題
全不選 主題相關關鍵字
