ATOM 3D Printer Group 造訪社團

My Minifactory 好就好在，他們真的會幫你印出來 XD

求救文
想問各位先進，螢幕突然空白。
重開機也一樣，
然後整個無法操作是發生了什麼事情，
有什麼辦法做檢查查出問題點的嗎？

好久沒印，開機運動一下

2.5FX
剛剛試圖要清喉管，可能不小心碰到電路板，照片上面圈起來的地方就冒火花，然後就斷掉了，請問我現在應該怎麼辦？

Here is the Dyze Design optical filament run out sensor mount if anyone wants to use it for their printer. It can be printed without supports, but you can use one on the arch depending on what you're printing with or how much you care.

翻譯年糕

Stringtest3 Thanks to Yinka Alade for providing me some pointers on how to set my slicer to eliminate stringing. To test his values I made this test part based on the design for Cactus1 that I published a week ago. The STL file and more info about this part is here: https://www.thingiverse.com/thing:3699949 https://pinshape.com/items/53184-3d-printed-stringtest3 For this print I used Prusa-Slicer with the following settings: Retraction = 5 mm Retraction Speed = 100 mm.sec Nozzle Temperature - 190 First Layer Temperature = 210 Wipe Enabled I only print PLA so I have no idea what settings would work for other materials. But this test prints in only 7 minutes so it would be easy to use it to check the settings for other filament types. 翻譯年糕

遇到一個問題 底版無法加熱卡在27度上不去

不算難印，但還不錯玩的題材，紅色是不開支撐…也藉機研究了一下gap的設定，0.2mm算是一個極限的間距了…