ATOM 3D Printer Group 造訪社團

Fins2

STL file and more info is here:

https://www.thingiverse.com/thing:3260667

https://pinshape.com/items/48419-3d-printed-fins2

翻譯年糕

熟悉的表面紋路，硬體結構穩定的象徴。
還有，送料穩定、溫控穩定。
# ATOM3Lite
# 蘋果橘子

ATOM 2.5 FX 作品:小青蛙 切片:CURA 15.04 層厚:0.15 Z軸回抽抬起:0.4 速度:30 列印溫度:195 回抽速度:110 長度:6.5 雙噴頭切換回抽量:148

感覺，機器表現相當穩定，簡單好上手，滲出些許的絲，可能回抽距離再增加一點，最後小青蛙真可愛

atom 3 lite part13_1……浮雕版摩艾，預估比先前的多了6小時，整體來說滑輪版的表現也不會很差…可能我印比較慢的關係吧

代售全新atom 2/2.5 盔甲一組，意者私。 代售全新atom 2/2.5 盔甲一組，意者私。

Help needed.
I recently have problems when trying to dual color print.
I have designed a goblet in Fusion360 which I want to print in two colors.
I'm using Cura version 15.04.6, Dual extrusion switch amount is set to 120 mm as I was told it should be.
The problems are these:
File generated by cura itself move extruder 2 too much and as a result the first layer of the second color will not bind well to the bed unless I pause the print as it start and manually push part of the second filament back (via the extruder knob), however that recently has caused both filaments on both extruder to either grind and lose grip or to outright break.
This happens regardless to the file I try to print, as long as it is dual color print.
I tried to adjust the gcode for the model I created to fix the distance of both filaments but it return to the first problem where too much is pulled out.

Attached are both gcode files as well as STL of the model I wanted to print.
How can I solve this problem?
P.S
Printer is Atom 2.5 EX

翻譯年糕

這樣會太貪心嗎？ ?

# Atom3lite
# Atom
# 3dprinting
# 3dprinter
# 3dp
# 3lite
# 3D印表機
# 3D列印
# 摩托車
# caferacer
# motorcycle
# moto

30cm 的 Atom 3 Lite

小船戰記

# Atom3lite
# Atom
# 3dprinting
# 3dprinter
# 3dp
# 3lite
# 3D印表機
# 3D列印
# 小船