• COSPLAY 3D 建模
  • 3D列印服務
  • #maker+t=market
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » IPA

原文網址 Olivier Nicolas
2020-03-18 00:21:34

No ipa ? Use water washable resin No ipa ? Use water washable resin 翻譯年糕

Stuart Radmore
2020-03-18 00:23:00

Or use surgical spirit or ethanol all better options than water washable resin lol

Olivier Nicolas
2020-03-18 00:31:41

Stuart Radmore water washable resin rules.

Stuart Radmore
2020-03-18 00:40:18

Until you read the msds

Francois Lozach
2020-03-18 00:51:41

Well the thought I have about water washable resin... when you wash you piece on a water container... you got a lot of resin I cured in it... ipa evaporate if you want to cleanup the container... but water not ... or at least not so fast... then chemic als in water washable resin cannot be disposed in regular waste ... so what is the advantage? You cannot rincé your piece under water flow directly going into the sink thus you still need a container and you still need to remove most of the resin before letting evaporate the water...

Ettore Maria Bar
2020-03-18 01:10:19

I formulated my first water washable resin almost 7 years ago. That time my last of 3 sons was a toddler. I was thinking "God, this is a brilliant idea, no need to use alchool, users can wash parts directly into sink!". Then I took a look to him, at the formulation and I decided not to produce that resin.

Jim Nelson
2020-03-18 01:20:18

I use Mr. Clean in an ultrasonic. Works great!

Pete Kastner
2020-03-18 01:21:00

Ettore Maria Bar
2020-03-18 01:42:48

Read SDS of water washable resins to find out yourself.

Bob Snyder
2020-03-18 01:50:45

Or just use DNA. Works great.

Mark Wardle
2020-03-18 01:58:07

i would rather not print then use water washable resins. it never cleans you still need to use ipa on them to get them 100% clean. people tend to think water washable = safe. others will wash in there sinks under taps. other people will just throw the dirty water down the sink. not saying you and others in the group will. just saying that peeps will. hate the stuff. hence why the anycubic bio resin is no longer water washable due to the environmental impact that could happen with misuse.

Mack Whillz
2020-03-18 02:03:41

Ettore Maria Bar I formulated mine over 10 years ago. HA

Ettore Maria Bar
2020-03-18 02:22:00

Mack , nice, but what is your actual occupation? I run a company manufacturing resins with 40+ distributors worldwide.

Mack Whillz
2020-03-18 02:23:15

Ettore Maria Bar I work at McDonald's

Ettore Maria Bar
2020-03-18 02:26:32

Mack , makes sense.

Andreas Broager Lauritzen
2020-03-18 03:25:06

Ryan Cook
2020-03-18 07:55:44

You just cure it and strain it. The advantages are obvious. Less odor, less cost, less exposure to flammable compounds.

John Chrapkowski
2020-03-18 13:23:32

the filter doesn’t make it safe to put water down the drain

Olivier Nicolas
2020-03-18 22:08:56

i just clean in a water bath, put it under UV lamps, take my dirty water tanks to the city disposal as contaminated water.

Ryan Cook
2020-03-19 00:35:19

Who is putting anything down a drain? Water evaporates, too.

Rohan O'Rourke
2020-03-19 07:29:00

use methylated spirits. works as good if not better and in my experience is way cheaper than ipa.


原文網址 Kelly Sealey
2020-03-17 23:04:44

Donated one of my IPA bottles to a local teacher and one to my daughter's nursery. # flattenthecurve Donated one of my IPA bottles to a local teacher and one to my daughter's nursery. # flattenthecurve 翻譯年糕

Stuart Radmore
2020-03-17 23:33:43

If they have glycerol and hydrogen peroxide they can make hand sanitizer. The world health organisation did a post on how it's to be done

Kelly Sealey
2020-03-17 23:38:06

I was told IPA and aloe vera gel? Dunno, but when I offered it they seemed very keen, so must be able to use it :)

Tim Parks
2020-03-17 23:39:00

Nice. I’m inspired to do the same. I’ve got a gallon I can get rid of. I think that’s more important then anything I’d print.

Stuart Radmore
2020-03-17 23:43:57

This is the recipe if you want to make hand sanitiser with 1l of ipa you can probably make over 1.5l etc

Will Amnuai
2020-03-18 00:03:30

Joel Mendoza
2020-03-18 00:13:22

That’s nice of you. Are schools still open out there?

Andy Turtle Consiglio
2020-03-18 00:15:05

You're what's right with the world :) ?

Laurie Sinclair Muenchow
2020-03-18 00:42:37

Thank you.

罗西晟
2020-03-18 01:59:52

Kelly Sealey , that is nice of you.

Would do the same, but I clean with water and dasty (simple green lookalike stuff)

Here I just read a share on FB from someone working in a hospital near, that visitors are actually stealing desinfectans and gloves and such...
Good thing I don't catch people doing that... cause I'd be tempted to give that person a valid reason to have to stay at the hospital after such an act....

Eric Sainte
2020-03-18 03:57:54

Gave the surgical masks leftover from when my mother was still alive a few years ago (she had lung infection) to my neighbour's daughter who's an OR nurse... here in Belgium, thanks to the idiocy of our politicians, the order of masks never arrived due to suspicion of fraudulent actions on behalf of the producers, one of the health minister's party member being involved in it... and when no other European country will help, it's the chonese people who will help us by sending tons of masks in emergency. They even sent respiratory equipment and doctors in Italy to help !!! Kudos to them for that too !

Jonathon Michael Starwalt
2020-03-18 04:56:02

Voting day here in Illinois. Dropped off a box of gloves for the volunteers

Tim Parks
2020-03-19 07:39:40

I have another batch to make, but half of my gallon is all going to a church that delivers lunches to kids who are out of school and rely on school lunches for a meal. They are getting about 3,500 lunches out a week, and coming into contact with people in the process. They wear gloves, but have said it would be nice to have sanitizer.

This alcohol is doing way more good then just washing resin off of D&D models.


原文網址 Jim Appleby
2020-03-17 18:07:40

Recently got my new printer and although I am usually very careful I managed to spill resin on the window and did not wipe it off immediately! Now it has hardened and have tried to remove it with ipa and then I tried varsol with very limited success. Ideas?

最近買了我的新印表機, 雖然我通常很小心, 但還是把樹脂灑在窗戶上, 沒有立即擦掉! 現在它變得硬化, 並試圖與ipa一起刪除它, 然後我嘗試了varsol, 但成功非常有限. 想法?

· 查看原文 · 為此翻譯評分

Daniel Kelly
2020-03-17 18:09:27

Try a plastic blade to scrape it. I have a similar issue that occurs on my other printer a d the only way I've found to remove resin from a screen is with a blade, but a metal one will scratch up the screen.

Jim Appleby
2020-03-17 18:10:23

Daniel Kelly thanks, where would I get one of those?

Angelus Mew Ellis
2020-03-17 18:10:56

Jim Appleby honestly not taking the piss when i say this......print one? lol

Pablo Lopez Jimeno
2020-03-17 18:12:44

I have the same issue, I´m very carefull too, I don´t know how it can happend xD

Pierre Eichel
2020-03-17 18:13:32

The plastic sucks. I tried to clean it with ipa and now it's ruined... Don't clean it with ipa ?

Jim Appleby
2020-03-17 18:14:14

Angelus Mew Ellis as a ”noob” I would have to rely on an existing stl...have not mastered creativity yet however I do not imagine it could be that difficult ?

Angelus Mew Ellis
2020-03-17 18:14:55

Angelus Mew Ellis
2020-03-17 18:15:15

that looks like it will do the job, its for car ice so might need resizing but should be ok :)

Jim Appleby
2020-03-17 18:15:21

John Henry
2020-03-17 18:32:47

you bodged it you'll need to buy a new printer.
(or replacement panels if you want to save money.)

James Steven Cheeseright
2020-03-17 18:36:27

Just leave it, they're only windows

Nathan Madche
2020-03-17 18:38:33

The only reason I could thing to replace them would be so you could see how your print is doing but even that's not a good enough reason to care

Chris Holden
2020-03-17 18:44:15

If it bugs you that much, a local (or online) plastics supplier should be able to laser-cut you a replacement sheet of acrylic?

James Steven Cheeseright
2020-03-17 18:49:45

Nathan Madche exactly! If you desperately need to see your print halfway through, just open the door?

Colin 父 Wilkinson
2020-03-17 18:52:33

Razor blade scraper may do it

Chris Konsult
2020-03-17 18:58:18

It blocks more light getting in that way!

Daniel Kelly
2020-03-17 19:03:39

They're so cheap it's not even worth trying to print it. Just search Amazon for plastic blade scraper. I use them for removing prints off the build plate and they're great for it!

Daniel Kelly
2020-03-17 19:04:26

Daniel Kelly
2020-03-17 19:05:48

Angelus Mew Ellis the thing I'm talking about is like a plastic razor blade rather than an ice scraper. Come to think it it'll probably do an awesome Job of getting ice off too!

Dan Barca
2020-03-17 19:09:11

Masking tape the plastic cover and spray the window black, then spray varnish if you want to make it Sci fi and shiny. Also blocks light properly. Don't trust the little yellow plastic windows if your print is sitting finished for a long time

Joel Reid
2020-03-17 19:13:57

Do not use acetone... I did and it makes the window cloudy.

Marko Knezevic
2020-03-17 19:32:37

Anyone has idea where to get photon s spare wondows... mine are ruined aswell...

Cody Ray Pierce
2020-03-17 20:00:21

Buy a new sheet at your local hardware store, cut it to size and drill the holes, paint it black, install.

Thomas 'Noodle' Didcote
2020-03-17 20:05:05

Remove window, soak in ipa

Alonso Elias Rojas Ferrer
2020-03-17 20:08:09

Use Ipa and a razor blade to carefully clean it. It will take a while, take your time. Do a little everyday.

Adam Green
2020-03-17 20:29:03

As long as it still blocks light there's no real issue

Jim Nelson
2020-03-17 21:00:57

I'd just leave it. If you find it unsightly, cover it over with some stickers or contact paper.

Jeff Greenfield
2020-03-17 21:31:57

Cody Ray Pierce wont work on the S. Windows are snap in custom made. Totally different than the OG.

Ben Knipper
2020-03-17 21:34:15

I can draw die lines and upload them this evening for laser cutting. I could make them for anybody who would like feel free to pm me. I dont have the colored acrylic so i’d need some time to get it. Just pay the cost of acrylic and shipping.

Ken Schmitt
2020-03-17 22:23:39

Lucas Parard
2020-03-17 22:40:22

Alexander Bayerdorffer
2020-03-17 22:51:40

Use a razor blade

Gregore Conn
2020-03-17 23:07:54

Paint it black or live with your mistake

Mike Fatchett
2020-03-17 23:13:00

If it hardened, the plastic cover is not very effective at stopping the UV.

Jeremy Mongoose Harris
2020-03-17 23:16:46

Had the same thing happen, I removed the plexiglass and soke it in denatured alcohol over night then a hard scrub. Came off

Alwin Chan
2020-03-17 23:40:07

Leave it. It looks like it came from the Fallout world.

Mark Bryner
2020-03-17 23:45:08

My question is why wouldn't you wipe it off immediately?

Jim Appleby
2020-03-17 23:51:53

Because I was an idiot and as I was getting my first print out is when I first noticed but was more interested in following a process for cleaning and curing it. Only decided to wipe it clean when it was way too late. oh well if this is the worst....

Phlavio Spr
2020-03-18 00:34:36

I managed to recover mine by sanding with 1500 grit paper and then polishing with Kaol. The resin is too harsh for some plastic and plexiglass. It is not a matter of cleaning, unfortunately.

Rigo Arevalo
2020-03-18 01:07:33

razor blade

Scott Pavlich
2020-03-18 01:56:46

Ben Knipper You hot a laser? I’ve got a couple projects I wanted to do in acrylic...how thick can you cut?

Ben Knipper
2020-03-18 02:05:10

Scott Pavlich yep, My bigger one can cut 1.0” thickness

Bernie Horowitz
2020-03-18 03:37:28

your model puked inside the printer. Covid-19?

Scott Pavlich
2020-03-18 03:59:53

Ben Knipper This would be 3/16 or 1/4 max

Ben Knipper
2020-03-18 04:04:05

Scott Pavlich yea thats no problem.

Jim Appleby
2020-03-18 04:39:35

Yes, I think I tried to give it too much in the Vat first time around. Just glad that no real harm done; just embarrassed

Bernie Horowitz
2020-03-18 06:06:42

Jim Appleby We have all done it

Colin Hansen Perras
2020-03-18 06:16:42

That looks like you didn't get the diaper on quick enough

Arthur Withier
2020-03-18 06:50:55

Tucker Harris
2020-03-18 10:17:48

I had to use goof off to clean mine.

Vincent Clayton
2020-03-18 10:53:26

Order replacement glass from Anycubic.

Adam Zed
2020-03-18 22:20:27

Not to be rude but how did you make that much of a mess??

Jim Appleby
2020-03-18 22:25:26

I think I overfilled the vat; also it became worse as I attempted many different methods to clean it. In short as a noob I was a "dumbass"! Good news is I am much better now; what a difference a week can make

Adam Zed
2020-03-18 22:27:08

Jim Appleby this hobby is a constant learning process.

Ben Knipper
2020-03-18 23:07:31

if it makes you feel better the first time I printed something with the photon i dropped the plate corner down onto the LCD and fep sheet and resin started leaking all over my new printer bc I have the fine motor skills of an infant.

Jim Appleby
2020-03-18 23:14:10

fantastic feedback and support from the various forums is what makes this hobby great!

Jim Appleby
2020-03-18 23:31:53

Vincent Clayton I cannot even create a ticket. I am referred to their support page; it assumes I purchased from Amazon. I purchased from the Anycubic-official seller on eBay and without an Amazon invoice number my request can not be submitted. Glad I don't have a real issue!

Vincent Clayton
2020-03-19 00:09:13

James Forder
2020-03-19 06:15:18

Take the screen out and get as much off with IPA as possible, don't use a blade to scrape it off or you will scratch the plastic. Use rubbing compound first over the whole screen to get all the resin off, it will now be cloudy. Use t-cut to get rid of it being cloudy then use polish and make it shiny again.


原文網址 Remi Barbarin
2020-03-17 04:14:32

Hello folks,
Tapping the Hive Mind here if you let me ? .

I've been struggling with an issue with my builds, regardless of the nature of the resin and the settings.

Basically, some layers seem to peel off as if not adhering fully to the build. Pictures below.

I used Anycubic white resin here in 50 and 20 micron layers. First one was cleaned with IPA then detergent, the other with two baths of IPA.

This seems to show after the curing process and thus I suspect I make a mistake with either the cleaning or the curing.

I checked a the vids and guides I could find but couldn't find a solution to this.
Any suggestion folks ?

翻譯年糕

Merv Hinton
2020-03-17 04:28:55

Think about Lift speed

Merv Hinton
2020-03-17 04:29:01

Tim Marcotte
2020-03-17 04:31:02

what are your exposure settings (base and normal, IE 60sec & 8sec)? Was the model on the build plate or was it placed on supports?

Remi Barbarin
2020-03-17 04:34:30

Hello Tim. Both were placed on supports. First one was straight, second was inclined. Both were 40s & 8s, which was matching the big holy spreadsheet of resin settings.

Remi Barbarin
2020-03-17 04:35:40

Hi Merv, thanks for pointing out this resource I didn't know. More reading and testing for me! ;)

Tim Marcotte
2020-03-17 04:40:45

Remi Barbarin that first image looks like it should be a flat bottom rather than wavy. Without seeing your support configuration (perhaps not enough, causing the part to flex), there could be under exposure as well which will make the part more soft and flimsy. I'd check the supports to see that they are dense enough and maybe try increasing the exposure time by a second or two if that doesn't help.

Remi Barbarin
2020-03-17 05:00:23

Thanks Tim. Will check that out on the next builds. It's very possible I didn't use enough support.

Merv Hinton
2020-03-17 05:13:04

Some useful reading..For what its worth I reckon to angle both ways off the build plate so tip back and slightly sideways if that makes sense..30 degrees off flat and maybe 10 degrees tilt..supports I do auto 50% in chitubox then go around,delete stuff in the wrong place but do all around the edges,corners especially and all extremities...partly to force the resin to print there and partly for support..I think temperature plays a great part 25c minimum, 20% inclusion of a flex type resin will help reduce brittleness , resin brand / type / colour I don't think there is a great deal of difference to be honest..A base colour that will help with painting is as good a guide as any...for me...and yes,some guys always print flat off the buildplate some never have buildplate issues, some never have to change a FEP and some never have failed prints...These people I salute..I'm not that good..or that lucky..or I'm a bit more truthful....Just tickle along quietly and learn from the ones that didn't work..because when it does...Oh Boy :) ..

Merv Hinton
2020-03-17 05:13:54

罗西晟
2020-03-17 05:41:58

Remi Barbarin "the big holy spreadsheet of resin settings" also indicates that it is a reference setting and (environment) temperature can be of influence...
Possibly a combination of not enough support and under-exposure.... (under exposure keeps it soft, suction will do the rest with the unsupported parts)


原文網址 Andrew Cameron
2020-03-16 07:24:52

How do you dissipate the fumes. Looking to get the photon s but the toxic smells are what’s holding me back

翻譯年糕

Michael Joseph
2020-03-16 07:34:58

Michael Joseph
2020-03-16 07:35:01

Michael Joseph
2020-03-16 07:35:19

Nick Marincak
2020-03-16 07:35:59

Andrew Cameron
2020-03-16 07:37:22

Michael Joseph
2020-03-16 07:38:28

Luke Mason
2020-03-16 08:26:11

Derek Mifflin
2020-03-16 09:27:26

Michael Wayman
2020-03-16 09:28:15

Christopher Barnes
2020-03-16 09:49:14

Jonathan Greenberg
2020-03-16 21:47:05

Pete Kastner
2020-03-17 00:12:12

Geren W Mortensen Jr
2020-03-17 05:04:46


原文網址 Richard Desaulniers Sr.
2020-03-14 23:40:10

Hello gang,

I am using anycubic black 1l in a photon, and after cleaning using ipa Max 10m , washing with soapy water and 15m curing, my piece are perfect except they are easy to break, you really need to work on it to break it but i was printing clips to lock cables together and the all broke.

Wrong type of resin? To mutch curing? What do you think...

Thanks

翻譯年糕

Peter Csaki
2020-03-14 23:42:44

Richard Desaulniers Sr.
2020-03-14 23:45:13

Michael James
2020-03-14 23:46:11

Michael James
2020-03-14 23:46:40

Corey Ardwin
2020-03-14 23:51:42

Mike Russell
2020-03-15 00:28:05

Scott Pavlich
2020-03-15 11:47:42


原文網址 Kevin Jones
2020-03-14 18:11:58

IPA global shortage has hit us all in 3d printing. We have switched entirely to DPM, what is everyone else using? In our experience DPM is much better than IPA and now much easier to get

Ipa全球短缺在3 d列印中打擊了我們所有人. 我們完全切換到dpm, 其他人都在使用什麼? 根據我們的經驗, dpm比ipa好多了, 現在更容易得到

· 查看原文 · 為此翻譯評分

Vaden Humphrey
2020-03-14 18:18:23

Gabriel Brockman
2020-03-14 18:19:27

Darko Miljak
2020-03-14 18:20:04

Kevin Jones
2020-03-14 18:20:13

Tim Moulton
2020-03-14 18:20:39

Kevin Jones
2020-03-14 18:20:40

Dani Martinez
2020-03-14 18:35:28

Kevin Jones
2020-03-14 18:40:14

Kevin Jones
2020-03-14 18:41:59

Tristan Jones
2020-03-14 18:59:05

Steven Nichols
2020-03-14 19:17:54

罗西晟
2020-03-14 19:32:55

Tristan Jones
2020-03-14 19:56:08

Steven Nichols
2020-03-14 19:57:55

Scott Pavlich
2020-03-14 20:33:35

Tiernan Messmer
2020-03-14 20:37:05

Bernie Horowitz
2020-03-14 21:00:26

罗西晟
2020-03-14 21:24:28


原文網址 Michael Lewis
2020-03-14 00:00:44

Mean green was a alternative to IPA right? If so how long is a good soak time Mean green was a alternative to IPA right? If so how long is a good soak time 翻譯年糕

Daniel Randle
2020-03-14 00:03:06

Kirk Sturgulewski
2020-03-14 00:05:00

Riika Magnus
2020-03-14 00:06:07

Jim Nelson
2020-03-14 00:13:05

Jenny Searcy
2020-03-14 00:31:51

Sean Halihan
2020-03-14 00:32:26

Jim Nelson
2020-03-14 00:33:18

Jim Nelson
2020-03-14 00:34:46

Jenny Searcy
2020-03-14 01:03:41

Neal Conway
2020-03-14 01:10:48

Andrew Springer
2020-03-14 15:49:29


原文網址 Flint Read
2020-03-13 08:20:17

OK FOLKS.

This is a Photon printing group so if you can't keep yourselves from bickering about IPA (I literally buy this once a year in a 5 gallon drum, It's much cheaper that way) or talking about COVID-19 (yes it's awful) then post it in some other group this is not the place for that debate keep it about the printing but more importantly be respectful kind and mindful of each other or you may find yourself not talking in the group at all.

Happy printing all message ends.

好吧, 朋友們.

這是一個光子印刷組, 所以如果你們無法避免為ipa爭吵(我每年用5加侖鼓購買一次, 那麼便宜得多)或談論covid-19 (是的, 這很糟糕) 然後把它貼到其他一些團體, 這不是討論的地方, 而是更重要的是尊重彼此的善心, 或者你可能會發現自己根本不說話.

快樂列印所有訊息結束.

· 查看原文 · 為此翻譯評分

Dominick Trascritti
2020-03-13 08:23:43

Michael Denney
2020-03-13 08:24:05

George Bulte
2020-03-13 08:24:35

Scott Miller
2020-03-13 08:24:56

Flint Read
2020-03-13 08:25:00

Flint Read
2020-03-13 08:25:13

Scott Miller
2020-03-13 08:25:41

Flint Read
2020-03-13 08:26:34

Scott Miller
2020-03-13 08:27:06

Noah Jefferson
2020-03-13 08:27:14

Scott Miller
2020-03-13 08:27:49

Flint Read
2020-03-13 08:28:28

Jay Starling
2020-03-13 08:29:28

Flint Read
2020-03-13 08:29:52

Matthew Tippets
2020-03-13 08:30:29

Jay Starling
2020-03-13 08:31:08

Flint Read
2020-03-13 08:32:12

Wes Swain
2020-03-13 08:32:20

Justin Cupitt
2020-03-13 08:32:27

Daniel Arbuckle
2020-03-13 08:33:19

Jay Starling
2020-03-13 08:33:22

Flint Read
2020-03-13 08:33:45

Flint Read
2020-03-13 08:34:13

Jay Starling
2020-03-13 08:34:24

Flint Read
2020-03-13 08:35:19

George Bulte
2020-03-13 08:35:21

Jay Starling
2020-03-13 08:36:13

Daniel Arbuckle
2020-03-13 08:36:41

Eric Causeway
2020-03-13 08:41:03

Flint Read
2020-03-13 08:44:06

Flint Read
2020-03-13 08:50:36

Eric Causeway
2020-03-13 08:51:55

Flint Read
2020-03-13 08:54:38

Flint Read
2020-03-13 08:55:44

Chris Thiessen
2020-03-13 09:13:34

Fred Williams Jr.
2020-03-13 09:15:31

Barthels Marvels
2020-03-13 09:29:12

Flint Read
2020-03-13 09:29:38

Amy Liao
2020-03-13 09:33:05

Flint Read
2020-03-13 09:37:02

Flint Read
2020-03-13 09:37:35

Flint Read
2020-03-13 09:38:00

Flint Read
2020-03-13 09:39:47

Flint Read
2020-03-13 09:42:01

Gregory Akin
2020-03-13 09:44:25

Flint Read
2020-03-13 09:44:51

Flint Read
2020-03-13 09:45:59

Gregory Akin
2020-03-13 09:51:56

Derek Reihe
2020-03-13 09:56:28

Flint Read
2020-03-13 09:57:01

Derek Reihe
2020-03-13 09:57:15

William Dewling
2020-03-13 10:13:15

Flint Read
2020-03-13 10:24:29

Merv Hinton
2020-03-13 13:45:13

Laura Mataraza
2020-03-13 14:08:13

Alex M Cruz
2020-03-13 14:56:46

Flint Read
2020-03-13 15:05:01

Alex M Cruz
2020-03-13 15:06:10

Flint Read
2020-03-13 15:07:08

Alex M Cruz
2020-03-13 16:10:50

Domenick Brizuela
2020-03-13 16:35:00

Sam Griffiths
2020-03-13 16:56:34

Jason Saiter
2020-03-13 17:19:55

Rich Harrison
2020-03-13 18:23:17

Renos Makrosellis
2020-03-14 00:12:17

Eric Green
2020-03-14 04:33:47


原文網址 Lee Rogers
2020-03-13 03:59:32

Hi, sorry for the newbie questions, but wondering if someone can help me with these?

1. I'm using water washable resin. Washing in an anycubic wash and cure. Once removed after washing, (but before curing), do I still need gloves on?

2. Just printed the second test print on the stick - the exposure test - but it was mega stuck to the plate. Broke a couple taking it off. I just hit print from the stick so not my settings, but wondering if I'm doing something obviously wrong?

3. The residue in the cleaning container is water/resin not ipa. How many times can I use same water, and becasue its water can I just dispose in drain?

Thank you

翻譯年糕

Jim Nelson
2020-03-13 04:15:14

Lee Rogers
2020-03-13 04:28:29

Jim Nelson
2020-03-13 04:31:15

Lee Rogers
2020-03-13 04:35:14

Pete Kastner
2020-03-13 04:36:55

Lee Rogers
2020-03-13 04:45:30

Scott Pavlich
2020-03-13 22:33:58

Lee Rogers
2020-03-13 22:57:40

Scott Pavlich
2020-03-13 23:06:10

Lee Rogers
2020-03-13 23:16:20


 

全不選 發文排行