Anycubic Photon Printer Owners 造訪社團 » resin

Exposure settings champ. It is sliced to suit anycubic trans green. As you are running grey which is opaque, you will need to up exposures. Search for resin exposure test on thingiverse. Read it, study it. Then adjust the settings to suit your resin/machine. What grey is it?

Hi Damian ! I see you got your package. Not sure I have ever seen that particular failure.

Sorry I just read it again. I would start your exposure 9secs per layer on normal.

You wpuld need to re slice that file though

Ben Brooks alright thank you

Amy Baldwin yeah I got in last week but needed Resin which came in today

What's the room temperature? Did you shake the resin well?

Jonathan Basseri yes I did shake it well. The room temp was about 70-75

Dang those both sound good to me

Exposure time, it looks like. For grey, I’d say 8-9 seconds a layer is a good place to start. Also, make sure your build plate is tightened and doesn’t wobble; give it a test jiggle before each print and retighten/level as needed.

Is it that much cheaper than Amazon? I order from Amazon and I get it next day.

I don't think any prior experiences with shipping are going to be accurate based on the current circumstances.

I ordered from them last week. I'm outside Chicago. Took about 7 days to arrive

Yup, current status is that if it isn't medical its a low priority.

Todd Rigertas thanks

Dan Gump The prices were comparable to Amazon, but the specific colors and sizes were not available on Amazon.

I'm in California right now. I ordered on March 10th. Still hasn't arrived.

Heya Phil hopefully any day now then

Bill Leone one can only hope right now.

Dan Gump it is also possible that Amazon will delay your shipment if deemed non-urgent. At least that’s what I keep hearing. I have not verified that.

I retract that comment. They are limiting INCOMING shipments to their warehouses. So essentially if they have it in stock they’ll still send it to you, but only til they run out.

Not count on getting it anytime soon, your governor closed the state.

lots of people say never order directly from anycubic. ive switched to egeloo resin. very happy with it.

Nah, I had a webcam that was originally scheduled for delivery this past Monday. It's now scheduled for Sunday, and I'm not holding my breath about it.

Shipping is critical infrastructure. UPS/Fedex/and USPS are still working as "normal".

Nick Neal true, but can the truckers get through, many states closed rest stops, repair shops, restaurants drive through only.

Theodore Peckler idk about repair shops but most everything is still open out here they just stopped dine in. Most restaurants, chains at least, are open and doing take out only. I saw plenty of semi trucks on the freeway today and all of my shipments continue to track their way through the state.

Nick Neal good luck, I’ve had two shipments go bouncing between two cities back and forth.

Anything ordered from anycubic website comes from their facility in china. They have no US affiliates except amazon...good luck

So you've ordered a Chinese-made Item . . . . From China? I say 'from China' cos it's almost a 100% certainty that US stocks are all but depleted at this stage of the proceedings.

I'm in the UK and it took 10 days to get One Litre that was less than 600 miles and 2 countries away.

Theodore Peckler my shipments do that even when the world isn't ending haha. I've had stuff come in to the state, then go to Colorado, then come back to California. Regardless, nothing in any of them is of any importance. If it's late it's late.

"600 miles and 2 countries away" laughs in Texan.

Lane Shutt And, I should add, the English Channel, the worlds busiest Seaway . . . We're not just talking about popping up to L.A. here . . . We're talking International Commerce so we are ;)

if it wasn't because our postage was so expensive I'd have put 4 liters up for sale

Neal Conway I guess with Brexit it complicates shipping. It's just that people in Texas laugh at others complaining about short distances covering multiple state/ countries.

It’s made for the transparent green I believe. That’s got a fairly low exposure time. What resin are you using?

I picked up a bottle of black since my printer did not have any sample resin. That would probably be fairly different then?

Aaron Dunkerly yeah. Black needs more time in my experience. Probably because transparent allows more uv to penetrate a little better. Do you get the base on the build plate or is it all on the FEP

It gets on the build plate too. It gets submerged a tad when its printing. Bottle says I need to set the exposure to 60 seconds.

This sheet will help you a LOT in setting the proper exposure times: https://www.google.ca/url?sa=t&source=web&rct=j......

awesome, thank you!

I remember we use to have to use transfers or hand paint them. So easy these days ?

Kurk Watson that‘s the Point, i dont like Transfer Sheets ?

For the Emperor!

You don’t play in sanctioned games right?

getting ready to support a load of blood angles pads. did you jsut use three supports for them?

Kirk Brownell no there are a lot more

Shaun Reno no this is my first Killteam Box ?

Michael Supraholic cool, i have like 11 added on the ones im working on, was wondering if i was going over kill with them.

Cool. I was just going to say that GW won’t let you play with 3D printed parts. It’s fine if you just play with friends and people who aren’t dicks.

Shaun Reno how would they know it's 3d printed?

Shaun Reno The Guy at my GW Store is Cool with this i think ?

Thrall Hood i dont know ??‍♂️
I printed at 0,02mm per Layer and you cant see a different between the Original and the printed one.

If you've designed the file itself, it's no different that moulding with greenstuff, plasticard or an other medium, as it's all your own artistry.

Thrall Hood I don’t know. I think it’s stupid but I guess if you’re already a money hungry companies and people find a way to give you less money you’ll get all pissy.

GW accidently swung a bit far towards "cool company" over the last couple years. time to get pissy about 3d printed shoulder pads....

Charles Lease i think they have other problems as a 3D printed shoulder ?

You dont need that many, I printed mine flat to the face with about 5 supports around the rim of the pad. Although I cant find my pictures now.

Several official tournements I went to allowed it as part of customisation as long as most of it was still a gw model, and if you could easily see what it was. It's just part of customisation.

Sjacco Antonius bwahahaha most my armies 3D printed, you can’t tell

Paul Dodd you the real mvp, my next force that's about to arrive requires about 50% printed parts and I'm excited to pass it off.

Chris Beaumont nothing better too if you are a modder, find a file and save that thing to your hard drive before it gets ripped down, I still buy GW stuff, I have the new box set coming

Paul I design my own stuff so not too fussed in that regard, it does dishearten me though when oop or unique designs GW doesn't even produce get either taken down, or dropped in fear of having their whole library taken down.

Try releveling closer to the screen then you think it should be.

I am using the same resin and am having success with 10 layers at 90 seconds

Tom Howley I’ll have to try that instead

Robert Jeppesen I’ve been trying closer each time but I’m always worried about messing up the screen, usually just do the paper test. I’ll try going closer though for my next print.

i've heard that if your resin is too cold, it'll be difficult to get the resin to stick to the plate, try heating the plate before printing

like the build plate? With a lighter or something? I know that’s the case with filament I hadn’t heard that with resin, may be worth a shot ?

the plate... hair dryer

Right I just had never heard that before as far as resin goes, I’ll try it though.

https://www.reddit.com/....../ai44zw/temperature_is_key/

James Richmond nice thanks for the link, my resin and plate should be in those perimeters already but I’m going to heat them a bit nonetheless to see what changes!

Siraya Blu (either the blue colored one or Clear V2).

ty that was what I ended up as my final choice