Anycubic Photon Printer Owners 造訪社團 » resin

原文網址 Andrew Pieper
2019-12-31 21:41:44

Does anyone have a recommendation for a resin that can handle high temperatures needed for rubber mold vulcanization (300 to 320 degrees F). The AnyCubic green I tested cracked before the mold had set and the cracks showed up in the mold.

I know FormLabs has one for the Form 2 and 3, so I know it is possible, but don't know where to look for a comparable product for use in the Photon S.

翻譯年糕

John Popson
2019-12-31 21:44:04

Neil Ramsay
2020-01-01 00:27:06

Will Jamison
2020-01-01 02:53:03

原文網址 Tobse Fritz
2019-12-31 21:30:37

Supports needed? Just printed the Vampirella model on the Photon S . Needed more than 90min to cut off all supports. Was very hard to reach all with the knife or scalpel. Printed it laying with a height of 75mm, so I needed only support on her backside. What do you think, should I use less support and even place it manual, for my next print? Tried it with sandpaper, but her back still looks very scruffy. Sliced in CHITUBOX, printed at 0.02mm with 8s exposure time. The exposure time for the Resin was also a guess -but it has good details.
I will try a paint, as soon I feel prepared ?
Model: https://www.thingiverse.com/thing:3657993 翻譯年糕

Andrej Stojsin
2019-12-31 21:33:13

Krunoslav Zlomislic
2019-12-31 21:42:51

Ed Horn
2019-12-31 22:03:56

Handrez Pintubola
2019-12-31 22:23:26

Chris Bondy
2019-12-31 22:25:45

Lee Fletcher
2019-12-31 22:44:02

Lee Fletcher
2019-12-31 22:49:42

Lee Fletcher
2019-12-31 22:50:21

Lee Fletcher
2019-12-31 22:53:04

JP Legris
2019-12-31 23:06:54

David McCann
2019-12-31 23:20:29

Tobse Fritz
2019-12-31 23:21:35

Aaron McCommon
2019-12-31 23:29:43

Kris Leon
2019-12-31 23:29:44

Gary Carone
2019-12-31 23:33:55

Gary Carone
2019-12-31 23:35:22

Tobse Fritz
2019-12-31 23:36:30

Tobse Fritz
2019-12-31 23:39:51

Jason Pedersen
2019-12-31 23:42:52

Lee Fletcher
2019-12-31 23:51:38

Nathan Kopp
2019-12-31 23:53:33

Walid Khier
2019-12-31 23:56:29

Evan Boone
2020-01-01 00:22:22

Robert Hamberger
2020-01-01 02:18:14

Dick Teh
2020-01-01 02:30:17

Derek Reihe
2020-01-01 02:57:36

Michael Pippin
2020-01-01 03:06:28

Christian Whiting
2020-01-01 03:41:13

Jamie Osborne
2020-01-01 05:39:36

Markus Jorissen
2020-01-01 06:54:13

Wesley Boynton
2020-01-01 07:11:03

Wesley Boynton
2020-01-01 07:11:24

Neil Joseph
2020-01-01 07:17:48

Vincent Balmont
2020-01-01 08:50:07

Jeff Panian
2020-01-01 22:38:58

Christian Whiting
2020-01-04 00:08:48

原文網址 James Bell
2019-12-31 21:12:23

What's ur cure time for 25 microns?
I feel like I might be over exposing my resin a bit.

翻譯年糕

Rasmus Bremholm
2019-12-31 21:21:08

James Bell
2019-12-31 21:23:42

Tom Howley
2019-12-31 21:24:22

James Bell
2019-12-31 21:26:08

Nipuna Gunarathne
2019-12-31 21:41:28

Tay Chauhan
2019-12-31 21:52:14

James Bell
2019-12-31 22:35:16

Tay Chauhan
2019-12-31 22:36:49

Brad J. Babnik
2020-01-01 01:08:06

Tay Chauhan
2020-01-01 01:19:42

Brad J. Babnik
2020-01-01 01:26:37

Tay Chauhan
2020-01-01 01:32:25

Brad J. Babnik
2020-01-01 01:56:34

原文網址 Durich Muaoc
2019-12-31 16:53:15

Does anyone know if Siraya bluetech is heat resistant since I already have it? I am looking for a resin that can handle high heat. About to print a flashlight that's going to house a CREE xml2 high power led on a 16mm heatsink with a forward voltage of 3.0 550mA. It gets pretty hot, like over 100C perhaps.

翻譯年糕

Erik Cederberg
2019-12-31 17:20:23

Durich Muaoc
2020-01-01 00:02:19

Erik Cederberg
2020-01-01 00:02:55

Durich Muaoc
2020-01-01 00:03:29

Erik Cederberg
2020-01-01 00:06:07

原文網址 Saitama San
2019-12-31 16:36:44

My last big project for 2019, itachi and susanoo diorama, i used a HARZ labs clear resin and printed with my photon ?
Stl : https://cults3d.com/fr/modèle-3d/jeu/itachi-and-susanoo

翻譯年糕

原文網址 James Swan
2019-12-31 16:08:08

Ok so I’m a little confused
Earlier today I printed out an ice giant and some test miniatures and they came out great with no print issues
Using the settings from the google doc for the translucent green resin I tried to print an Oni from Titan forge and it came out weird

Where one or two parts seems to have failed the rest of the print came out fine.

I would get it if the print messed up at the same later across the model but it only happened in two places but the rest of the model printed out fine.

(Don’t worry about the white residue, as soon as I saw that the print was messed up I stopped cleaning it up)

I made sure it was leveled (using the flint reed method) and clean prior to the print.

The hand and the back leg are on different sides of the plate but seem to both have an issue where as the rest of the model was fine

翻譯年糕

James Swan
2020-01-01 09:06:54

John Phillips
2020-01-01 17:31:35

James Swan
2020-01-02 00:18:32

原文網址 Bill Keeter
2019-12-31 15:02:30

I'm making replacement parts for some old electronics. What's a good resin mix for accurate parts with some ABS type flex? Such as parts that have little hooks that flex a little and lock into place. Blu mixed with a little Tenacious?

It the moment i've only really been using elegoo grey and black.

翻譯年糕

Susan Sioux Mercer
2019-12-31 16:23:06

Susan Sioux Mercer
2019-12-31 16:25:42

原文網址 Russell Beer
2019-12-31 14:59:03

I have just had my FEP sheet fail. I noticed it when I saw some resin seeping out of the front cover of my Photon. What would cause this? It was only replaced 3 prints ago. Using Dotbit Fep. Cleaning up is a bit of a disaster. I seem to have got my screen clean though.

翻譯年糕

Jarin Udom
2019-12-31 15:01:14

David Brighton
2019-12-31 16:54:37

Russell Beer
2019-12-31 17:08:45

原文網址 Ryan Tudor
2019-12-31 14:05:44

I have a sliced print in chitubox that estimates using 38.7ml of resin. Isn't this more than the fill line on the fep? wont it need to be topped off?
Follow up lol, does the volume estimate in chitubox factor in all the supports, as well as the object?

翻譯年糕

Lucas Riley
2019-12-31 14:08:05

Stefan Giudici
2019-12-31 14:08:49

Elle Heilig
2019-12-31 14:10:06

James Peterson
2019-12-31 14:23:17

James Peterson
2019-12-31 14:24:35

Ryan Tudor
2019-12-31 14:32:37

Sebasti Aan
2019-12-31 14:35:13

James Peterson
2019-12-31 14:38:23

Ryan Tudor
2019-12-31 14:57:39

Greg Miller
2019-12-31 15:04:43

Greg Miller
2019-12-31 15:05:45

Ryan Tudor
2019-12-31 15:06:52

Ryan Tudor
2019-12-31 15:07:23

Ryan Tudor
2019-12-31 15:13:21

Jonathon Sullivan
2019-12-31 15:53:24

Aaron Strome
2019-12-31 16:00:17

Aaron Strome
2019-12-31 16:01:35

Sebasti Aan
2019-12-31 16:03:55

Susan Sioux Mercer
2019-12-31 16:16:57

Susan Sioux Mercer
2019-12-31 16:17:42

Adam Foster
2019-12-31 16:23:12

Zac Lindsay
2019-12-31 16:28:03

Jonathon Sullivan
2019-12-31 16:28:46

Jim Nelson
2019-12-31 21:08:25

Ryan Tudor
2019-12-31 21:43:13

Testo Il Testabile
2019-12-31 21:48:29

Daniel A Trisler
2019-12-31 22:02:17

Gary Houser
2019-12-31 22:24:28

Mike Fatchett
2020-01-01 00:49:18

Stefan Giudici
2020-01-01 01:21:10

Ryan Tudor
2020-01-01 04:55:31

Chad Elstad
2020-01-01 13:18:45

原文網址 Stephanie Predmore
2019-12-31 13:38:10

Can I just say I hate that green resin ? ? Bless hubby for thinking ahead & getting the grey for me. Out of 5 prints I’ve only had 1 failure. I think it was due to me laying it in an odd way. Need to mess with my settings a bit more but, I’m in love. Excited to start painting them!

翻譯年糕

Daniel A Trisler
2019-12-31 13:42:23

Joey Smith
2019-12-31 13:48:52

Len Smith
2019-12-31 13:52:02

Jarin Udom
2019-12-31 13:54:43

Stephanie Predmore
2019-12-31 13:56:16

Jarin Udom
2019-12-31 13:58:17

Stephanie Predmore
2019-12-31 14:00:24

Jarin Udom
2019-12-31 14:01:13

Stephanie Predmore
2019-12-31 14:01:58

Jarin Udom
2019-12-31 14:02:32

Vincent Balmont
2019-12-31 16:00:16

全不選發文排行