Anycubic Photon Printer Owners 造訪社團 » 模型

I found this lovely ship and I remembered how much my mom loved boats so I had to print it in her memory. I used Hero resin Sienna color. If you want to try the model you can get it here... http://3dexport.com/3dmodel-galleon-trinidad-135573.htm

我發現了這艘可愛的船, 我記得我媽媽有多愛船, 所以我不得不把它印在她的記憶中. 我使用了英雄樹脂sienna顏色. 如果你想嘗試模型, 你可以在這裡得到它... http://3dexport.com/3dmodel-galleon-trinidad-135573.htm

· 查看原文 · 為此翻譯評分

Hi All

Pleased to meet you :)

Recieved my Photon 3 days and a starter bottle of the Soy resin in grey.

I mainly design Silver Jewellery and replacement/mods parts for collectible toys and dioramas.

Till now I have been using Shapeways and Commercial casters for my 3D printing needs but am hoping to find a resin that will suitable for Loss wax casting.

After a bit of play starting to get some good prints.

Would I be right in saying the Soy based resin is better for organic models then high detail sharp edge model?

These where printed together and the Dragon head pendant is better then what I get from commercial casters Wax printers but the Templar ring is missing some of the sharpness . The Spartan shield is not round looks like I needed more supports at the bottom.

I guess that will do for a first post :)

大家好

很高興認識你 :)

收到了我的光子3天和一瓶灰色的大豆樹脂.

我主要設計銀珠寶和更換/ mods部件, 用於收藏玩具和dioramas.

到目前為止, 我一直在使用形狀和商業casters來滿足我的3 d列印需求, 但希望找到適合丟失蠟鑄造的樹脂.

在玩一會之後, 開始得到一些很好的指紋.

我說大豆為基礎的樹脂對有機模型更好, 然後高精細鋒利的模型嗎?

這些一起印制和龍頭吊墜比我從商業casters蠟印表機那裡得到的更好, 但聖殿環錯過了一些鋒利. 斯巴達盾牌不是圓的, 看起來我需要更多底部的支援.

我想第一篇帖子就足夠了 :)

· 查看原文 · 為此翻譯評分

Man, I am finding it impossible to place supports without causing major damage to the model , any tips ?

老兄, 我發現不可能在不給模型造成重大破壞的情況下放置支撐, 有甚麼秘訣嗎?

· 查看原文 · 為此翻譯評分

Hello all! I just got my Anycubic Photon printer last night. I'm 100% new to 3D printing (I'm primarily an artist that creates 3d models and illustration but I've always wanted to have my models printed physically.) I have TWO Questions, with images provided.

Firstly, I printed a tiny benchy as a test of the Printer.
The print went well for most of the model but towards the end, Benchy fell off the print bed for some reason. I found it floating in the resin vat.
Could this be due to a leveling issue, or perhaps an exposure duration issue? Or a mix of both? Any advice in identifying the issues when it comes to learning the mysterious process of printing as a newbie to all this?
I believe the settings in the file were as follows

Layer Thickness: 0.05
Exposure time: 10.5
Off Time: 1
Bottom Exposure Time: 80
Bottom Layers: 8

- - - -

Secondly,
I want to print the model I made of one of my characters. He's definitely more complex than a basic Benchy Boat, and I used the provided Slicer software to auto-generate supports. My question for this model would be:
1. Does it need supports added at the tip of the braid and sidebangs? Or will those (ideally) cure to the printer bed and form as it rises?
2. Would the settings shown in the image be adequate exposure and layer thickness time for this type of a model?

Sorry for all the noob questions. But I appreciate any input, as well as any helpful links and resources so I can do some reading on my own as well.
Thank you! :)

大家好! 我昨晚剛拿到了我的任何立方體光子印表機. 我對3 d列印是100 %的新手(我主要是一個製作3 d模型和插圖的藝術家, 但我一直想要把我的模特列印出來.)我有兩個問題, 提供了影象 "我想讓我們知道,

首先, 我列印了一個小小的基準作為印表機的測試.
大多數模型的印刷品都很好, 但最終, 基準因某種原因從印刷床上掉下來. 我發現它漂浮在樹脂增值稅.
這可能是因為一個平穩的問題, 還是曝光時間問題? 還是兩者混合? 當學習作為新手印刷的神秘過程時, 有甚麼建議來識別問題嗎?
我相信檔案中的設定如下

層厚度: 0.05
曝光時間: 10.5
休息時間: 1
底部曝光時間: 80
底層: 8

- - - -

第二,
我想列印我用我的一個角色製作的模型. 他絕對比基本的基準船複雜, 我使用了提供的切片軟體自動生成支援. 我對這個模型的問題是:
1., 它是否需要在braid and sidebang頂端新增支援嗎? 或者那些(理想)會治癒印表機床, 隨著印表機上升時形成?
2. 影象中顯示的設定對於這類模型來說是否足夠曝光和層厚度時間?

抱歉所有的新手問題. 但我感謝任何投入, 以及任何有用的連結和資源, 這樣我也可以自己閱讀.
謝謝! 你知道嗎?

· 查看原文 · 為此翻譯評分

What would cause these strange artifacts/flaps on the side of this model? Haven't experienced this before.

是什麼會導致這些奇怪的藝術品/ flaps在這個模型的一邊? 以前從未經歷過這種情況.

· 查看原文 · 為此翻譯評分

Thought I would share my UV box idea.

Aluminum small trash can (foot pedal operated, easy to put models in without touching the outside and potentially getting resin/IPA on it) + UV light strands and some aluminum foil for the bottom.

I do plan on printing a translucent stand on my FDM printers to bring models up to the middle section (I'll be dealing mostly with 28mm models).

Enjoy the wacky idea lol.

我想我會分享我的紫外線盒的想法.

鋁小型垃圾桶(腳踏板操作, 很容易放入模型而不接觸外部, 可能會獲得樹脂/ ipa) +紫外線和底部的鋁葉子.

我確實計劃在我的fdm印表機上列印一個半透明支架, 將模特帶到中間部分(我將主要處理28毫米型號).

享受這個奇怪的想法, 哈哈.

· 查看原文 · 為此翻譯評分

Having a strange print issue:

Let's see if I can explain this, photos to come later once I get home.

Using the anycubic slicer, latest version, I insert/load my STL and add supports however, when I go to slice the file... some of the support goes away (overall model height shrinks).

And.. to boot the printer printed a raft, which I did not want... and the model was buried in the raft with some details/parts unusable.

Like previously stated, I'll add some photos of last night's print... it has been bugging me today.

有奇怪的列印問題:

讓我們看看我能不能解釋一下, 我回到家以後的照片.

使用anycubic slicer, 最新版本, 插入/載入我的stl並新增支援, 但是當我去切片檔案時... 部分支援消失了(整體模型高度縮小).

還有.. 啓動印表機印表機印表機, 但我不想要的... 模型被埋在木筏裡, 有些細節/部件無法使用.

如前所述, 我將新增一些昨晚列印的照片... 今天一直困擾著我.

· 查看原文 · 為此翻譯評分

Advertising: Please keep advertising posts to no more than 1 a week. Please also contact an admin if you wish to make a post: Kevin , Toby , Mark , Vinicius , Flint .

1) Document Repository on Github. Lets face it, anything is better than Facebook's file section: https://github.com/Photonsters/anycubic-photon-docs

2) Photon Tips and Tricks by Flint Read tons of great information here : https://www.facebook.com/groups/AnycubicPhoton/permalink/1295545357256770/ - How to level your bed: https://youtu.be/roAqm5c3rfU

3) We have a special code for 10% off the your order for Monocure 3D Resins. Use the code MONOPHOTON on your orders (From the Monocure Website). Go here for the post from Charlie Anderson : https://www.facebook.com/groups/AnycubicPhoton/permalink/1285403291604310/

4) Mark Wardle has released some great videos on getting up to speed on printing on the Photon.

Preparing Models to print: https://youtu.be/R7mFeK47pAI

Multi Part Models: https://youtu.be/jG_hd_9QzIM

Add Crossbeam support with B9: https://youtu.be/dODkIIUIUso

5) Artur Fuste has put together this awesome guide to resins, and keeps it updated: https://docs.google.com/…/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s…/

If you are curious where to start with any resin, this is the place to look.

6) Looking to Purchase?

Anycubic Resin on Amazon: https://amzn.to/2rAbQVx

7) Photon Converter V2 : .photons, .photon, .pws, .cbddlp, AA support. https://www.facebook.com/groups/AnycubicPhoton/permalink/1828504693960831/

廣告: 請將廣告貼文保持在每周不超過1個. 如果你想釋出帖子, 請聯絡管理員 :,,

1) github檔案存放處. 讓我們面對現實吧, 任何事情都比facebook的檔案部分更好:

2)弗林特的光子技巧和技巧閱讀了大量的資訊: https://www.facebook.com/groups/AnycubicPhoton/permalink/1295545357256770/-如何平穩你的床 : https://youtu.be/roAqm5c3rfU

3)我們有一個特殊程式碼, 可以折扣您的單治癒3 d樹脂訂購10 %折扣. 在您的訂單中使用單個程式碼(來自monocure網站). 到這裡獲取查理·安德森的帖子: https://www.facebook.com/groups/AnycubicPhoton/permalink/1285403291604310/

4) mark wardle釋出了一些關於加速在光子上列印速度的精彩視訊.

準備列印模型:

多部分模型:

用b9新增橫梁支援:

5) artur fuste編集了這本很棒的樹脂指南, 並不斷更新: https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/

如果你想知道從樹脂開始, 這裡就是尋找的地方.

6)想購買?

亞馬遜上的任何立方體樹脂: https://amzn.to/2rAbQVx

7)光子轉換器v2: 光子, 光子. Pws, Cbddlp, aa支援. https://www.facebook.com/groups/AnycubicPhoton/permalink/1828504693960831/

· 查看原文 · 為此翻譯評分