Anycubic Photon Printer Owners 造訪社團 » ROS

I'm having two issues with my Heroforge prints that I was hoping the collective might be able to help me out with....

1. The bases keep coming out with little to none of the bevel so that where the writing goes is nearly flat to the table as opposed to having the proper edge around the base. You can see it in the attached mini image where the edges are arched and should be straight across.

2. The level of detail I'm getting out of the Anycubic ECO Resin (Gray) isn't up to par with what I'm seeing from various demonstrations of these resins and I'm wondering if anyone has any known good settings for these resins that haven't made it into the community sheet yet or have any advice on dialing settings in and/or other issues that could be causing the disappointing level of detail.

Thanks in advance!

翻譯年糕

I recently got an Anycubic Photon and this is my latest batch. I am using Anycubic’s white resin, I set exposure for the bottom at 60 and exposure for the rest at 10. I tried leveling it twice before printing. Does anyone have any tips to help prevent more partial prints? I took an individual picture of the crossbow Goblin to show that the support for the back part of the crossbow did not print.

翻譯年糕

So I had an interesting fail today, one side came out fine (the left in this image) the right not so fine.
Any ideas why it we time that? There weren't any supports on the sides so I'm confused why pushed across.

翻譯年糕

Ok so I’m a little confused
Earlier today I printed out an ice giant and some test miniatures and they came out great with no print issues
Using the settings from the google doc for the translucent green resin I tried to print an Oni from Titan forge and it came out weird

Where one or two parts seems to have failed the rest of the print came out fine.

I would get it if the print messed up at the same later across the model but it only happened in two places but the rest of the model printed out fine.

(Don’t worry about the white residue, as soon as I saw that the print was messed up I stopped cleaning it up)

I made sure it was leveled (using the flint reed method) and clean prior to the print.

The hand and the back leg are on different sides of the plate but seem to both have an issue where as the rest of the model was fine

翻譯年糕

Hi there! I'm still fairly new to the 3D printing game, and while compiling my giant folder of things to print I'm stumbling across files that are too big to print on my machine that cannot/should not be scaled down (a Tiamat figure, a drink can holder that looks like a tavern mug, etc)

Is there a program I can use to break these larger files up and more easily printable? (separate tiamat's 9 pieces manually, chunk up the mug into 'rings' or 'halves' that can be glued together post-printing) I haven;t gotten into the modelling portion of the hobby yet, but I want to do these for some friends who have helped me troubleshoot a lot of my beginner mistakes.

翻譯年糕

Hey everybody, I got a Photon for Christmas. I’ve been trying to print with it for a few days now. I got some to print yesterday and it worked great. Other than that one success, it always fails after printing the bottom layer. I thought I got the settings right finally after that one, but all I’ve gotten are failures again today. I get a big piece across the FEP. I hear it sticking to the FEP as it lifts the build plate the first couple times and then after that I don’t hear it and I never get a print. It’s like it’s cooking to the FEP and peeling it off the build plate. Any help would be great. I’ve leveled it multiple times using the paper method and Flint Reed method.

翻譯年糕

A quick pre-new year preview of my January releases for Patreon. I'll be adding enough extra poses and variants to make a unit of knights on foot and mounted by the end of the month if all goes to plan as I'll be officially full time sculpting as of 24th Jan!

Wishing you all a very happy and prosperous 2020!

翻譯年糕

OK I know I'm new to resin printers but in all seriousness with fdm I can see a failure in 5 min. Reset and be good how do you the pros in here know it is working and can walk away and not wait for 1 hr or so to look at build plate while it lifts up and then see its failed. I don't wanna waste time if it's bad. Any pro tips. CN I. Somehow edit gcode or equivalent to in 5 min lift up to viable height then let me inspect and then continue? Or am I asking too much of such a low cost printer? I'm sure I can't be only one who has had this question.

翻譯年糕

I was reading through the announcement and came across the warning about not buying the newer photon because it has the photon s board in it. I just pulled the trigger and purchased it but I'm wondering if that was a good idea or should I just return it and wait for the eegloo mars upgrade when it comes out in mid January? Are there folks that have one of these already and does it work like you want it to? Thanks in advance.

翻譯年糕

Thanks for the add. I do alot with 1:25 scale models and these printers have really been a game changer for the hobby!! I havent had any major issues yet. (Fingers crossed) heard about this group on a YouTube video last night so i figured it would be a good source to help when i can and be helped when needed.

翻譯年糕