• 3D列印服務
  • COSPLAY 3D 建模
  • #maker+t=market
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » UV

原文網址 Jason Cartwright
2019-12-02 22:54:20

I would never buy Elegoo (gray) resin again.
I wanted to try the Elegoo Gray, but after two bottles both leaving my prints tacky, even after an entire day in the sun, I am switching back to Anycubic Gray. I also dont get the finer details on small prints using Elegoo... All my prints seem to be rather "soft" in appearance.
I let Elegoo know, and they are sending me a new bottle. So that is cool of them. I am hoping that maybe the new UV lamp I have coming will cure them better. Here's hoping. But yeah, after this... it's back to Anycubic for me.
(I do know some use and love Elegoo, I am just stating my personal experience with it)

翻譯年糕

Steven Raybell
2019-12-02 22:57:47

Joe Harter
2019-12-02 22:58:08

Jason Cartwright
2019-12-02 22:59:06

Steven Raybell
2019-12-02 22:59:10

Steven Raybell
2019-12-02 22:59:46

Mark Rhodes
2019-12-02 23:23:26

Mike Roof
2019-12-02 23:26:23

Evan Boone
2019-12-02 23:39:09

Andrew Burns
2019-12-03 00:11:56

Doug Clark
2019-12-03 00:13:28

Benny Woolley
2019-12-03 00:25:27

Ian MacMillan
2019-12-03 00:28:48

Anders Scot Hudson
2019-12-03 00:37:13

Alexander Keith
2019-12-03 00:46:11

Dan Hjulberg
2019-12-03 00:48:59

Chris D'Andrea
2019-12-03 01:16:20

Chris D'Andrea
2019-12-03 01:19:03

Cody Raskin
2019-12-03 01:24:04

Jeff Greenfield
2019-12-03 02:02:56

Battlesir Holland
2019-12-03 03:21:51

Carter Goforth
2019-12-03 04:06:29

David Arnold
2019-12-03 04:36:16

Matt Olsen
2019-12-03 05:10:03

Veda Toys
2019-12-03 07:56:42

Evan Miller
2019-12-03 12:32:12

Nicholas Taylor
2019-12-03 13:14:09

Carter Goforth
2019-12-03 21:55:01

Jason Carlisle
2019-12-03 22:53:25

Evan Miller
2019-12-03 23:01:46

Neil Ramsay
2019-12-03 23:26:51

Battlesir Holland
2019-12-03 23:55:42

Domenick Brizuela
2019-12-05 13:41:43

Domenick Brizuela
2019-12-05 13:42:07


原文網址 Warren Peace
2019-12-02 13:30:31

UV box made from 2 Nail Star machines. Do I even need to do this?

翻譯年糕

Al Espina
2019-12-02 13:32:20

Paul Youdelis
2019-12-02 13:34:47

Warren Peace
2019-12-02 13:36:36

Scott Comber
2019-12-02 13:39:14

Scott Comber
2019-12-02 13:39:21

Brian Todoroff
2019-12-02 13:40:19

Jon Foster
2019-12-02 13:40:54

Winup McModels
2019-12-02 13:42:39

Daniel Rowe
2019-12-02 13:42:59

Warren Peace
2019-12-02 13:48:13

Adam MacIntosh
2019-12-02 13:50:00

Aaron Dunster
2019-12-02 13:50:06

Warren Peace
2019-12-02 13:52:49

Aaron Dunster
2019-12-02 13:53:32

Nichlas Eldrup Albech Andersen
2019-12-02 13:57:58

Nichlas Eldrup Albech Andersen
2019-12-02 14:04:19

Nipuna Gunarathne
2019-12-02 14:05:19

Cody Frush
2019-12-02 14:07:31

Michael Barfus
2019-12-02 14:11:23

Panos Dolly
2019-12-02 14:28:11

Thanos Panagiotaros
2019-12-02 14:39:40

Jorge Sampaio
2019-12-02 14:57:25

Alex Vee
2019-12-02 15:31:58

Jorge Sampaio
2019-12-02 15:32:49

Alex Vee
2019-12-02 15:33:17

Eric Weber
2019-12-02 15:34:29

Jorge Sampaio
2019-12-02 15:38:51

Alex Vee
2019-12-02 15:39:22

Roman Skrzek
2019-12-02 15:57:48

Rob Walker
2019-12-02 16:04:43

Philipp Amann
2019-12-02 17:31:15

Ray Santiago
2019-12-02 17:35:00

Reb O'Rourke
2019-12-02 17:39:54

Carlo Aemos Residori
2019-12-02 18:35:55

Mark Wardle
2019-12-02 19:27:00

Karl Schuneman
2019-12-02 19:48:40

Mark Wardle
2019-12-02 19:50:18

Kelly Filgo
2019-12-02 20:07:22

Nikki Maisala
2019-12-02 20:39:41

Chuck Ferrell
2019-12-02 23:26:28

Caleb Borland
2019-12-03 00:15:43

JD Grimm
2019-12-03 01:02:49

Nipuna Gunarathne
2019-12-03 01:31:32

James Reedy
2019-12-03 01:53:48

Matthew Auen
2019-12-03 02:14:10

David Collinson
2019-12-03 02:49:51

Nathan Portnoy
2019-12-03 02:52:58

Eric Jorgensen
2019-12-03 05:09:35

Daniel Rowe
2019-12-03 17:48:47

David Collinson
2019-12-03 20:19:03

Daniel Rowe
2019-12-03 20:22:30

Daniel Rowe
2019-12-03 20:23:49

Daniel Rowe
2019-12-03 20:24:51


原文網址 Thomas Howeth
2019-12-02 11:12:05

Second print ever. Looks pretty amazing...but my UV light won’t arrive until Thursday....so it’s Wampa cave training for baby yoda thus week

翻譯年糕

Thomas Howeth
2019-12-02 11:20:16

Thomas Howeth
2019-12-02 11:22:27

Thomas Howeth
2019-12-02 11:23:09

Jason Archuleta
2019-12-02 11:30:39

Jason Archuleta
2019-12-02 11:31:00

Dillon Whitaker
2019-12-02 11:31:15

Joel Mendoza
2019-12-02 11:40:20

Thomas Howeth
2019-12-02 11:52:53

Joel Mendoza
2019-12-02 11:55:51

Thomas Howeth
2019-12-02 11:56:22

Jose Alfonso Ortiz
2019-12-02 15:18:33

Patrick Smith
2019-12-03 08:07:54

Thomas Howeth
2019-12-03 08:14:53


原文網址 Alexander Keith
2019-12-02 08:53:24

Short Version: Please help me with a memory m_11800 error. If you've overcome this error please tell me how you were able to fix it. I'm also open to suggestions for other things to try. Finally what firmware should I use if I update it? Anycubic.com has two listed V5.0.2 and V4.2.19, which firmware should I use? My photon currently has V4.2.12
Long Version: Hello there folks, I started with the anycubic photon this wednesday and definitely had a couple of days of that sweet sweet honeymoon before slamming into problems. Namely I had a print stop mid print with an error code (because I'm foolish I didn't record what it was but I have a sneaking suspicion) and since then I can't get anything to work. I've had over prints not sticking to the plate, many many memory errors and finally I've contacted anycubic support, but I would like your opinions in the meantime as I await a response from them.

Fixes and troubleshooting I've tried:
I did what I thought was best so I opened up the photon docs on the photonsters github and got to troubleshooting.:

First thing's first, I ditched the stock usb to use a much better one that I had on hand, 8gb, fat32 etc. However this still resulted in a failed print with a memory error.

Next, I removed the usb stick and did a power cycle for the printer. This allowed me to do a full resinless print (no resin in the vat) so I could double check that the usb could be read. It seemed to work fairly well, the photon went through the entire print without a memory error. With resin however my next print did not stick to the plate at all, I checked my FEP tension, found it was at 280 Hz according to an audio analyzer, releveled the build plate and checked everything again without resin. It seemed much better, I tightened the FEP to 300 Hz just in case and tried again. After which, with resin in the vat, the next couple prints failed with a memory error m_11800, however the failed prints are sticking to the plate and even filtering the vat and checking the FEP all is clear in the vat. However the memory error is still very annoying. I figured it could be PSU related because the first time and last time I had a memory issue while printing if I moved the PSU at all it would disconnect the mains from the adapter via the adapter's plugin. So I zip-tied the two together, removed my UV lamp from the powerbar (when I turn it on it messes with my regular lamp so I know it doesn't play nice with the other devices plugged in). I also decided to try with the usb stick plugged directly into the motherboard to minimize any potential issues. Memory error. M_11800 again. So I started a support ticket and here I am now.

What should I try next? 翻譯年糕

Jason Lund
2019-12-02 13:51:41

Alexander Keith
2019-12-02 13:54:10

Sen Kun
2019-12-02 15:53:27

Jason Lund
2019-12-02 20:06:07

Jason Lund
2019-12-02 21:57:22

Alexander Keith
2019-12-02 23:38:43

Jason Lund
2019-12-02 23:52:27

Jason Lund
2019-12-02 23:54:51

Alexander Keith
2019-12-03 00:31:24

Jason Lund
2019-12-03 01:46:09

Eric Jorgensen
2019-12-04 11:22:40


原文網址 Eric Tucker
2019-11-29 23:03:46

Any recommendations for a good quality UV lamp and UV flashlight?

Currently have a UV light strip in a box, but not getting the greatest results. Want to make a better curing box. Seems to be a lot of junk lights out there.

翻譯年糕

Nipuna Gunarathne
2019-11-29 23:05:27

Mark Wardle
2019-11-29 23:06:49

Mikel Deiman
2019-11-29 23:19:14


原文網址 Richard Clinton
2019-11-29 03:53:18

If the cloudy weather is showing a UV index of low or 0, will my resins still cure?

翻譯年糕

Colin Cowper
2019-11-29 04:16:48

Richard Webb
2019-11-29 04:28:18


原文網址 Khristian Sutherland
2019-11-27 17:59:21

I wanted to run an idea by you guys. I have some clear resin coming, and I thought it would be neat to print clear dice, and have a negative space in the center, like a skull, or literally anything really. I would also have a small hole leading from the outside of the dice to the negative space, that I could stick a needle through and inject resin into, which I could then just cure from the outside, since the dice would be clear. Then to fill in the hole, inject clear resin and hit with more UV. What do you guys think? As dice, would they roll well as long as they're completely solid like this, or is there a chance they could be "weighted"? Is there a better way to do this? Any problems I may come across? Any thoughts are appreciated.

PS. This video is what gave me the idea.
https://www.youtube.com/watch?v=KesvLciE8rw&t=5s 翻譯年糕

Joel Reid
2019-11-27 18:06:07

Khristian Sutherland
2019-11-27 18:08:11

Joel Reid
2019-11-27 18:08:30

Khristian Sutherland
2019-11-27 18:09:25

Khristian Sutherland
2019-11-27 18:11:51

Alan Brown
2019-11-27 18:17:45

Joel Reid
2019-11-27 18:19:07

Khristian Sutherland
2019-11-27 18:21:54

Khristian Sutherland
2019-11-27 18:23:16

Rose Stumpwater
2019-11-27 18:24:42

Khristian Sutherland
2019-11-27 18:26:04

秦教民
2019-11-27 18:45:16

Joel Reid
2019-11-27 18:52:36

Joel Reid
2019-11-27 18:54:09

秦教民
2019-11-27 19:12:11

Alan Brown
2019-11-27 19:41:56

Mikko Asikainen
2019-11-27 21:10:21

Robb Nunya
2019-11-27 21:54:16

Khristian Sutherland
2019-11-28 01:24:19

Khristian Sutherland
2019-11-28 01:27:05

William Quayle
2019-11-28 02:31:12

William Quayle
2019-11-28 02:35:42

Khristian Sutherland
2019-11-28 02:46:12

Khristian Sutherland
2019-11-28 02:47:42

Khristian Sutherland
2019-11-28 03:42:53

Khristian Sutherland
2019-11-30 15:16:37

Robb Nunya
2019-11-30 23:35:51


原文網址 Rand Stamm
2019-11-27 14:46:03

I am beyond pleased with the amazing detail captured in the first prints from my new Anycubic Photon using the Eco UV Resin. It is hard for a photo to capture the incredible detail using the Macaroon Green but it is really amazing.

翻譯年糕


原文網址 Noah Belveal
2019-11-27 12:24:45

Is monocure flex the only/best flexible UV resin?

翻譯年糕

Sean O'Hayer
2019-11-27 12:38:06

Matt Farmer
2019-11-27 13:23:27

Douglas J. Behringer
2019-11-28 01:50:34

Matt Farmer
2019-12-04 12:01:27

Sean O'Hayer
2019-12-04 12:07:22

Andrew Maynard
2019-12-04 13:26:28

Matt Farmer
2019-12-04 13:27:02


原文網址 Glenn Manser
2019-11-27 09:45:27

Thanks for the add guys, greatly appreciated. Now, I have 2 questions for you all. I ordered my Anycubic and it gets delivered tomorrow.

I know I need a UV light to cure the resin (I don't live anywhere where consistent sun is a thing), so looking for advice on which light to go with.

Second, If you print something that has to be broken into multiple parts, can you "glue" the pcs together then cure the resin, thereby bonding the pcs together?

翻譯年糕

Jon Vogel
2019-11-27 09:56:15

Glenn Manser
2019-11-27 09:57:02

Jon Vogel
2019-11-27 09:59:10

Glenn Manser
2019-11-27 09:59:57

Jon Vogel
2019-11-27 10:02:35


 

全不選 發文排行