Anycubic Photon Printer Owners 造訪社團 » 時間

原文網址 Jeremiah Chetwood
2020-03-30 09:05:36

Well decreasing the bottom time to save time on a print doesn't always work......darn

好吧, 減少底部時間來節省列印時間並不總是奏效...... 可惡

· 查看原文 · 為此翻譯評分

Alexander Bayerdorffer
2020-03-30 09:09:44

...

Richard Flanagan
2020-03-30 09:09:51

...

Brendan Wood
2020-03-30 09:10:57

...

John Chrapkowski
2020-03-30 09:41:35

Nope. The reason is it must stick for all the remaining pulls

原文網址 Scott Mitchell
2020-03-26 22:11:20

Is there a way to pause a print, power down the printer and power up and continue printing where you left off? Been printing a piece for 7 hours and got 4 left, but just got word they may be shutting power down in my neighborhood for a while. Ughhhh. Printing on an Anycubic Photon.

有沒有辦法可以暫停列印, 停電印表機, 並繼續在你離開的地方繼續列印? 列印了7個小時, 還剩4個, 但剛剛得到訊息, 他們可能在我的鄰居停電一段時間. 啊啊啊. 在任何立方體光子上列印.

· 查看原文 · 為此翻譯評分

Ryan Shelvik
2020-03-26 22:22:23

Sad to say...not really an option afaik

Scott Mitchell
2020-03-26 22:25:39

That's what I figured. At 61% now and crossing my fingers.

Ryan Shelvik
2020-03-26 22:30:34

Scott Mitchell look into apc battery backups. If you get a big one...could print for a while. Little one will protect you from power blips

Ryan Shelvik
2020-03-26 22:30:46

Just as a solution for down the road

原文網址 David Martin
2020-03-25 22:39:27

Anyone else notice that shipping times for rigid resin on amazon have been changed to the end of April?

還有誰注意到亞馬遜硬質樹脂的運輸時間已經改成四月底?

· 查看原文 · 為此翻譯評分

Raymond Noriega
2020-03-25 22:40:58

I think they stoped shipping stuff atm

Brandon Elkins
2020-03-25 22:41:12

Yeeeeeep. Non-essential. They were probably shipping from China and now aren't anymore.

Tim Hoehn
2020-03-25 22:44:26

There not fulfilling orders unless its medical right now

Riika Magnus
2020-03-25 22:46:54

Pretty much most resin is deferred until then.

David Martin
2020-03-25 22:59:52

I ordered some on ebay that says it should be here by Monday. Hopefully it works out. I go through almost 2 L a day. Guess I got spoiled with the next day shipping on Amazon.

William Tatum
2020-03-25 23:02:29

Check out Newegg, I got 3 liters coming should arrive this week.

Zach Hightower
2020-03-25 23:07:42

Amazon is going to be hit or miss right now. I have had some "essential" things delayed by a couple weeks and some toys hitting my mailbox the next day.

Joe Civitello
2020-03-25 23:10:07

I had shit delivered same day and the same stuff delayed 4 weeks...

Doyle Souders
2020-03-25 23:15:09

Same with PLA. So much for making face shield frames.

Oscar H. Montes
2020-03-25 23:18:13

I ordered with 4/21 delivery and still showed up 2 days after

Jake Oliver Foster
2020-03-26 00:21:03

Prime-able items still arrive within 2 days at the moment, it seems. If you cant get it on prime then itll take as long as it takes.

Jeff Miller
2020-03-26 01:04:13

Game the system, order vitamins with it but put them in the cart first.

Chris Robinson
2020-03-26 03:13:50

I ordered some filament on prime, and they still quoted me end of April.

Jake Oliver Foster
2020-03-26 03:26:30

Chris was this Amazon-sold or a private seller?

Chris Robinson
2020-03-26 04:37:37

Jake Oliver Foster PRetty sure Amazon. Hatchbox stuff. It's all good though... I went to my local microcenter and got 2 rolls for only 10 bucks more than I would have paid for the one roll.

Jake Oliver Foster
2020-03-26 05:17:26

Chris ah least you managed to get some!

原文網址 Chiewata
2020-03-24 14:24:22

My UV box was not deliver on time so I try to cure the prints inside my study room, may I know if in condition like this how much time needed to fully cure?

我的紫外線盒沒有準時送出, 所以我試著治癒我的書房內的指紋, 我可以知道這種狀況是否需要多少時間才能完全治癒?

· 查看原文 · 為此翻譯評分

Zena Andreou
2020-03-24 14:25:53

check every couple of minutes till they stop being sticky and rotate them as needed :)

Chiewata
2020-03-24 14:26:13

Zena Andreou thank you

Brandon White
2020-03-24 14:28:15

In sunlight 20-30mins

Chiewata
2020-03-24 14:30:25

Brandon White thank you

Brent Heidtke
2020-03-24 14:30:25

Window glass blocks some UV, better in direct sun.

Dan Andersson
2020-03-24 14:42:46

20-30 mins sounds very long. You do not want to over cure because the part gets more brittle.

Brandon White
2020-03-24 14:44:42

Dan Andersson it might be but it also depends on uv concentration, 15-20 in, with just sun light my prints are still sticky, its the main reason i switched to a uv light, but im sure in different locations its short times/longer times

Dan Andersson
2020-03-24 14:49:12

If you put your prints in direct sunlight, i have a very hard time to believe that a uv light would be faster. If you have a window between, then it is possible.
A cloudy day is easily beaten with uv light.

Brandon White
2020-03-24 14:50:03

Dan Andersson uv light has always been faster for me

Daniel Kelly
2020-03-24 16:15:19

Usually uncured resin will take a dent from a fingernail being pressed in. Leave it out in sunlight until it no longer takes a dent

Clifford Schwankner
2020-03-24 20:17:20

sun 10 to 15 min tops...imho...i have a curing box but use the sun every chance i get...

原文網址 Mark Anthony Vasquez
2020-03-23 03:20:33

Once you nail your settings and understand how to use the Photon, its a gateway to way too many things you will never have time to paint or play with ?

一旦你完成你的設定並瞭解如何使用光子, 它是一個門戶, 你永遠不會有時間畫畫或玩耍的東西 ?

· 查看原文 · 為此翻譯評分

Yamamoto Tifa
2020-03-23 04:33:08

What are your settings? I'm experimenting with mine

Mark Anthony Vasquez
2020-03-23 05:09:02

Depends on the resin, Elegoo Skin and Grey seem to do good for me at 10s and the Elegoo Clear Green and Red are 12s. Using Prusa for orientation and 70% supports and Chitubox to slice

Shawn Spradling
2020-03-24 03:35:00

Prolific!!

原文網址 Robert Clauff
2020-03-23 01:01:49

Ok. I'm having a serious issue here. I printed my initial test print on the photonS however every other print I have attempted I can't get bed adhesion. I've looked at a lot of FAQs and have tried them all. Wtf is the issue. The last print had 10s exposure time, bed exposure at 100s, and several different models. Any suggestions would be appreciated.

好吧. 我這裡有一個嚴重的問題. 我把我的初步測試指紋印在光子上, 但我嘗試過的每一個其他列印, 我無法得到床粘合. 我看了很多常見問題, 都試過了. 他媽的是問題. 最後一張列印有10秒曝光時間, 床曝光時間為100 s, 以及幾個不同的模型. 任何建議都將不勝感激.

· 查看原文 · 為此翻譯評分

Christian Savarda
2020-03-23 01:31:30

Relevel? What kind of resin and what does your supported STL look like?

Josh Tollison
2020-03-23 01:38:06

What all have you tried so far?

Juaco Amado
2020-03-23 01:48:13

Have you changed the FEP lately? It might be not tight enough

Robert Clauff
2020-03-23 01:55:02

When I level I get the paper so that it can't be barely moved. Is that too far perhaps?

Robin MacNeil
2020-03-23 04:00:59

Robert Clauff I used a video that really helped, which said, you should be able to pull it out with a bit of force, but if you try to push it back it bends. So yours sounds a tiny bit too tight.

Robert Clauff
2020-03-23 04:06:07

Robin MacNeil I'll give it another run at #5 and hopefully I get something.

Robin MacNeil
2020-03-23 04:07:59

Robert Clauff Check your resin against this chart to help find the best exposure too: https://www.google.ca/url?sa=t&source=web&rct=j......

Daniel Green
2020-03-23 12:13:24

keep upping your bottom exposure. Mine were sticking until i went to something like 130 or 150

Robert Clauff
2020-03-24 05:30:52

UPDATE: So here are some videos of the fail, cleanup, and re-level. I will post the settings shortly.

Robert Clauff
2020-03-24 05:31:13

Robert Clauff
2020-03-24 05:31:30

Robert Clauff
2020-03-27 02:33:40

UPDATE: Got my problem fixed and a successful print!

原文網址 Jolene Sweeney
2020-03-19 13:00:47

Hello!

So brand new to printing with resin spend a lot of time using FDM
I have a photon zero :)

I'm struggling with my elegoo translucent resin. I have a couple issue.

1: the models are slightly yellow when I get them off the printer. I know yellowing is cause by over curing I reduced it down to 7s .04 layer. Do I need to go lower?

2: the models are STUCK to the bed. Like it takes a lot of force to get them off... they are support free models from fat dragon games but I never had this issue with my gray resin and I used the same file...

3: how to cure them to stop yellowing.... I cured using a uv light for 3 min... jot terrible but still yellow....but also came off the bed yellow.

I do have to use acetone to clean models :( mean green did not work well for me so I moved to acetone.

Not really experiencing any issues with my elegoo gray resin at this time...

你好!

用樹脂列印的全新, 花了很多時間使用fdm
我有個光子零 :)

我在和我的elegoo半透明樹脂掙扎. 我有幾個問題.

1: 當我把它們從印表機上拿下來時, 這些模特有點黃色. 我知道黃色是因為過度治癒, 我把它降到7 s. 04層. 我需要低點嗎?

2: 模特卡在床上. 像它需要很大的力量才能讓他們脫掉... 他們是fat dragames的免費模特, 但我從未有過灰色樹脂的問題, 我用了同樣的檔案...

3: 如何治癒他們停止黃色.... 我用紫外線照燈治癒了3分鐘... jot可怕但仍然是黃色.... 但也下床.

我必須用丙酮清理模型:(意味著green對我不好, 所以我搬到了丙酮.

現在沒有真正遇到任何問題與我的elegoo灰色樹脂的問題...

· 查看原文 · 為此翻譯評分

Ben James Couey
2020-03-19 13:11:09

Jolene Sweeney
2020-03-19 13:13:19

Ben James Couey
2020-03-19 13:14:41

Jolene Sweeney
2020-03-19 13:16:01

Ben James Couey
2020-03-19 13:18:16

Jolene Sweeney
2020-03-19 15:44:41

原文網址 John Driggers
2020-03-18 11:47:01

Anyone else doing any exposure testing on the Zero? Cooked this up today, if anyone has the factory Zero stl I'd really appreciate it! 4s start time, Phrozen Rapid Aqua Green

還有誰在零進行曝光測試嗎? 今天煮了這個, 如果誰有工廠零, 我真的很感激! 4 s開始時間, phrozen快速aqua green green

· 查看原文 · 為此翻譯評分

Alejandro Quesada
2020-03-18 12:49:29

So, how do these ones work? The platform Prints every leyer at a time controlling the different exposures without moving the build plate?

John Driggers
2020-03-18 12:55:46

Yes - just like the "old" firmware patch version, except this one is built into the running firmware! You get base + 8 seconds for each of the 8 objects. I had to hack together an STL based on the original photon files which are too large. I didn't want to scale so we could compare printer to printer.

原文網址 Rigo Arevalo
2020-03-13 07:55:17