Anycubic Photon Printer Owners 造訪社團

You double it. It's displaying 2x each number there when printing the test card, so if 7 looks best it's because it was exposed for 14 seconds.

Stefan Giudici oh wow. So I need to use 14 seconds for my clear resin?

I didn't look at your test card, you need to use 2x whatever the best looking number is tho. Good clear resins aren't very fast. Fast clear resins yellow a lot more

Ok. I'll try 14 seconds and do some quick prints (by quick I mean a few hours. Lol)

I’ve never really found this test matches up with what I end up running for clear. Monocure clear runs beautifully at 9s for a .04 layer yet the exposure test told me 14s...I’d strongly recommend running a calibration model and see where your settings look best with that: here the 12s is already showing overexposed whereas the 9 is crisp and clear...and Anycubic yellows fast compared to the Monocure

Scott Pavlich can I have a link to this calibration model? I'm using Elgoo translucent

https://www.dl.dropboxusercontent.com/....../MonoMatri......

Thank you

Mika Gruszka It takes under 45min to run at .04, chose an exposure (I only do like 3 bottom layers, just enough so it sticks) then keep dropping your exposure watching closely the features...you’ll know you gone too low it that bridge area above the word Monocure shows delamination like this one

So I should reprint this with lower exposure each time?

Mika Gruszka Yep. But the nice thing is once you’ve done it unless you change resins you don’t have to do it again. I’ve kinda learned where to start and only have to print 1 or 2. And the only thing you want to change is the regular exposure...unless what you are testing is bed adhesion

Is that from Warframe?

Mika Gruszka nope, it’s the storm javelin from anthem

Oh, I've never heard of that, but it looks super cool! Did you print it all out in one piece?

Mika Gruszka nope, printed the entire
Torso and thighs with the cape in one piece, then the head, bottom half of the right foot and bottom left left, and both arms in one go.

And that’s surprising you haven’t heard of it, it was a huge disaster of a game. Almost same level as the launch of no mans sky. Super fun to play, just really broken

Tucker Adams that is sad because I love broken games!

Wow it came together so well! Looks awesome!

Mika Gruszka thanks! The designer really did an amazing job. I saw a post of his prints with an FDM style (prusa mkii I think) and they looked incredible. I subbed to his patreon to get the files

Seems totally worth it!

Where did you find an stl? I have been looking for good anthem suits like crazy

Ryan Ray Long look up MarcLeptic on Patreon and CGTrader. He posted photos of his prints on the anthem subreddit, and I subbed to his Patreon to get the files.

Looks great!! My first print had SOOO much scaring and I'm still figuring out the proper way to do supports. Nice job!

I FORGOT THIS GAME

Where did this come from?

James Swan Anthem

How can we get the file?

Beauty! Keep up the good work!!

Dean Eyre look up marcleptic on Patreon or cgtrader

I mean the model

Good work freelancer! ?

How do you like it so far?

How much did the station set you back?

It only arrived today and it cost 159 plus another 37 in duties and taxes... ?

Jeff Spooner you on lock down too? I’m on day 1 of of 3 weeks. And almost out of resin. Amazon so backlogged from idiots buying toilet paper, I can’t get more for a week...

Jeff Greenfield I am just some cold symptoms and I have three bottles of Resin and lots of paint. It might go fast!

Mine just came as well - happy days

Mines just been delayed a month ☹️

Make sure you use 91 Ipa I only had 70 and this occured.

Lol that’s awesome . Did you make that or get it from somewhere ?

https://www.thingiverse.com/thing:4199390

not mine. found it

Google; flying stands, you'll find something that works for sure.

You know people are DYING from this virus, right?
Extra poof taste.

someone asked me for it.. so yea.i just went and did it.

Michael Yale wow, settle down there Marsha.

Michael Yale people die every minute of every day from a multitude of things. Including other related items that we print.

I wont print anything racist or homophobic, and i am not the first person to even print/post this.

I guess if you already got the virus you can’t get it again lol

I have a bunch of flying stands. Are you in the US?

Yea i am but I can print it

"Get on your bike and ride!" is Freddy Mercury's preferred method of making a thick bottom.

I'm damn sure I've seen flight stands etc for Xwing Armada and 40k on thingiverse.

Or perhaps, in a pinch, grab a Beholder stl from freespace and slice just the stand?

Did you say thick bottom?

yes i did

im corona riiiiiiick

Did you print it straight up or on its back?

Craft stores sell various woodworking pieces that would look good as a base. Take a clear pen apart and use that as a translucent stand. Or you could try using some wire to suspend it.

If you wanna cheap, use the cap from a milk bottle

just wanted to print it. the person who wants this wants to paint something on the base

Gregory Akin probably like $3.50 at michaels?

Alternatively you could let them figure it out for themselves. You did your part, if they want to do something crafty let them do the leg work

i like that..to bad i didnt price that into the print cost.. XD i only quoted the resin for a base. lol rip me

Gregory Akin like I was saying, let that be their hurdle. Buying a decorative piece of wood isn't why they enlisted you, and it's def not worth your time to go out of pocket to make them happy. Give them a milk bottle cap, or maybe print a base so you can add too your resin charge

the base was in the resin charge.. just the one that the model has is tiny

Or break apart an old trophy (I personally have zero) to mount it onto.

What's the commission price? Are they paying you more than $5?

$7+shipping

Was it an online sale as a vendor or just something among peers? I'm just curious if there are any terms you need to adhere to or could suffer the wrath of a poor review

to friends. im not really doing the vendor thing yet till i get more prints out.

Yea, try not to overthink it. Don't be like me! Haha I end up gluing people's prints together and priming things for them. It's a disservice to both parties.

im doing priming and thats all. its super easy just have to find the time to pime the uhh... 5 prints i have for buddies. im just glad they arent in a rush to get it..lol

All the while, it's good to brainstorm the right way to do it.

yea and you are helping.

I got my stand from a blood bond with my ancestor's body after he was possessed by a vampire in Egypt which caused my mother to become ill.

Print some hollow 3d printed custom stand and fill with some plasta

Why not just get a big round or square silicon mold from ebay and pour some resin in and then just uv cure
Faster than printing

Just give it a baby Yoda body and a Mandalorian helmet - then it would be perfect.

Print one

My contribution

that is eye of beholder

The beholder stand

Thingiverse has a bunch of them. Mia Kay Bentzien have so e nice decorative ones on her patreon and released to thingiverse as well

need to send it to the head of China...

I wish it was that big, so we could hunt for it ?

That's a bad LCD. I had a similar problem with my Photon Zero. ANYCUBIC after-sales support have sent me a new screen.

Daniel J Regan thanks for the response! I have already ordered a replacement but maybe I get a spare lol thanks for the information

Mine was DOA, and screens for the Photon Zero are not available for individual purchase. So support was my only option. Although I am worried because they mentioned they've sent a new 2K screen and the Zero only has a 480p screen. So time will tell. Haha.

Daniel J Regan best wishes!

Nice print, how many time you expose to the uv light?

I'm still new to this but I try and make sure to get 15 minutes on all surfaces

That’s bad ass

https://www.thingiverse.com/thing:2287089

Marcos Montano

awesome!

Very nice!!! What might be the plans for this beauty?

paint black and dry brush it with gunmetal with silver highlights and give it to a friend in exchange for him making a logo for by business.

Ken Cunningham nice!!! Share the paint job with us please.

I downloaded the model but it looks all low poly and stuff, not as smooth as your print, did you do something to it or will it just print like that?

Rodrigo Castelo Branco Mello Miranda just printed it

Alright, I'll try it tonight, thank you :)

3am tomorrow?

Yep. 3am on the 18th of March. So. EARLY.

Not so bad for people out in Cali. But I'll be fast asleep.

Neil Ramsay do you know what the discount is?

Not a clue in the world, I'm afraid. Could be $50. Could be $5. But if you're on the edge of picking up another one (or your first), it might be worth setting an alarm.

Neil Ramsay alarm set.

Let me know what the discount was. I'm curious. Not curious enough to wake up for it. But curious. ;)

its there now 70 off

Neil Ramsay picked one up at $220

220$ ? order my Photon 2 years ago, 2 L Anycubic Resin was included, pay only 235€ ? back in these days, there was no photon S and Zero, today I would order the photon s