ATOM 3D Printer Group 造訪社團 » 耗材 模組 副廠零件

本來在玻璃上就要上膠或者貼耐熱膠帶，比較不懂的是，玻璃表面光滑沒有東西幫助附著，不是會被噴頭刮走，如果是附著太緊，Z offset數值再加大一點點，因為第一層太低了

其實可以不用上膠什麼的
反到時第一層如果設很低的話成品會有一層很漂亮的鏡面底部我是很喜歡
我都是在印完後在作品底部周圍灑一點水 …… 查看更多

前文寫印過一捲、現在說印過兩捲，原主人就是這麼說，見諒。但機器狀況是看過確定新古機狀態，才推薦給痛友們的。
配上去的雷雕、機殼、熱床會是新品哦。

[幫推] 剛才看著ATOM構思著零件安裝配置的問題，就覺得ATOM設計的真的很美，然後就想到這個LOGO（覺得自己冷） ：
http://atomy-tw.weebly.com/....../46490101/1025628_orig.png

私

私

私\

佛心!!

私~

私~

私

私

@陳俊傑

陳俊傑

麻煩私訊喔！

我可以當有緣人嗎？

私

我可以當有緣人嗎？

麻煩私訊

GOT IT

私

私

請問價錢@@?

3萬

私

好奇~私~

私~

私

私

私

私

$

私

私

請pm ~謝謝～

ㄙ

私

到底多少錢可以大家一直私......

私訊～

私

感謝大家踴躍的"私" 我直接將價格補上瞜 謝謝大家

哈哈 辛苦啦

6/22 更新 老闆鐵了心要賣掉 29999 破盤價 只有一台!! 快來帶走他吧!!

我幫分享

請問有幫運送嗎？位於哪個縣市

好想買....先去彩券行一趟，等我XD

好划算！

有緣人若是台中人，想整理一下的話，蘋果橘子工房為您服務。;)

樓上！再報個客製機價錢給我吧

心動

心動，家裡放不下。XD

私私私私私私私私私私私私私私私私私私私私私私

能分期ㄇ~~~ 哈 哈XD

這價格超殺的~若能寄出就好了......

模組跟風扇沒關係啊.... 話說你的韌體是??? arduino 有用過? 如果沒的話應該是沒驅動!

怎樣才有驅動

Ftdi是什麼？

捉不到雷射頭的說法怪怪的，應該是連不到機台。

原來是這樣喔 ! 我之前要校正的時候，也是連不到機台

請問原廠的雷射功率是多少的 籃紫光嗎？

try this : https://atom3dp.squarespace.com/mechanical-problems-1/#head1
also when auto leveling slow down the speed to 10%...

Are you trying to print their test print stls or your own?

Also, the auto leveling works just like the instructional video?

https://www.youtube.com/watch?v=wEZZWE5xgHk

Ive been using this printer for 8 months with no issue! i know how to adjust the auto level screw!! this is a code issue... does anyone know of a customer support contact for Atom printers or do they just not care about thier product after selling it??

u can email to support@atom3dp.com.
also record a video for your problem.

I suggest not typing exclamation points to people trying to help you. It gives the impression you're yelling.

If it's a code issue, why would it be their (Atom's) problem then? That sounds like a problem in your g-codes. Do you have any old g-codes you know for a fact worked before you had this problem? Do they also too not work?

I agree - it sounds like GCode problem. Post the first 20 lines or so of GCode that results in the problem. That should tell the story.

ill try that next time!!!!!!

ill try and grab the code and post it on here tomorrow! thanks birk for the idea and help

Yinka im here to ask anyone if theyve seen this issue before!!!!!! i have tried old and new stl files, uninstalled and re-installed Cura many times with no avail! if you seriously have no constructive help or suggestions then bitching at me about excla mation points really isnt going to help! im frustrated with Atom for not setting up before manufacturing a product a customer service line for unknown issues like this one! i have every right as a consumer to be frustrated even though in the end it was my fault for purchasing this item!!!! and if it is a gcode issue then great ill jump on that troubleshooting first thing tomorrow but until then im on here asking for thoughts on fixing the issue, so if your not here to lend a hand just please keep it moving and keep your opinion to yourself

Ok, dude *sigh*

Use one of atoms test print stls and see if it happens still. If it does it's not a gcode problem

maybe your end stop sensor is broken.

Bryan Grude If you know how to use pronterface.
Try to send M503 command & get the result post it here.
Wondering if some setting abnormal in EEPROM .

Bryan Grude I understand your frustration about you shit not working properly. If you want anyone to help you stop behaving like a litte bitch and be polite. We are all makers and eager to help one an other. Now, have you tested with one of Atom's re ady made stl's? If this prints then it is not an issue with you printer. The issue is with your slicer/gcode writer. Please try one thing at a time and post your progress also the solution would be nice to hear about. Good luck.

guys, just bear him, i know that feeling when printer won't work.

Bryan - this kind of problem has been reported elsewhere a few times:

https://www.craftunique.com/forums/view-thread/1558

https://www.craftunique.com/forums/view-thread/1630

The end-stop sensor is not the problem - this sensor is not used during printing. In fact, once you have completed an Auto-Level (which does use the sensor) you could remove it and not know the difference.

he already quit this group.

well that is not a very smart move

What a baby...

so shame for find answer to help him.
he sent the mail to the Atom support.
i'll reply him and also explain about this group.
dont need to know chinese. just post the photo or video. that will be easier to solve issue.

Thx all. u guys so nice.

Birk I love your relentless dedication to solve problems. Thumbs up.

And just to make it clear. The Atom 2 is still the best out there. Happy printing!

要塗薄，太厚反而是反效果

聽某高手說把玻璃上的油擦乾淨

上白膠

要加熱床嗎

熱床不是解決黏不黏的問題

熱床 是減少快速冷卻翹邊對吧 但是要是底黏很緊 不加熱床 也不會翹不是嗎？ 總之我想了解最好的方案是什麼 塗白膠 加上熱床嗎 會不會變很緊 拆不下來？

只要不會翹，用啥都可以，黏得住就好
白膠塗完等它乾才能印，我使用上是超級緊，但稍微鏟一下就可以剝離，通常不會破壞到白膠又可以繼續印

先拿出來把婚禮小物印完...誤

早兩個月我就去你那搬了

心動...

外國的經驗，聽說好像是光線反射的原因，黑色紙比白色紙容易切割，厚一點點的可能多走幾遍可以切割出來，但這部分如何設定呢我還沒概念。我訂了atom的鐳射模組，遲一點組裝好會試。好希望切割到皮制品，雖然可能性好像不大。

1. 之前評估ＣＰ值，２瓦左右比較能處理這事，且成本不算太高。
2. 多少會有，但功率越大、對焦越準，那個會越小。