• #maker+t=market
  • COSPLAY 3D 建模
  • 3D列印服務
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » CLI

原文網址 Jon Roche
2019-07-10 14:49:59

Newbie here I’m afraid. Brand new printer arrived 2 days ago. Followed all the setup instructions and I seem to have a 3D printer that only prints in 2D! HELP!! All I’m trying to print is the test file that came with it - I’m presuming that the .photon file is setup ready to go. (I can’t see how to adjust any of the settings such as UV time)I’ve done the UV test with the paper and can see the light coming through as it should during a print. I’ve tried different resins but nothing seems to stick to the base!? I’m not hearing the popping or clicking noise either which I think might be the issue but not sure what to do? All advice greatly received....thanks!

翻譯年糕

Jon Roche
2019-07-10 14:50:51

Brandon Roscoe Diko
2019-07-10 14:52:19

Adam Nock
2019-07-10 14:52:30

Jon Roche
2019-07-10 14:53:37

Luke Hayes
2019-07-10 14:54:41

Sterling Murphy
2019-07-10 14:56:11

Alex Roughsedge
2019-07-10 14:57:00

Jon Roche
2019-07-10 14:58:00

Adam Nock
2019-07-10 14:58:54

Jon Roche
2019-07-10 15:00:13

Adam Nock
2019-07-10 15:04:48

Jon Roche
2019-07-10 15:08:19

Bob Deblier
2019-07-10 15:08:29

Jon Roche
2019-07-10 15:10:24

Adam Nock
2019-07-10 15:10:39

Bob Deblier
2019-07-10 15:10:46

Jon Roche
2019-07-10 15:11:21

Bob Deblier
2019-07-10 15:11:45

Bob Deblier
2019-07-10 15:12:18

Jon Roche
2019-07-10 15:12:42

Sterling Murphy
2019-07-10 15:13:32

Sterling Murphy
2019-07-10 15:14:27

Thomas 'Noodle' Didcote
2019-07-10 15:15:15

Bob Deblier
2019-07-10 15:15:29

Adam Nock
2019-07-10 15:19:24

Jon Roche
2019-07-10 15:25:41

Rob Young
2019-07-10 17:03:09

Bill Connelly
2019-07-10 17:15:49

Björn Ståhlnacke
2019-07-10 17:50:10

Jon Roche
2019-07-10 18:12:07

Dominick Trascritti
2019-07-10 18:12:29

Dominick Trascritti
2019-07-10 18:13:15

Bob Deblier
2019-07-10 18:22:45

Adam Harding
2019-07-10 18:23:32

Adam Harding
2019-07-10 18:24:08

Eric Wilfreesboro
2019-07-10 21:35:27

Sterling Murphy
2019-07-10 23:29:04

Eric Wilfreesboro
2019-07-10 23:36:54

Sterling Murphy
2019-07-10 23:58:47

Sterling Murphy
2019-07-10 23:58:55

Sterling Murphy
2019-07-10 23:59:28

Eric Wilfreesboro
2019-07-10 23:59:43

Jeremy Gilbert
2019-07-11 00:41:48

Jeremy Gilbert
2019-07-11 00:41:57

Chasen Harris
2019-07-11 00:47:29

Rob Young
2019-07-11 02:18:55

Damien Greysis
2019-07-11 02:28:17

Jamie White
2019-07-11 02:35:14

Daryl Allman
2019-07-11 04:08:28

Robert Fliege
2019-07-11 11:08:25

Rod Williams
2019-07-11 11:35:24

Stephen Farrell
2019-07-11 18:26:08

Mata Mac Gille Fhionntain
2019-07-12 08:12:36


原文網址 David Sedláček
2019-07-10 12:20:58

Hi Guys, PHOTON S: My very first print of the example model using a bundled resin, any idea what is the problem? The model isn't smooth and is deformed. The corner left in the VAT.

I heard "clicking" every move up- so it quite sticks to FEP and therefore deform the model or tear weaker parts apart?

I wonder how the uncured model like this can withstand such a "sunction" every move up? (Mine obviously couldn't)

翻譯年糕

David Sedláček
2019-07-10 20:46:17

Travis Berklund
2019-07-10 20:52:27

David Sedláček
2019-07-10 21:01:06

Travis Berklund
2019-07-10 21:01:36

David Sedláček
2019-07-10 21:01:38

David Sedláček
2019-07-10 21:02:24

Chris Medici
2019-07-10 21:48:11

David Sedláček
2019-07-10 21:51:40

David Sedláček
2019-07-11 17:17:13


原文網址 Will Shawcross
2019-07-09 18:31:29

SOS! I assume the “click” sound on later change isn’t normal. Can anyone assist?

翻譯年糕

Chris Inkk
2019-07-09 18:33:49

Will Shawcross
2019-07-09 18:34:40

Chris Inkk
2019-07-09 18:36:54

Will Shawcross
2019-07-09 18:37:17

Ethan Brown
2019-07-09 18:39:13

Chris Inkk
2019-07-09 18:39:42

Will Shawcross
2019-07-09 18:40:08

Chris Inkk
2019-07-09 18:40:26

Will Shawcross
2019-07-09 18:42:16

Arthur Withier
2019-07-09 19:12:09

Mike Ravn Bolin
2019-07-09 19:28:25

Mike Ravn Bolin
2019-07-09 19:28:37

Will Shawcross
2019-07-09 20:44:21

Will Shawcross
2019-07-09 20:46:08

Will Koehler
2019-07-09 20:52:56

Will Koehler
2019-07-09 20:53:45

Paulo Chiaradia
2019-07-09 20:56:40

Will Shawcross
2019-07-09 21:11:21

Daniel Kowalski
2019-07-09 21:12:59

Shawn O'Hara
2019-07-09 21:16:36

Paulo Chiaradia
2019-07-09 22:09:34

Paulo Chiaradia
2019-07-09 22:10:27

Daniel Kowalski
2019-07-09 22:30:34

Paulo Chiaradia
2019-07-09 22:33:42

Will Koehler
2019-07-09 22:34:14

Will Koehler
2019-07-09 22:35:05

Daniel Kowalski
2019-07-09 23:34:03

Daniel Kowalski
2019-07-09 23:56:39

Trea Cotton
2019-07-10 03:08:07

Will Koehler
2019-07-10 03:34:02

Will Koehler
2019-07-10 03:36:39

Paulo Chiaradia
2019-07-10 03:50:00

Will Koehler
2019-07-10 04:27:33

Will Shawcross
2019-07-10 04:35:37

Will Shawcross
2019-07-10 04:35:41

Will Shawcross
2019-07-10 04:35:54

Daniel Kowalski
2019-07-10 05:05:14

Eric Green
2019-07-10 06:10:48

Mika Vienonen
2019-07-14 19:51:35


原文網址 Tim Allen
2019-07-07 10:27:07

Eagle dropship from AW kickstarter (and likely Valkyrie proxy). Everything was pinned with paperclip pieces and held with 2-part epoxy. Almost everything is Phrozen ABS-like grey, with the center section in Siraya Blu.

翻譯年糕


原文網址 Richard Burrell
2019-07-07 01:28:13

So had my photon for 10 months and the z leadscrew grease was black gunk.
Cleaned and also redone the bearings in the rail as seemed to have loosened a bit over time.

Anybody else do this, or is the OCD clinic going to be calling me ?

翻譯年糕

Neil Ramsay
2019-07-07 01:30:22

Zena Andreou
2019-07-07 01:30:53

Richard Burrell
2019-07-07 01:38:34

Micah Vestal
2019-07-07 01:40:35

Jason Croft
2019-07-07 01:41:05

Zena Andreou
2019-07-07 01:49:08

Susan Sioux Mercer
2019-07-07 03:27:18

Richard Burrell
2019-07-07 03:31:29

George Bulte
2019-07-07 06:13:22


原文網址 Andrew Sutherland
2019-07-05 20:01:38

Another newbie question. And looking back through previous posts, this hasn't been answered completely so I'm a bit baffled.

Brand new printer and I plucked up the courage to try the test lattice print. Levelled fine, did the paper routine, pressed Z=0 and was asked if I wanted to continue. Pressed Yes but didn't get a beeped acknowledgement (Manual said to press OK but that wasn't an option).

Happy with that, I raised the Z axis to reinsert the resin vat, added resin and clicked on print. The Z did not move down into the vat to start printing but began where the build plate currently was. The build plate was so high out of the vat that I could see the shadow of the first base layer in the vat.

I've stopped the print and restarted with the build plate moved down into the vat so I'll see if there is any success but should I have to move the plate back down or should the printer move it to Z=0 at the start of the print ? Have I missed a step of prep ? As the file was on the USB, I assume that the GCODE has all the relevant preparation lines.

Thanks and looking forward to hearing from the

experienced so I can find out what the heck is happening :)

翻譯年糕

Scott Pavlich
2019-07-05 20:10:15

Andrew Sutherland
2019-07-05 20:35:13

Andrew Sutherland
2019-07-05 20:35:48

Scott Pavlich
2019-07-05 20:47:12

Andrew Sutherland
2019-07-05 20:54:14

Niall Forrester
2019-07-05 21:54:27

Niall Forrester
2019-07-05 21:55:18

Scott Pavlich
2019-07-05 21:57:12

Andrew Sutherland
2019-07-05 21:59:12

Scott Pavlich
2019-07-05 22:01:10

Andrew Sutherland
2019-07-05 22:44:31


原文網址 Chris Miller
2019-07-03 21:00:09

I bought a 250 count pack of paper paint strainer cones from Amazon but declined the optional 4 year warranty.

Was that a mistake?

翻譯年糕

Jeff Johnson
2019-07-03 21:02:49

Chris Miller
2019-07-03 21:20:05

Casey Gomez
2019-07-03 21:25:08

Robert Jeppesen
2019-07-04 00:11:15

Kamil Bartosz Bilski
2019-07-04 01:42:43

James Cachia-Garrett
2019-07-04 03:41:29

John Hunter
2019-07-04 04:03:16

Chris Miller
2019-07-04 08:02:09

Scott Pavlich
2019-07-04 11:37:10


原文網址 Joe Foulkes
2019-06-27 16:48:14

So I just replaced the motherboard and LCD on my photon and now I have the half screen issue. Tried power cycling the machine, updating firmware, using different USB's and reseating LCD cable. Any other suggestions?

翻譯年糕

Andrey Sabrev
2019-06-27 17:35:18

Joe Foulkes
2019-06-27 17:36:00

Andrey Sabrev
2019-06-27 17:37:14

Joe Foulkes
2019-06-27 17:37:59

Andrey Sabrev
2019-06-27 17:53:26

Andrey Sabrev
2019-06-27 18:09:21

Andrey Sabrev
2019-06-27 18:11:38

Joe Foulkes
2019-06-27 18:18:21

Andrey Sabrev
2019-06-27 20:25:33

Joe Foulkes
2019-06-27 20:26:02

Andrey Sabrev
2019-06-27 20:27:39

Andrey Sabrev
2019-06-27 20:30:14

Joe Foulkes
2019-06-27 20:34:25

Andrey Sabrev
2019-06-27 20:41:58

Joe Foulkes
2019-06-27 20:44:44

Andrey Sabrev
2019-06-27 20:48:35

Muhammad Zulkhairol Yacob
2019-06-28 03:23:41

Joe Foulkes
2019-06-28 03:38:39

Muhammad Zulkhairol Yacob
2019-06-28 03:39:32

Joe Foulkes
2019-06-28 03:40:07

Adam Musgrove
2019-07-18 10:35:15

Joe Foulkes
2019-07-18 13:46:04


原文網址 Ron Borchert
2019-06-26 22:54:19

Hey guys, I have had my printer a week now and completed about 3 prints. I just started running into an issue where the printer will put down the first layer then restart. I have tried a new usb and rescliced the model. Am going to try a different model next. I am looking for some advice on this issue.

翻譯年糕

Puren Bulat
2019-06-26 22:56:29

Ronan Tully
2019-06-26 22:58:55

Danny Lloyd
2019-06-26 22:59:21

Puren Bulat
2019-06-26 23:00:02

Mark Wardle
2019-06-26 23:00:32

Jean-François Meloche
2019-06-26 23:01:28

Jean-François Meloche
2019-06-26 23:02:04

James O'Keane
2019-06-26 23:05:23

Ron Borchert
2019-06-26 23:12:06

Ron Borchert
2019-06-26 23:12:37

Ron Borchert
2019-06-26 23:12:51

Ron Borchert
2019-06-26 23:13:31

Mark Wardle
2019-06-26 23:13:51

Ron Borchert
2019-06-26 23:14:06

Ron Borchert
2019-06-26 23:16:30

Jean-François Meloche
2019-06-26 23:17:30

Ron Borchert
2019-06-26 23:18:19

Jean-François Meloche
2019-06-26 23:18:42

Ron Borchert
2019-06-26 23:19:58

Marc Hobden
2019-06-26 23:44:35

Mark Wardle
2019-06-26 23:47:13

Ron Borchert
2019-06-26 23:48:41


原文網址 Çağrı Aydoğan
2019-06-25 22:22:39

i post this by request of Vinicius Silva

This is Creality LD-001 resin printer recently we bought for resin testing. it has some great features.

-wifi (you enter ip on your browser and you can upload and start printer through you browser)

-lcd changing is very easy. there is metal frame over lcd with 4 screws and on the left side of the printer there is cover to remove cable. i realy liked it how easy they made changing lcd

-it uses slicer called 3d creator slicer. i didnt use much but it looks terrible.

-after you slice the file when you click print it asks you bottom exposure time and normal exposure time. in some cases this is good

-when you place the vat over the screen it dosent have place to fit so you need to check if it fits good or not. (they need to fix this)

-build plate has mat surface glass. i dont know if its good or not yet. i made only one print and it was very easy to remove comparing to photon. it gives idea that wont hold big prints. i will print something big and see if its good or not

-leveling was easy. no need to adjust any z=0. just home the z axis and tighten for screws

-so far only one print made and result was good.

-3.5 inch screen seems better than photon.

-it uses rasperry pi board

翻譯年糕

Juan Carlos Ramirez
2019-06-25 22:29:09

Jarrod Smith
2019-06-25 22:36:44

Çağrı Aydoğan
2019-06-25 22:38:23

Çağrı Aydoğan
2019-06-25 22:38:55

Milton Maxson
2019-06-25 22:40:02

Jarrod Smith
2019-06-25 22:43:30

Milton Maxson
2019-06-25 22:44:11

Jarrod Smith
2019-06-25 22:44:40

Rick Denny
2019-06-25 22:45:13

Çağrı Aydoğan
2019-06-25 22:45:36

Vinicius Silva
2019-06-25 22:47:06

Milton Maxson
2019-06-25 22:50:15

Milton Maxson
2019-06-25 22:51:14

Stephen Ross
2019-06-25 22:54:01

Jarrod Smith
2019-06-25 22:54:18

Çağrı Aydoğan
2019-06-25 23:01:10

Milton Maxson
2019-06-25 23:01:40

Giannis Andronkidis
2019-06-25 23:36:37

Andrey Sabrev
2019-06-25 23:54:50

Çağrı Aydoğan
2019-06-25 23:55:39

Ricardo Ribeiro
2019-06-25 23:55:53

Çağrı Aydoğan
2019-06-26 00:01:15

Çağrı Aydoğan
2019-06-26 00:01:44

Daniel Velarde Kübber
2019-06-26 00:14:32

Ricardo Ribeiro
2019-06-26 00:34:24

Philippe Maegerman
2019-06-26 00:57:36

Brent Stevens
2019-06-26 01:54:06

Çağrı Aydoğan
2019-06-26 01:58:40

Eric Wilfreesboro
2019-06-26 02:12:20

Çağrı Aydoğan
2019-06-26 02:33:11

Brent Stevens
2019-06-26 02:44:24

Vinicius Silva
2019-06-26 02:55:38

Brent Stevens
2019-06-26 03:12:59

Christopher Botha
2019-06-26 04:08:59

Christopher Botha
2019-06-26 04:13:46

Christopher Botha
2019-06-26 04:17:17

Çağrı Aydoğan
2019-06-26 04:45:28

Michael Ohl
2019-06-26 04:46:22

Çağrı Aydoğan
2019-06-26 04:48:13

Stuart Radmore
2019-06-26 04:56:37

Ron Luttrull
2019-06-26 05:16:15

Benny Lu
2019-06-26 06:46:02

Vinicius Silva
2019-06-26 06:46:30

Vinicius Silva
2019-06-26 11:43:27

Andrew Gott
2019-06-26 12:50:50

Çağrı Aydoğan
2019-06-26 22:45:21

Gary Houser
2019-06-28 02:44:24

Çağrı Aydoğan
2019-06-28 02:45:55

Gary Houser
2019-06-28 02:46:43


 

全不選 發文排行