Anycubic Photon Printer Owners 造訪社團 » STL

I can certainly do accessories for you. I've done a whole load of wargaming scale weapons you can check out on my thingiverse profile. https://www.thingiverse.com/MonstrousMakings/designs

If you are interested and want to talk more then please message me at my page ( https://www.facebook.com/MonstrousMakings/ )

PM sent

Kenner star wars accessories

Think you may find these already online if you look enough

Surprisingly, none that I've been able to find.

Hummmm a gap in the market! Rare indeed

Hi, I PMd your page as you said. Still havent heard back though.

Jason Cartwright hi Jason, I've had a busy day but I'm going to reply shortly.

Holy Crap. War Rocket Ajax!!

Needs a Ming impaled on the front :D

i like but i'd have a plug/rod to semi lock in place last thing u want is a small knock and it all on floor

yes please

I'd be interested too

I'd modify it so you could use a similar screw to the normal build plate XD

yea just to keep in place

stl pls

wouldn't be hard to make ya own

pretty usefull actually

something else I didn't know I wanted

that seems super handy!

Awesome!

I'd use it

I'd use that. I'd also echo one of the above comments about tapping a screw hole to use the one that comes stock.

Is this meant to be printed in resin or FDM? Depending on the answer, I might have a design suggestion.

Yes!

Useful!

Genius! I never thought about this haha

Good idea but how much resin would you need to save to make up for the print? Also a little worried as resin can break easily, unless of course this is to be printed on an fdm printer. Nice idea though.

Stevo Hill you're very right I just got lazy and didn't want to cut threads. But the knob screw is an M6 for anyone interested. I figure that the last bits of a bottle won't be too messy if the spill ?

Justin Lincoln you're very right I just got lazy and didn't want to cut a threaded hole, I'll accept the ramifications ? but the bottle I used to demo is half full, and I figure if you're draining it there isn't much left anyway

Yes please. I’ll make it FDM though ?

Josh Berkley I might honestly use this to just siphon bottles into other bottles, for when I finally make my "Franken" Resin

Shawn O'Hara I printed in SLA so I didn't have to use supports and for a more accurate fit on the post. But all ears on that suggestion either way as I do have an FDM printer (that needs tinkering to run again)

yea i get just was my 2cents worth :P

Colin Hughes I printed it on my SLA machine. After curing it's quite strong. The large bottle in the photo is about half full. If you're using this I imagine there isn't much left in the bottle at all so very light

Robert Maefs my FDM printer is currently down and I'm impatient. That's about the gist of it haha

Justin Lincoln I mix all the time. Part of the fun!

Josh Berkley we do what we can with what we have!

As log as its not the last of your first bottle :p

Thanks love the idea

Josh Berkley Fair. I can tell it's resin and looks super clean, but I think this application is more suited to FDM overall. Cheaper, arguably faster but that's pretty moot. I'd think it has less of a chance to break than resin, but again, depends on the resin vs the weight of the bottle.

Anyways, the suggestion is that for those who want to print in FDM, the bottom should be totally flat. It might already be, but I can't tell if it tapers upwards from the mount to the disc or not. Printing in FDM in the orientation it's designed to function in will give the largest cross section of layers and therefore be strongest in that orientation during the printing.

Count me interested for when i eventually get my first resin printer

Chris Denyer best purchase I've made in a long time

Shawn O'Hara that makes total sense. Being that I printed in resin I wasn't so concerned about horizontal and more about vertical continuity, so I designed only considering that. It does in fact taper upward slightly

I ordered the zero (got it for 99) but i guess they are on backorder

Josh Berkley That's a valid point, at 3am my brain is fried from children keeping ne awake lol, of course an empty bottle is light. Duh!

I will see how this develops with the ideas of a securing screw etc.

Thanks

Colin

Chris Denyer I want one very badly but I currently have two photons. Hoping to add that and a wash/cure station to my arsenal soon

Colin Hughes the screw used on the photon build plate is an M6, I didn't feel like cutting a threaded hole but it is definitely possible. I hope someone improves my design!

Josh Berkley I'm interested in the wash and cure as well in the future but kinda already spent all my tax money lol. Originally I was going to get a Mars or a photon but then i saw the mars pro was coming out so i was just going to wait for that since i had most of the money. Then someone mentioned something about the new Zero and at first i wasn't interested but when i got a $70 off coupon i got more interested and it left me money to buy something else I've been wanting for a while (ps4 with spiderman and the new ff7 remake)

Chris Denyer I have Spiderman as well fantastic choice. The zero is very interesting to me, higher anti aliasing with only small sacrifice to build size and much more affordable

Josh Berkley I've seen videos, the reviews and watched my son play it, when we were visiting home, on my brother's machine. Can't wait for it to arrive this week.

I'll take 20.

Joe Iovino

This for an Epax x1 please

Hahahah nice work!!!

Definitely interested.

Great idea!

Chris Thiessen I wish I had that many printers!

Please post!

And when bored during quarantine, dip it into the resin and blow bubbles!!

No don’t do that lol

lol

Sean Smith it doubles as a bubble wand for the kids ?

under UV light.

That looks like it costs far more resin than it will save.

just fdm it

James Smith the entire print was about 40mL. Not too costly. Also it's more because I don't feel like standing there holding the bottle ?

Josh Berkley ?

I would definitely use something like this.

I have uploaded the files as well as solidworks models to thingiverse https://www.thingiverse.com/thing:4238586

200 IQ

sometimes the simplest ideas are the best ones :)

Si recupera nel tempo meno resina di quanta ne sia servita per stampare il supporto bottiglia

Yes please!

Yes... This is perfect. I'm tired of balancing the bottle or a plastic cup til it empties.

Nice

Cool

Why not just download the bottle to bottle adaptor? Empty the resin in one bottle then use when about to print. Waiting for ax bottle to drain into your vat seems really inconvenient.

not when iam trying to get every drop i can for a print , this would save me time holding the bottle waiting

Stevo Hill https://www.thingiverse.com/thing:3761273

but i dont want it in another bottle i'd want it in the tray

404 error on this file.

James Turner like most things on Thingiverse these days

You should have added a small twist to it, that way the resin would gather to one point and fall easier.

Dávid Pelyva not a bad idea, what I have been doing is just offsetting the bottle in the ring, the is actually a concave lip around the inside that allows you to do so

Hobbie Gus Gus the only time you'd be draining in this manner would be to ensure you're using an entire bottle at it's end when there isn't much left. Why would you put such a small amount in a second container when you can just utilize it in the machine

Josh Berkley I just collect the remaining into 1 bottle. Since I use enough of the same resin, it works for me. I have 7 machines running 24/7.

Josh Berkley because you can fill your vat and start a new print, then use this to get every last drop into your newly opened bottle. You don't have to do it into an empty bottle. That's just silly.

And the best part is, you aren't losing print time. I didn't spend $200 or more for a bottle drip stand... I spent the money for a 3D printer.

Paul West To each his own, I don't have time to wait for a bottle to drip empty. Time is money and I start prints ASAP to fill orders.

Hobbie Gus Gus I'm with you 100%... I think hanging it on the printer is just plain silly. Thankfully, what others choose to do with their printer(s) doesn't impact what I do with mine.

Jesper Hvid True, and the website redesign is slow as my grandmother running the 100m dash. (hint she can't because she passed 10 yrs ago RIP).

Hobbie Gus Gus well this part clearly wouldn't be useful to you ?

What about modifing it so work with this stand for the vat tray? https://www.thingiverse.com/thing:3841061......

I'll look into it

Following

Josh Berkley I cannot download it....

Marcin Stolarek it had given me a lot of problems I'll look at it again

Marcin Stolarek first upload so I apologise

Download on thingiverse finally working. Sorry everyone!

https://www.thingiverse.com/thing:4238586

So cartoony

When post-curing, do you cure both sides or only the top?
Cured resin shrinks. When the top of the wing cures faster than the bottom it could curl up due to different states of the resin.

Shrinkage.

Thanks Sander van Deijl , I'll give the next batch a curing from beneath and see if it changes things.

Peter Martin where did you get those stl files? :P

Print them vertically. I had it with gun barrels. The already cured layers shrink away from the new layers. If you print vertically this has little effect

Aerodynamic stress on the wings when flying.

Try curing both sides of the wing the same amount?

had similar issues with zeros. so thin...

I knew 5G pulling in a Ju-52 was asking for trouble!

That's a great solution, thanks!

The Ju-52 is Thingiverse, the Potez 631 is my own model. PM me if you want a copy :)

Exactly my thoughts :D

Peter Martin good way is to cure in water as helps to hit all sides at once refraction in the water and such

Curing too fast? Use some form of turn table nose down. Cure slower move light source away more

try curing them with the support attached? might keep everything lined up

If I had to guess, I'd say the top and bottom of the wings are doing final cure at different rates, which is causing the resin to expand/contract on one side at a different rate than on the other, which is warping it.

It’s just dihedral ?

It wasn't there when I sculpted it! ?

I was just joking with you. I have no clue. Just started 3D printing 3 days ago lol. ?

I would try to cure it on water bath.

Our a mirror /tin foil underneath.

Jonathan Perdomo you beat me to it!!

To be fair, it looks great, make the planes wings look like they are under a taxing load. Wing flex is a real thing for these craft.

Richard Humble 60deg worked for me when 45 kept producing curls

Is impossibile to download

cool thank you

So sorry to hear that. Stay safe.

Sorry to hear! all the best and quick recovery!

Get well soon

We wish your artist and everyone else afflicted with a speedy recovery

Hope the artist makes a quick recovery. Hope the family is ok stay safe everyone

Prayer to the family. That being said, link doesn't work,

too many hits. try later.

Praying for the artist and his family and I have the thrall printing as we speak. It was wonderul you guys did this in the artist honor. It's a beautiful sculpture.

James Teagle ?

Get well soon!!

Amazing warewolf. Our prayers and good wishes for your team from Australia

Sorry to hear that. Hope hi get well soon!

Konstantinos Martinos ?

Access denied ?

Both files are compatible using fw 5.*

awesome, thank you!

Erivelton Silva They are not using the newest fw.
They used to work. Then stopped working. Then beginning fw 5 they worked again and now they don't. That's why all the contradicting information.

Rik de Reus So with the latest firmware from the official website it's not working anymore?

Mi Ha correct. It's not working for me with the lastest fw from the Anycubic website.

Rik de Reus , I'm using V5.02 with my Photon (not S) and .pws and .photon working normaly. Is there any difference between the S version and the common version?

I just checked on mine and it's kinda random. Sometimes the .photon files show up and sometimes they don't. This is on 5.0.2 also.

Very strange .... for me, until now, the files generated by chitubox have always appeared.