Anycubic Photon Printer Owners 造訪社團 » ABS

原文網址 Niall Forrester
2020-02-23 23:56:04

So I decided to play with my exposure settings a bit, and came up with some interesting results.I'm not trying to persuade anyone of anything here, and I feel obliged to point out that this is only done with one resin, and there are other factors (cleaning, post-curing etc.) that can have had some impact to., so my conclusions may not necessarily be relevant to everyone.

Anyhoo, the things that stood out most to me were:

1) This resin works pretty well across the range of exposure times, it is not 'that' sensitive.

2) 0.02mm layers actually gave slightly worse detail than 0.05mm layers, for this combination of resin, model etc.

3) I feel that 9s exposure for 0.05mm was best, compared to 8s at 0.02mm layers - i.e. very little difference. I didn't try 0.02 at 9s, but maybe that would have been better than 8s

4) In order to get some small positive details to show up (the spikes on the top), I had to choose settings that over-exposed other parts of the model. So there is no 'perfect' exposure time.

I have attached a few photos showing comparisons, for anyone who is interested. The STL is the Ameralabs calibration town (I'll put in a link), and the resin is PrimaCreator Value Grey. I printed 4 of these at a time to ensure the variations were not too random. My apologies for the slightly fuzzy picturees in some cases (the details are small and I cannot find my macro adapter, plus I was too lazy to go back and repeat photos of the worst ones ;o)

This first photo shows the difference between prints at 0.05mm ranging from 8s to 12s exposure time. I have previously been using 12s as my standard time for this resin at this layer height and have been happy with the results, but I am going to drop to 9s from now.

所以我決定玩一下我的曝光設定, 並產生了一些有趣的結果. 我沒有試圖說服任何人, 我不得不指出, 這只是用一種樹脂完成, 還有其他因素(清潔, 治癒後治療等)可以產生一些影響., 所以我的結論不一定與每個人相關.

不管怎樣, 我最突出的是:

1)這種樹脂在曝光時間範圍內運作良好, 並不是"那麼敏感.

2) 0.02 mm層實際上給出的細節比0.05 mm層稍微差一些, 對於這種樹脂, 模型等組合.

3)我覺得9秒曝光最好, 而0.02毫米層的8 s曝光最好也就是說差別很小. 我在9年代沒有嘗試過0.02, 但也許那會比8年代更好

4)為了獲得一些微小正面細節出現(頂部的尖峰, 我不得不選擇模特其他部分曝光的設定. 所以沒有"完美"曝光時間.

我附上了幾張比較的照片, 給有興趣的人. Stl是ameralabs校准鎮(我會放入連結), 樹脂是原始的價值灰色. 我一次列印了4個, 以確保變化不會太隨機. 我對有些情況下有點模糊的照片道歉(細節很小, 我找不到我的宏觀介面卡, 而且我太懶惰, 無法回去重復最糟糕的照片 ;o)

這張第一張照片顯示的是0.05毫米的指紋之間的差別, 從8秒到12秒之間. 我以前一直在這層高度使用12 s作為標準時間, 對結果感到滿意, 但從現在開始下降到9 s.

· 查看原文 · 為此翻譯評分

Niall Forrester
2020-02-23 23:58:07

Niall Forrester
2020-02-24 00:01:00

Niall Forrester
2020-02-24 00:03:52

Richard Shapiro
2020-02-24 00:04:27

Will Pattison
2020-02-24 00:06:40

Niall Forrester
2020-02-24 00:06:41

Scott Pavlich
2020-02-24 00:08:19

Scott Pavlich
2020-02-24 00:10:51

Niall Forrester
2020-02-24 00:11:30

Niall Forrester
2020-02-24 00:14:52

Nipuna Gunarathne
2020-02-24 00:15:14

Niall Forrester
2020-02-24 00:16:27

Omiko Mushkudiani
2020-02-24 00:21:22

Robert Maefs
2020-02-24 00:26:44

Will Pattison
2020-02-24 00:36:31

Niall Forrester
2020-02-24 00:43:00

Yüksel Yazıcıoğlu
2020-02-24 03:14:10

Niall Forrester
2020-02-24 03:50:52

Yüksel Yazıcıoğlu
2020-02-24 18:58:54

原文網址 Alex Nadalini
2020-02-21 20:14:04

Resin exposure tests are interesting, I ran a photon resin calibration test, if I'm reading it correctly the sweet spot seems to be between columns 6 & 7 (12 -14 seconds), yet when I ran the Ameralabs Town Calibration prints I much prefer the 8sec exposure - the details just seem so much crisper, thanks for the heads up on this Frank Martinez Jr

樹脂曝光測試很有趣, 我做了光子樹脂校准測試, 如果我讀錯的話, 甜點似乎在6和7欄(12秒)之間, 但當我跑步時 Ameralabs鎮校准指紋, 我更喜歡8秒曝光-細節看起來非常嚴謹, 感謝大家關注這個

· 查看原文 · 為此翻譯評分

Ian Phemister
2020-02-21 20:17:11

Alex Nadalini
2020-02-21 20:17:47

Mike Armijo
2020-02-21 20:18:25

Bob Deblier
2020-02-21 20:21:12

Alex Nadalini
2020-02-21 20:30:35

Alex Nadalini
2020-02-21 20:30:39

Alex Nadalini
2020-02-21 20:31:40

Bob Deblier
2020-02-21 20:33:01

Mike Armijo
2020-02-21 20:33:27

Alex Nadalini
2020-02-21 20:42:54

Frank Martinez Jr
2020-02-21 21:13:18

Arminas Didziokas
2020-02-21 21:34:02

Alex Nadalini
2020-02-21 21:45:36

Pierre Eichel
2020-02-21 22:05:05

Janus Stark
2020-02-21 22:17:29

Alex Nadalini
2020-02-21 22:23:19

Chris Rees
2020-02-21 22:35:39

Niall Forrester
2020-02-21 22:51:39

Alex Nadalini
2020-02-21 23:30:13

Alex Nadalini
2020-02-21 23:33:09

Alex Nadalini
2020-02-22 18:47:36

Alex Nadalini
2020-02-22 18:49:33

原文網址 Paul Metcalfe
2020-02-21 19:29:54

Hi Folks,
Sorry to bother people again, but I'm after some advice with this printer. I've recently got the Photon S, and after two weeks of printing, I still don't have what I would call a satisfactory print. I've followed guidance from these Photon Groups on Facebook (being careful to distil the info between those posting about the Photon and the Photon S), and i'm still finding relatively dissapointing prints, where I cannot get clear detail, as reducing the exposure is increasing warp, and increasing exposure is causing the parts to be oversize. Its literally down to a window of a second or two, and at either end of the window I seem to be getting extremes of the effects.

Specs,

Anycubic Photon S

Elegoo Mars ABS-like Grey Resin.

Slicer- Chitubox (medium supports, using the auto function, with some removed/replaced with better cantilvers

Layer height 0.02mm

Bottom layer count 10mm

Exposure time 8.25s (m/c rounds to 8.3)

Bottom Exposure 50s

Light-off delay 6.5s

Bottom light-off delay 0s

I've run a photon S exposure test, and although rather subjective, it indicated an exposure time of around 6s. Firmware is v5.02

The last two prints were as follows. The diesel shunter (see attached pics), 6.5s exposure printed at an angle (nose end up) at 30 degrees, the surfaces and detail were pretty good, but it was parallelogram-ed, leaning back towards the cab. The following print, I put two of the shunters on, one flat in its "normal" orientation, and the other with it stood up on the back of the cab, 8.25s exposure, the engines have ended up very different dimension-ally, and were from identical cad. Each loco is out in a variety of directions/dimensions, but anywhere from 1 to 2mm, in either length, width or height.

So I'm just wondering if anyone has any guidance, as to where I'm going wrong, as these prints and the printer itself aren't of any use to me if they can't print anywhere near remotely accurately. They’re supposed to be able to achieve better than +\-2mm surely.

翻譯年糕

Niall Forrester
2020-02-21 19:47:36

Matt Wickham
2020-02-21 19:50:09

Rob Brzez
2020-02-21 19:51:41

Paul Metcalfe
2020-02-21 19:54:22

Paul Metcalfe
2020-02-21 19:57:45

Paul Metcalfe
2020-02-21 19:58:43

Matt Wickham
2020-02-21 20:08:32

Rob Brzez
2020-02-21 20:11:09

Paul Metcalfe
2020-02-21 20:11:43

Matt Wickham
2020-02-21 20:20:23

Paul Metcalfe
2020-02-21 20:25:10

Matt Wickham
2020-02-21 20:38:28

Paul Metcalfe
2020-02-21 20:42:41

Paul Greenland
2020-02-21 21:37:23

Paul Metcalfe
2020-02-25 00:42:08

Niall Forrester
2020-02-25 01:14:38

Paul Metcalfe
2020-02-25 04:32:35

原文網址 Jerry Doyle
2020-02-21 15:46:31

1/100 scale German 88mm Pak 43 anti tank gun for Flames of War game printed on my Photon Elegoo ABS resin; 4 bottom layers @ 100 seconds, layers @ 10 seconds; .05 layers...

翻譯年糕

原文網址 Jared Kauffman
2020-02-21 01:42:57

Anyone else have some issues with elegoo abs white? Clear red has been much more consistent. So I ended up mixing clear red with white in a 50/50 mix and it turned out great! (On new upgraded photon)

翻譯年糕

Chris Evans
2020-02-21 01:48:44

Wes Mischke
2020-02-21 02:41:26

Jared Kauffman
2020-02-21 02:54:46

John Simpson
2020-02-21 05:50:29

原文網址 Vera Ermakova
2020-02-20 19:36:57

Good day to all!

For my fantasy creatures, I create eyes using 3D printing.

This technology allows many interesting experiments with textures, the game of highlights and shadows. It gives a very beautiful result, thanks to the complex relief under the lens, reveals the effect of depth and anatomical structure of the eye.

To create a lens, I use Model Clear from # HARZLabs . It gives very good optical transparency for both small and large lenses. In addition, it does not react with the solvent-based paints that I use, including Tamiya metallics which are quite sensitive to topcoats. This allows you to experiment with painting, not to lose the luster and saturation of colors.

The embossed base is printed on AMD-3 Custom Black from AmeraLabs. A beautiful, charcoal black color creates an interesting effect on the pupils of the eyes.

___________________________________________

# fantasycharacter # croc # crocs # fantasyart # svetoten # clearHARZLabs # ModelClearHARZLabs #harzLabs #HARZLabs # AmeraLabs #AMERALABS # interiorart # decoratie # artobject # resincrystal # fantasycrystal # interiordoll # fantasylamp # nightlamp # nightlight # fantasynightlight # 3dprinting # 3d # 3dart # 3dprint # 3dsculpt

翻譯年糕

Andrew Adamov
2020-02-20 19:38:40

Anh Hoàng
2020-02-20 19:39:39

Vera Ermakova
2020-02-20 19:39:44

Daniel Eld
2020-02-20 19:39:56

Vera Ermakova
2020-02-20 19:39:58

Vera Ermakova
2020-02-20 19:40:36

Neil Ramsay
2020-02-20 19:40:59

Vera Ermakova
2020-02-20 19:43:44

Neil Ramsay
2020-02-20 19:47:29

Rob Brzez
2020-02-20 19:49:56

Troy Tepes
2020-02-20 19:50:54

Brian Wulff
2020-02-20 20:02:07

Vera Ermakova
2020-02-20 20:02:17

Rastko Stanojevic
2020-02-20 20:02:58

Vera Ermakova
2020-02-20 20:03:48

Vera Ermakova
2020-02-20 20:04:32

Szabolcs Matefy
2020-02-20 20:04:33

Rastko Stanojevic
2020-02-20 20:05:12

Rob Brzez
2020-02-20 20:05:46

David Collinson
2020-02-20 20:06:38

Andrew Phipps
2020-02-20 20:06:40

Gary Noble
2020-02-20 20:08:37

Vera Ermakova
2020-02-20 20:10:39

Vera Ermakova
2020-02-20 20:11:04

Vera Ermakova
2020-02-20 20:14:54

Rob Brzez
2020-02-20 20:15:33

Szabolcs Matefy
2020-02-20 20:16:35

Vera Ermakova
2020-02-20 20:18:40

Szabolcs Matefy
2020-02-20 20:19:52

Doug Bowman
2020-02-20 20:24:36

Jarrod Woolley
2020-02-20 20:27:47

Kristy Ancheta
2020-02-20 20:38:43

Joseph Bochinski
2020-02-20 20:50:11

Jackie Sparrow
2020-02-20 20:50:14

Ozymandias Zambrano
2020-02-20 20:59:19

Ben Wood
2020-02-20 21:03:40

Vera Ermakova
2020-02-20 21:05:03

Luis Jurado
2020-02-20 21:27:33

Alexander Bayerdorffer
2020-02-20 21:34:20

Mike Chess
2020-02-20 21:38:46

Joe Garry
2020-02-20 21:41:24

Vera Ermakova
2020-02-20 21:49:41

Vera Ermakova
2020-02-20 21:51:16

Alexander Bayerdorffer
2020-02-20 21:51:44

Vera Ermakova
2020-02-20 21:54:48

Dylan van der Erve
2020-02-20 21:55:21

Htun Nay Myo Aung
2020-02-20 21:56:42

Vera Ermakova
2020-02-20 21:59:50

Carrie Nabors
2020-02-20 22:22:23

Joe Garry
2020-02-20 22:34:20

Ryan Ray Long
2020-02-20 22:38:26

Deidre Whiteside
2020-02-20 22:42:07

Alessandro Fonseca
2020-02-20 22:43:28

Erdian Madskin
2020-02-20 22:45:17

Nick Van Oort
2020-02-20 22:57:28

Vera Ermakova
2020-02-20 23:00:46

Aleksey Kulagin
2020-02-20 23:05:03

Alessandro Fonseca
2020-02-20 23:07:56

Franyely Montiel
2020-02-20 23:18:44

Vera Ermakova
2020-02-20 23:20:16

Vera Ermakova
2020-02-20 23:21:21

Michael Power
2020-02-20 23:28:07

Cannon Rigger
2020-02-20 23:35:42

David Bock
2020-02-20 23:39:47

Shawn Atlas
2020-02-20 23:40:24

Игорь Борцов
2020-02-20 23:42:31

Dario Alterini
2020-02-20 23:43:18

Erdian Madskin
2020-02-20 23:45:43

Niall Forrester
2020-02-20 23:52:42

Андрей Шестаков
2020-02-20 23:56:14

Андрей Шестаков
2020-02-21 00:00:47

Андрей Шестаков
2020-02-21 00:02:38

Ekaterina Vitalyevna
2020-02-21 00:02:49

Dario Alterini
2020-02-21 00:07:30

Mark Tittensor
2020-02-21 00:19:34

Aleksey Kulagin
2020-02-21 00:47:13

Alessandro Fonseca
2020-02-21 00:48:28

Toni G. Damjanić
2020-02-21 00:49:23

Aleksey Kulagin
2020-02-21 00:50:48

Aleksey Kulagin
2020-02-21 00:53:15

Alessandro Fonseca
2020-02-21 00:53:50

Игорь Борцов
2020-02-21 00:59:56

Игорь Борцов
2020-02-21 01:00:51

Franyely Montiel
2020-02-21 01:02:48

Franyely Montiel
2020-02-21 01:02:53

Aleksey Kulagin
2020-02-21 01:03:12

Franyely Montiel
2020-02-21 01:04:56

Андрей Шестаков
2020-02-21 01:06:28

Erdian Madskin
2020-02-21 01:15:01

Erdian Madskin
2020-02-21 01:15:41

Eddie Chamberlain
2020-02-21 01:36:03

Vera Ermakova
2020-02-21 02:15:32

Guifré Ibarz
2020-02-21 02:25:41

Carrie Nabors
2020-02-21 02:27:32

Alvaro Rodriguez
2020-02-21 02:31:14

Cannon Rigger
2020-02-21 02:31:31

Vera Ermakova
2020-02-21 02:34:28

Bert Fegg
2020-02-21 02:34:28

Drew Pickard
2020-02-21 02:56:03

Vera Ermakova
2020-02-21 02:59:31

Drew Pickard
2020-02-21 03:10:14

Vera Ermakova
2020-02-21 03:12:59

Jakob Martens
2020-02-21 05:43:09

Vinicius Silva
2020-02-21 05:50:01

Vera Ermakova
2020-02-21 05:57:33

Vinicius Silva
2020-02-21 05:59:25

Aleksey Kulagin
2020-02-21 06:03:11

Vera Ermakova
2020-02-21 06:09:22

Matteo De Donatis
2020-02-21 06:31:49

Atom AK
2020-02-21 13:46:42

Atom AK
2020-02-21 13:48:55

Ivan Lobachev
2020-02-21 13:52:14

Claire Crum
2020-02-21 14:01:04

Lee Darcy
2020-02-21 17:36:57

Vera Ermakova
2020-02-22 03:14:32

Ryan Ray Long
2020-02-22 03:20:40

Vera Ermakova
2020-02-22 03:21:25

Vera Ermakova
2020-02-22 03:23:45

Vera Ermakova
2020-02-22 03:24:11

Vera Ermakova
2020-02-22 03:25:48

Jonathan Nunes
2020-02-22 06:45:21

Dalton West
2020-02-24 12:02:30

Vera Ermakova
2020-02-24 15:59:07

原文網址 David Voracek
2020-02-20 01:50:25

So newby to this group and debating photon or abs printer. Photon seems like more safety issues and more to deal with. So why photon?

翻譯年糕

Adam Widdowson
2020-02-20 01:54:23

Peter Plass
2020-02-20 02:56:14

Adam Widdowson
2020-02-20 03:47:19

Peter Plass
2020-02-20 03:48:31

Adam Widdowson
2020-02-20 03:53:55

Peter Plass
2020-02-20 03:56:36

Adam Widdowson
2020-02-20 03:58:54

Adam Widdowson
2020-02-20 03:59:09

David Voracek
2020-02-20 23:55:09

原文網址 Tom Inglis
2020-02-20 01:34:23

So, I think my ball joint of my build plate is absolutely stuffed with resin, I can't loosen the screw at the top at all. Am I screwed or can I rescue it?

翻譯年糕

Richard Humble
2020-02-20 01:43:26

Tom Inglis
2020-02-20 01:56:45

Ray Sears
2020-02-20 02:06:16

Mark Wardle
2020-02-20 02:09:55

Tom Inglis
2020-02-20 02:10:36

Mark Wardle
2020-02-20 02:12:12

原文網址 Odin Jonez
2020-02-19 01:46:23

Trying out elegoo abs-like transparent. Prints keep failing at the point where the support hits the model. Not always the whole print
Adhesion to the plate seems fine

I am guessing it is user error?
-0.2mm layers at 5.6s
-Chitubox medium supports 74% density with extra light custom ones where needed
-0.25mm contacts at 0.2mm depth.

Any recommendations for support settings

翻譯年糕

Odin Jonez
2020-02-19 01:49:15