Anycubic Photon Printer Owners 造訪社團 » 用戶發文

原文網址 Chris Robinson
2020-02-24 10:15:44

More leveling fun! I've done 3 of the exposure prints. None have worked, but it's getting closer. I discovered that even though I thought the build leveling screw was tight, with a bit of pressure I could move the thing with my hand (once I took it off). I'm hoping that was the issue this last time. The pictures of the level show that the printer is pretty well level. I mean, I don't know how much closer it should be than that. Now it's off to level the build plate... then probably relevel the entire damned printer.

翻譯年糕

Scott Pavlich
2020-02-24 10:17:13

Chris Robinson
2020-02-24 10:21:01

Scott Pavlich
2020-02-24 10:25:54

Scott Pavlich
2020-02-24 10:28:47

Chris Robinson
2020-02-24 10:38:24

Scott Pavlich
2020-02-24 10:48:14

Chris Robinson
2020-02-24 10:48:41

Brad Thomson
2020-02-24 10:54:50

Chris Robinson
2020-02-24 11:00:04

Brad Thomson
2020-02-24 11:02:01

Chris Robinson
2020-02-24 11:02:40

Nipuna Gunarathne
2020-02-24 18:53:41


原文網址 Chris Robinson
2020-02-24 04:48:47

Well at first I thought my first print was a complete and total disaster. There was resin splashed on the glass inside the machine but it doesn't seem as if it got anywhere else. I did not overfill the tank -- the level was well below the line in the tank. Anyway, now I realize that it's only like, 99% a disaster. I printed this, but I have no idea how to read it. Also, is it supposed to be thinner towards the front?
Things I did before I did this print:
Grabbed the .photon file from thingverse. It's for the PHoton S and I have just a Photon, but with the Photon S MB
I did level the print bed after watching several different videos.

The printer is sitting on a stable, level surface.
So what gives here?

翻譯年糕

Lorenzo Di Sante
2020-02-24 04:51:52

Simon Worthington
2020-02-24 04:52:18

Chris Robinson
2020-02-24 04:55:44

Rod Williams
2020-02-24 04:58:36

Chris Robinson
2020-02-24 05:02:43

Joel Mendoza
2020-02-24 05:10:49

Jason Pedersen
2020-02-24 05:11:08

Chris Robinson
2020-02-24 05:21:00

Jacob Hale
2020-02-24 05:30:42

Fred Bey
2020-02-24 06:29:51

Fred Bey
2020-02-24 06:30:43

Chris Robinson
2020-02-24 07:03:54

Peter Ede
2020-02-24 07:17:10

Matthew Stottle
2020-02-24 07:23:06

Patrick Paul
2020-02-24 09:07:51

Chris Robinson
2020-02-24 09:44:03

Chris Robinson
2020-02-24 09:44:52

Nipuna Gunarathne
2020-02-24 16:34:05

Chris Robinson
2020-02-25 06:34:08

Mark Wardle
2020-02-25 23:19:15

Scott Pavlich
2020-02-26 00:21:25


原文網址 Chris Robinson
2020-02-24 02:08:54

So I changed the resin settings to match what the spreadsheet says for the Phton Cube and... holy crap! 10.5 hours to print this? Looks like I won't be printing this today. Anyone have any other suggests for something else that's relatively quick? 3-5 hours, I'm fine with, but more than that, I don't have time for today since I gotta go to bed at some point.

翻譯年糕

Nipuna Gunarathne
2020-02-24 02:11:04

Chris Robinson
2020-02-24 02:11:32

Chris Robinson
2020-02-24 02:12:03

Nipuna Gunarathne
2020-02-24 02:12:54

Joe Gancher
2020-02-24 02:15:09

Chris Robinson
2020-02-24 02:15:53

Chris Robinson
2020-02-24 02:17:36

Nipuna Gunarathne
2020-02-24 02:28:09

Chris Robinson
2020-02-24 02:29:20

Nipuna Gunarathne
2020-02-24 02:30:18

Chris Robinson
2020-02-24 02:36:42

Nipuna Gunarathne
2020-02-24 02:38:27

Chris Robinson
2020-02-24 02:40:27

Nipuna Gunarathne
2020-02-24 02:43:55

Tim Borschel
2020-02-24 03:07:22

Barthels Marvels
2020-02-24 07:36:25


原文網址 Chris Robinson
2020-02-24 01:36:41

I was going to do my first print today of the Anycubic Cube, but 1) I'm using grey resin, so I'm trying to match up the settings in the spread sheet with the settings in Chutibox... it's not 1 to 1 and
2) the estimate is over 6 hours. Is that really how long it takes?

翻譯年糕

Merv Hinton
2020-02-24 01:38:43

Scott Pavlich
2020-02-24 01:38:56

Chris Robinson
2020-02-24 01:39:35

Scott Pavlich
2020-02-24 01:40:10

Scott Pavlich
2020-02-24 01:41:35

Chris Robinson
2020-02-24 01:46:45

Cameron Lee Johnson
2020-02-24 01:49:38

Chris Robinson
2020-02-24 01:50:53

David Kane
2020-02-24 02:37:51

Chris Robinson
2020-02-24 02:41:59

David Kane
2020-02-24 02:50:39

Nipuna Gunarathne
2020-02-24 03:23:57

Jeremiah Chetwood
2020-02-24 13:19:56

Justin Lincoln
2020-02-24 13:27:36

David Kane
2020-02-24 16:13:28

Chris Joy
2020-02-24 16:16:29

Stuart Macmillan
2020-02-24 22:43:59

Chris Robinson
2020-02-25 06:36:41

Chris Robinson
2020-02-25 06:37:05

Stuart Macmillan
2020-02-25 06:39:42

Stuart Macmillan
2020-02-25 06:39:57

Stuart Macmillan
2020-02-25 06:40:46

Chris Robinson
2020-02-25 06:40:47

Stuart Macmillan
2020-02-25 08:31:33

Chris Robinson
2020-02-25 08:42:18


原文網址 Chris Robinson
2020-02-23 01:55:31

Well, looks like this printer is going back. According to information that I found the firmware version which this printer lists as 3.4.1, is NOT for a Photon, but for a Fauxton (according to github). The firmware doesn't appear to be upgradable. Hopefully Amazon will take the thing back. Guess we'll see.

翻譯年糕

Janus Stark
2020-02-23 01:58:03

Chris Robinson
2020-02-23 01:58:53

Janus Stark
2020-02-23 01:59:38

Dane Bennett
2020-02-23 01:59:49

Chris Robinson
2020-02-23 02:01:22

Dane Bennett
2020-02-23 02:04:02

Chris Robinson
2020-02-23 02:04:53

Chris Robinson
2020-02-23 02:05:52

Dane Bennett
2020-02-23 02:07:40

Chris Robinson
2020-02-23 02:10:07

Dane Bennett
2020-02-23 02:13:33

Chris Robinson
2020-02-23 02:15:15

Barthels Marvels
2020-02-23 02:35:02

Barthels Marvels
2020-02-23 02:36:00

Chris Robinson
2020-02-23 02:38:58

Janus Stark
2020-02-23 02:40:24

Barthels Marvels
2020-02-23 02:56:57

Barthels Marvels
2020-02-23 02:57:42

Chris Robinson
2020-02-23 03:06:55


原文網址 Chris Robinson
2020-02-23 01:27:02

Edit: Someone pointed out that this is a Photon S MB, so once I upgraded the firmware with those files it worked fine. Thanks for all the help folks, it's always appreciated.

Could anyone help with this? I just tried to upgrade the firmware on my machine and it won't upgrade. The version it's on is 3.4.1 and the UI is 2.6. I plugged in a USB with the bin and LCD files. My understanding is that the LCD file is supposed run first. It didn't. I tried the .BIN file and it says file format error. Now, I'm trying to go to 4.2.18, so maybe that's too big a jump?

翻譯年糕

Richard Humble
2020-02-23 01:30:23

Chris Robinson
2020-02-23 01:33:49

Scott Pavlich
2020-02-23 13:10:07

Stephen Cimarelli
2020-02-23 13:49:35

Bob Deblier
2020-02-23 13:50:02

Stephen Cimarelli
2020-02-25 16:56:50


原文網址 Chris Robinson
2020-02-22 23:30:17

It looks like my Photon has a firmware version of 3.4.1 (UI is 2.6) AND the thing doesn't read .photon files. I also read that V 4.2.19 is buggy and to use 4.2.18. So can I just jump from the ancient 3.4.1 to the 4.2.18 in one step? Also, will 4.2.18 allow me to read the .photon files?

翻譯年糕


原文網址 Chris Robinson
2020-02-22 10:12:07

Okay a few questions (Shocker, I know):
1) It appears that my photon only reads the pws files, but of course, Chutibox only exports in .photon. Any thoughts on how to convert those?
2) Supposedly you can print that cube thing pretty much right out of the box with no supports -- but running it through Photon Validator shows quite a number of things that need to be fixed -- and some things that can't be auto fixed. I noticed that there's a size listing, like some of these islands are a pixel size... is that something to worry about?
3) My printer did not come with the green resin, but I have grey resin I bought. Do I need to go to the spreadsheet and adjust the STL file for the demo cube?
Thanks!

翻譯年糕

Penn Davies
2020-02-22 10:52:18

Chris Robinson
2020-02-22 11:00:58

Penn Davies
2020-02-22 12:14:12

Chris Robinson
2020-02-22 21:19:23

Penn Davies
2020-02-22 22:17:58

Chris Robinson
2020-02-22 23:02:15

Penn Davies
2020-02-22 23:05:50


原文網址 Chris Robinson
2020-02-21 10:38:59

Huh. Well, apparently the USB reader on the Photon is a wee bit picky. It didn't like my 4gig Sandisk cruzer, but was fine with the 32gig Kingston. And the stick that came with it. Since I don't see a reason to use the 32 gig Kingston, anyone have any recommendations about some 8 or 16 gig sticks that work well?

翻譯年糕

Richard Shapiro
2020-02-21 10:44:23

Dan Hjulberg
2020-02-21 10:56:01

Chris Robinson
2020-02-21 10:57:28

Dan Hjulberg
2020-02-21 11:53:03

Chris Robinson
2020-02-22 06:59:38


原文網址 Chris Robinson
2020-02-21 06:12:49

Edit:Thanks folks! I was just wondering because all the other videos showed a blue plate. Thought maybe this was used.

Just starting to set up this printer. Is the build plate supposed to look like this??

Edit:Thanks朋友們! 我只是想知道, 因為所有其他視訊都顯示了一個藍色的盤子. 想也許這個被使用了.

剛剛開始安裝這個印表機. "如果你知道, 你會知道, 你會是甚麼??

· 查看原文 · 為此翻譯評分

Eduardo Henrique
2020-02-21 06:13:09

Aaron Maynard
2020-02-21 06:13:29

Matt Stone
2020-02-21 06:14:47

Adam Horton
2020-02-21 06:15:50

Philip Bouchon
2020-02-21 06:16:30

Steve Filpansick
2020-02-21 06:17:04

Jarin Udom
2020-02-21 06:17:40

David Minford
2020-02-21 06:19:00

Melecio Guzman
2020-02-21 06:20:46

Chris Robinson
2020-02-21 06:44:26

Kamil Bartosz Bilski
2020-02-21 06:47:34

Stan Westmoreland
2020-02-21 06:58:10

Thientin To
2020-02-21 11:57:48

Eric Orszag
2020-02-21 13:00:47

Bob Deblier
2020-02-21 15:24:17

Tom Sargison
2020-02-21 20:20:02

Clifford Schwankner
2020-02-21 23:03:03


 

討論主題

全不選 常用關鍵字