印完羅馬競技場, 兒子說要把世界著名建築都印一次,所以今天接著印巴黎鐵塔
費時 10:23
明燿黑金
列印參數
; *** Material Settings for Extruder 1 ***
;
; material_name = 3DP 1.75
; g_code_matl = 3B204D617962652073657420736F6D65206D6174657269
; 616C2D737065636966696320472D636F64653F
; fan_Z_mm = 0.4
; fan_loops_percent = 40
; fan_inside_percent = 30
; fan_cool_percent = 40
; temperature_C = 190
; keep_warm_C = 190
; first_layer_C = 190
; bed_C = 0
; sec_per_C_per_C = 0
; flow_min_mm3_per_s = 0.01
; flow_max_mm3_per_s = 10
; destring_suck = 6
; destring_prime = 6
; destring_min_mm = 1
; destring_trigger_mm = 10
; destring_speed_mm_per_s = 40
; destring_suck_speed_mm_per_s = 110
; Z_lift_mm = 0.3
; min_layer_time_s = 0.2
; wipe_mm = 0
; cost_per_cm3 = 0
; flowrate_tweak = 1
; fiber_dia_mm = 1.75
; color = 0
;
; *** Style Settings ***
;
; style_name = Smail Thing
; quality_percentage = 50
; layer_thickness_mm = 0.2
; extrusion_width_mm = 0.375
; num_loops = 2
; skin_thickness_mm = 0.8
; infill_extrusion_width = 0.4
; infill_density_denominator = 5
; stacked_layers = 1
; use_destring = 1
; use_wipe = 1
; use_corners = 1
; loops_insideout = 0
; infill_st_oct_rnd = 1
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 0.2
; seam_gap_scaler = 1
; seam_angle_degrees = 130
;
; *** Support Settings ***
;
; support_name = Raft only
; support_sheathe = 0
; support_density = 0
; solid_interface = 0
; use_lower_interface = 1
; support_inflate_mm = 0
; support_gap_mm = 0.4
; support_angle_deg = 70
; support_z_max_mm = -1
; sheathe_z_max_mm = -1
; raft_mode = 3
; prime_pillar_mode = 1
; raft_inflate_mm = 2
; raft_hi_stride_mm = 1.5
; raft_hi_thick_mm = 0.25
; raft_hi_width_mm = 0.35
; raft_lo_stride_mm = 2.5
; raft_lo_thick_mm = 0.25
; raft_lo_width_mm = 0.5
; brim_mm = 8
; brim_ht_mm = 0.2
; brim_fillet = 1
; interface_band_mm = 2
; interface_extrusion_gain = 1
; interface_Z_gap_mm = 0.1
; raft_interface_layers = 0
翻譯年糕
Morgan Chang
2016-06-19 22:43:28
非常細，清理牽絲很費功
廖新弘
2016-06-19 22:46:55
陳曉澔
2016-06-19 23:01:32
Charlie Ting
2016-06-20 01:24:49
鄭鈞庭
2016-06-20 15:03:00
請問!!你這個部分是怎麼印出來的，我都印不出來...
