Anycubic Photon Printer Owners 造訪社團 » USB

原文網址 Kevin A Thompson
2019-11-20 00:31:56

Hello dudes & dudettes,

Just encountered a few failed prints (wasted resin ... ? ). Had a few error codes on my Anycubic supplied USB stick before this occurred ... think it might be that.

Bought a 3 pack of Philips USB 3.0 32 GB high speed sticks ... did a bit of research & formatted the USB to FAT32. Still won't communicate with my Photon.

Anybody got any recommendations around replacing the USB (i.e. technical specifics, brand, etc.)?

翻譯年糕

Sen Kun
2019-11-20 00:40:17

Jon Carroll
2019-11-20 01:09:39

原文網址 Bastian Alex
2019-11-19 21:00:30

i have 4 usb drives and none of them work, the origonal that came with the photon also doesent work. What to do ? i had one that worked but i cannot seem to find it amywhere.

翻譯年糕

Chris Bondy
2019-11-19 21:02:18

Luke Manser
2019-11-19 21:03:07

Doug Bowman
2019-11-19 21:03:47

Chris Bondy
2019-11-19 21:06:54

Tobias Helwing
2019-11-19 21:08:10

Bastian Alex
2019-11-19 21:30:49

Greg Deboer
2019-11-19 22:26:15

Jason Pacheco
2019-11-19 22:27:37

Bastian Alex
2019-11-19 22:47:42

原文網址 Allan Allison
2019-11-18 16:23:41

Need some help my printer will stop moving up and down but it will still show it printing on the screen but the lcd also stops working same time the build plate stops. Thinking maybe the usb stick is going bad but not sure anyone else encounter this problem?

翻譯年糕

Ian Gill
2019-11-18 17:02:26

Allan Allison
2019-11-18 23:33:11

原文網址 Dalton Brooks
2019-11-18 10:46:53

Couple questions for the group. Have any of you experienced a USB error during your prints? Is this usually an issue with the USB drive it's self or something internal? Do the USB drives have to be formated or should they be compatible out of the packaging if I go to replace the one that came with it? Thanks in advance.

翻譯年糕

John Chrapkowski
2019-11-18 10:47:40

Tim Moulton
2019-11-18 10:49:47

Dalton Brooks
2019-11-18 10:52:42

Dalton Brooks
2019-11-18 10:54:38

Tim Moulton
2019-11-18 10:55:07

Dalton Brooks
2019-11-18 11:39:32

Tim Moulton
2019-11-18 12:08:52

Dalton Brooks
2019-11-18 12:21:20

Tim Moulton
2019-11-18 12:24:20

Dalton Brooks
2019-11-18 12:37:52

原文網址 Jordan Dowley
2019-11-17 22:30:27

hi guys im really not good at this at finding the right answers when i search for it and youtube so i thought id ask the hivemind. ive test printed the cude on the usb but now i want to try a mini, ive tilted it, put in the supports, changed the settings to the right resin, sliced it and put it on a new 16gb usb but when i pop it in the printer i cant find it or i find the file and i cant use it. software is not my strong point can i have some help please?

翻譯年糕

Óttar Freyr Einarsson
2019-11-17 22:32:33

Jordan Dowley
2019-11-17 22:56:29

Hugh Jeriolas
2019-11-18 07:49:19

Jordan Dowley
2019-11-18 08:16:38

Hugh Jeriolas
2019-11-18 08:28:24

Jordan Dowley
2019-11-18 18:20:10

Patrick Haeflinger
2019-11-18 18:26:39

Jordan Dowley
2019-11-18 18:36:55

Patrick Haeflinger
2019-11-18 18:44:33

Jordan Dowley
2019-11-18 18:51:49

Hugh Jeriolas
2019-11-18 22:23:12

Jordan Dowley
2019-11-18 22:23:50

Jordan Dowley
2019-11-19 00:56:19

Jordan Dowley
2019-11-19 00:56:22

Hugh Jeriolas
2019-11-19 02:10:52

Jordan Dowley
2019-11-19 02:37:46

Jordan Dowley
2019-11-19 02:37:59

Jordan Dowley
2019-11-19 06:15:08

原文網址 Marty Khull
2019-11-17 12:03:46

Hi All , I'm having a horror weekend trying to get anything to print . Previously printed parts using the same file on the same usb stick with the same resin . Parts directly on the build plate . Listening to the prints they are stuck to the plate thru the bottom layer stage and then coming off the plate part way thru , or getting all the way thru and getting a bunch of extra print wiping out the last layers . Std Photon using Monocure grey and clear resin with the same results . The "sheet" in the 1st pic measures pretty much spot on with the max X and Y . Not sure if it has any bearing but last weekend when I printed this part temps here were in the high 20's to low 30's C , this weekend has been up in the high 30's . Anyone got any thoughts/ideas ??

翻譯年糕

Tiernan Messmer
2019-11-17 12:18:35

Jason Patterson
2019-11-17 12:27:21

Daniel Randle
2019-11-17 12:30:19

Marty Khull
2019-11-17 12:39:03

Marty Khull
2019-11-17 12:42:12

Tiernan Messmer
2019-11-17 13:47:18

原文網址 Niall Forrester
2019-11-17 00:20:09

Looking for some advice from the experts: having problems with random reboots after first layer is printed..

This is on an original Photon. I have seen the problem a few times before, but recently it is happening >50% of the time I start a print. Basically the print starts as normal, the plate goes down to z=0 and the layer is exposed for the appropriate time (say 80 or 100s). Next the plate either raises slightly or not at all, the printer stops for a few seconds (blank display) then reboots back to the start screen. There is no way to continue the print The first layer has printed fine and is stuck nicely to the plate.
I have done a fair bit of fault-finding. Some observations: It happens with different models. It does not seem to be a corrupt file as it will sometimes work on the second or third attempt with the same file. Have tried three or four different USB sticks. Same problem regardless When the print gets past the first two or three layers, it usually seems to succeed. I have otherwise had very successful prints with nice detail and I am not seeing any problems with levelling etc. I typically do not re-level beween prints, but I have tried doing so and it does not seem to make any difference to this issue. Problem is seen with both 0.02 and 0.05 layer heights.
This weekend, I decided to throw everything at it, and did the following: Updated firmware to 4.2.18 Replaced power brick with a good quality one (from RS online) rated at 12V, 7A Replaced internal USB extension cable (also RS online) Bought new Sandisk USB drive (16Gb), newly formatted with FAT32 Cleaned and carefully lubricated Z-rod with lithium grease. I started a print with a plate full of small parts and it failed as described above. Without changing anything (not even removing USB from slot, or even removing the cured resin from the printer), I started the print again. It failed a second time. As the layers are only 0.02mm, I figured I could get away with one more attempt without removing the cured resin, so again, I restarted the same file on the same USB without changing anything. The first seven or eight layer have gone fine, I could hear the click of the print pulling off the FEP and I hope it is still running. I have done something similar once before and had a perfect print on the second or third attempt. Having worked with fault-finding various machines for most of my working life, I have learned that 'gut-feelings' cannot really be trusted. Having said that, this feels a bit like something is happening when the motor is under most strain (a fair proportion of the plate is covered in support bases, and the cure time is of course extended for the first layers). Considering the things I have already replaced, there isn't much left to try: maybe I can look at reducing the bottom layer times. Otherwise I am worried the problem is with the mainboard (or the motor/driver?)
Any suggestions? 翻譯年糕

Aaron Wiggins
2019-11-17 00:24:41

Niall Forrester
2019-11-17 00:28:22

Brian Todoroff
2019-11-17 01:11:55

Niall Forrester
2019-11-17 01:14:30

原文網址 Sterre Borgers
2019-11-16 22:50:53

Help with file format error.

I just updated my Photon S to the new V5.0.0. In the change log on anycubics website they say that with this update the machine will recognise .photons format besides just the .pws format. At first I was really happy because now I can upgrate my photonS and still use Chitubox. But when I put my USB in the machine it does show the print on the screen in a .photons format. But when I click the print button it says 'file format error'. Why is the .photons format not working?

翻譯年糕

原文網址 Jimmy Louis
2019-11-16 06:38:16

Ok... I took another USB drive that I had laying around and put a file on it and when I put it into the any cubic photon this is what I get....

any solutions?
Thanks

翻譯年糕

Nikola Petrov
2019-11-16 06:45:03

Emilio Jimenez
2019-11-16 06:47:27

Wesley M de Queiroz
2019-11-16 06:48:47

Wesley M de Queiroz
2019-11-16 06:49:40

Tauri Icenogle
2019-11-16 06:52:50

Pa Wel
2019-11-16 06:56:05

Brian L. Billo
2019-11-16 07:16:26

Simon Wilson
2019-11-16 07:19:09

Billy Emmons
2019-11-16 07:19:10

Jimmy Louis
2019-11-16 07:43:33

Jimmy Louis
2019-11-16 07:47:50

Kayo Michiels
2019-11-16 07:55:14

Jimmy Louis
2019-11-16 07:58:14

Gary Houser
2019-11-16 08:15:41

Jimmy Louis
2019-11-16 08:24:09

Jose Alfonso Ortiz
2019-11-16 09:07:43

JP Legris
2019-11-16 09:11:49

Ed Horn
2019-11-16 09:13:05

Jimmy Louis
2019-11-16 09:38:39

Jimmy Louis
2019-11-16 09:40:20

Jimmy Louis
2019-11-16 09:43:04

Vinicius Silva
2019-11-16 09:45:26

JP Legris
2019-11-16 09:46:48

Jimmy Louis
2019-11-16 09:50:07

Jarred Emmett
2019-11-16 09:53:43

Jimmy Louis
2019-11-16 09:59:40

Vinicius Silva
2019-11-16 10:03:04

Vinicius Silva
2019-11-16 10:06:30

Stefan Giudici
2019-11-16 10:15:45

Daniel Randle
2019-11-16 12:36:46

Omar Baez
2019-11-16 14:18:29

Jimmy Louis
2019-11-16 15:10:34

Jimmy Louis
2019-11-16 15:11:27

Jimmy Louis
2019-11-17 00:43:44

Omar Baez
2019-11-17 02:03:12

Brian L. Billo
2019-11-19 22:27:58

Wesley M de Queiroz
2019-11-21 10:56:47

Omar Baez
2019-11-21 10:57:39

Wesley M de Queiroz
2019-11-21 10:58:52

Omar Baez
2019-11-21 11:01:37

Wesley M de Queiroz
2019-11-21 11:08:17

Wesley M de Queiroz
2019-11-21 11:08:37

Omar Baez
2019-11-21 11:15:39

Wesley M de Queiroz
2019-11-21 11:16:19

Wesley M de Queiroz
2019-11-21 11:16:31

Nicolas Tsagarides
2019-11-22 16:40:23

原文網址 Jimmy Louis
2019-11-16 03:16:53

SO... after a year, I've finally taken my Photon out of the shipping box to start experimenting with it (I've been FDM printing and resin always seems to be daunting to me) I think I'm ready for my first print... I've looked at the guides... installed Chitubox... Leveled my bed using the Flint Read method... Set my settings for Anycubic green based on the charts in the software ( I have MonoPrice gray but I'm going to start with the green because I hear translucent is easier to work with)... and I have a couple of questions...

Should I just throw out/erase and repurpose the included USB stick or is there something important on it I should keep?

How accurate is the newest resin exposure chart?

Thanks!!

翻譯年糕

Tony Phalen
2019-11-16 03:18:14

Alan Thomson
2019-11-16 03:20:48

Jimmy Louis
2019-11-16 03:22:52

Jimmy Louis
2019-11-16 03:24:44

James Harrod
2019-11-16 03:25:20

Zena Andreou
2019-11-16 03:27:25

Jim Nelson
2019-11-16 03:29:49

Jon Mitchell
2019-11-16 03:35:34

Billy Emmons
2019-11-16 03:40:08

Tony Phalen
2019-11-16 03:40:49

Billy Emmons
2019-11-16 03:41:37

Jimmy Louis
2019-11-16 03:42:19

Tony Phalen
2019-11-16 03:42:57

Billy Emmons
2019-11-16 03:43:15

Billy Emmons
2019-11-16 03:43:45

Jimmy Louis
2019-11-16 03:46:32

David O'Maolagain
2019-11-16 03:46:53

Jimmy Louis
2019-11-16 03:55:08

Malcolm Goth
2019-11-16 04:09:29

Malcolm Goth
2019-11-16 04:13:15

Selmi Ben Yacoub
2019-11-16 04:18:00

Sen Kun
2019-11-16 04:27:21

Alan Thomson
2019-11-16 04:28:20

Rick Hanson
2019-11-16 04:36:02

Chad N Rachel Dion
2019-11-16 04:41:36

Joe Broggio
2019-11-16 04:43:38

Selmi Ben Yacoub
2019-11-16 04:44:49

Tim Moulton
2019-11-16 04:52:56

Kevin Rank
2019-11-16 04:56:03

Pa Wel
2019-11-16 05:04:19

Richard Syuge
2019-11-16 05:10:31

Steven Raybell
2019-11-16 05:12:02

Smith Hayward
2019-11-16 05:46:34

Smith Hayward
2019-11-16 05:47:50

Eric Sieracki
2019-11-16 07:59:02

Jimmy Louis
2019-11-16 08:32:28

Jimmy Louis
2019-11-16 08:32:45

Miguel A Santiago Jr.
2019-11-16 11:08:04

Daniel Randle
2019-11-16 11:15:58

Andriy Lutsenko
2019-11-16 12:25:53

Rafael Riff Eichenberger
2019-11-16 12:47:04

Daniel Randle
2019-11-16 12:49:05

Wesley Boynton
2019-11-16 12:49:29

Wesley Boynton
2019-11-16 12:49:47

Rafael Riff Eichenberger
2019-11-16 12:53:31

Joshua King
2019-11-16 13:42:21

Selmi Ben Yacoub
2019-11-16 13:44:52

Jimmy Louis
2019-11-16 13:52:00

Jimmy Louis
2019-11-16 14:00:31

Nedgo Kram
2019-11-16 14:10:24

Andriy Lutsenko
2019-11-16 14:58:47

Andriy Lutsenko
2019-11-16 15:12:16

Nicolas Tsagarides
2019-11-16 16:18:34

Tim Vinny
2019-11-16 16:50:28

Dominick Trascritti
2019-11-16 18:31:39

Selmi Ben Yacoub
2019-11-16 19:41:41

Douglas Rector
2019-11-16 22:33:09

Jimmy Louis
2019-11-17 00:18:33

Daniel Randle
2019-11-17 00:18:34

Daniel Randle
2019-11-17 00:21:35

Daniel Randle
2019-11-17 00:32:42

Jimmy Louis
2019-11-17 00:38:22

Daniel Randle
2019-11-17 00:47:57

Robert Hamberger
2019-11-18 03:08:54

Robert Hamberger
2019-11-18 03:09:41

Jimmy Louis
2019-11-18 03:12:54

Jimmy Louis
2019-11-18 03:20:56

Shane Johnson
2019-11-19 14:39:53

全不選發文排行