• 3D列印服務
  • #maker+t=market
  • COSPLAY 3D 建模
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團 » USB

原文網址 Dan Gump
2020-02-18 10:56:02

Hi, could use a bit of assistance tonight.

I have 2 Photon printers. I’m trying to print the exact same file on both of them with the exact same settings. One is printing pretty perfectly and the other one is garbage. Settings are Bottom Layers 8, bottom exposure 90, normal exposure 15s.

Resin is Egloo standard gray and it does look like the center of the failed print on the build plate is a little thinner than the areas around it.

Printer is about 6 weeks old. On firmware 4.2.18. Exposure test looks fine. Have tried multiple USB sticks with same result. Could really use an expert eye. Thanks!

翻譯年糕

Triet Nguyen
2020-02-18 11:00:55

Dan Gump
2020-02-18 11:13:05

Ivan Adhi R
2020-02-18 11:15:50

Dan Gump
2020-02-18 11:18:52

Sean Smith
2020-02-18 11:24:55

Ivan Adhi R
2020-02-18 11:25:07

Ivan Adhi R
2020-02-18 11:26:12

Sean Smith
2020-02-18 11:27:07

Sean Smith
2020-02-18 11:27:43

Ivan Adhi R
2020-02-18 11:29:42

Sean Smith
2020-02-18 11:31:54

Sean Smith
2020-02-18 11:36:04

Janus Stark
2020-02-18 13:31:24

Whitey Lancer
2020-02-18 13:58:50

John Jones
2020-02-18 14:43:26

Richard Humble
2020-02-18 15:47:09

Dan Gump
2020-02-18 20:46:27

Dan Gump
2020-02-18 20:46:32

Sean Smith
2020-02-18 22:40:47

Sean Smith
2020-02-18 22:44:39

Scott Pavlich
2020-02-19 05:02:54

Ivan Adhi R
2020-02-19 09:22:21

Jonathon Michael Starwalt
2020-02-19 16:29:35

Matteo TheGame Giovannetti
2020-02-19 16:54:23


原文網址 Jeremy Mongoose Harris
2020-02-18 09:38:08

Ok. I'm just out of the box, I've leveled the build plat, I've installed the programming.
I'm having problems getting the test print from the USB to the slicer program.
Any pointers?

翻譯年糕

Paul Krzywdik
2020-02-18 09:39:55

Jeremy Mongoose Harris
2020-02-18 09:41:16

Paul Krzywdik
2020-02-18 09:41:54

Jeremy Mongoose Harris
2020-02-18 09:43:05

Paul Krzywdik
2020-02-18 09:44:33

Jeremy Mongoose Harris
2020-02-18 09:45:36

Jason Pedersen
2020-02-18 09:52:08


原文網址 Matthew Overbeck
2020-02-18 07:03:18

Update: it is working again after leaving it unplugged over night. What I think happened was after aborting my last print I pulled the USB before it was done the full abort cycle so the file was stuck in whatever cache is in the printer. I did unplug the machine before but must not have left it unplugged long enough.
Need some help. I unplugged my USB from my printer and the screen showed some error about the USB being removed (I like an idiot did not take a picture of what it said). But as I had just removed it I just closed it and moved on. Now my printer will not read the files on my USB. It detects them but when I click print it says failed to open file. I have tried 2 USB stick that were both working using files that worked before, I am running 5.0.2 firmware version. Time for a service ticket or has anyone seen this before and knows how to fix i?

更新: 它在晚上拔掉插頭後, 它再次起作用. 我想發生的事情是在取消我的最後一張列印後, 我在完成整個墮胎週期之前就拔了usb, 所以檔案卡在印表機里的任何快取中. 我之前確實拔掉了機器, 但肯定沒有把它拔掉足夠長的時間.
需要一些幫助. 我從印表機拔出了我的usb, 螢幕顯示了一些關於usb被移除的錯誤(我喜歡一個白癡沒有照). 但是, 我剛剛刪除了它, 我剛剛關閉它並繼續前進. 現在我的印表機不會讀到我的usb上的檔案. 它檢測到它們, 但當我點選列印時, 它說無法開啟檔案. 我試過2個usb棒, 這兩個都在使用之前工作的檔案, 我運行5.0.2個固件版本. 該買張服務票了, 或者有人看過這個, 知道如何修復我嗎?

· 查看原文 · 為此翻譯評分

James Hendrix
2020-02-18 07:09:05

James Hendrix
2020-02-18 07:09:36

Regan Fairbanks
2020-02-18 07:11:59

Matthew Overbeck
2020-02-18 07:16:32

James Hendrix
2020-02-18 07:22:05

Matthew Overbeck
2020-02-18 07:36:22

Regan Fairbanks
2020-02-18 07:44:22

Matthew Overbeck
2020-02-18 07:50:21

Matthew Overbeck
2020-02-18 07:52:08


原文網址 Steven Nichols
2020-02-17 08:14:18

So still having issues! Any suggestions please?

So far I have tried turning off and on again ... updating to 4.2.19 ... reformatting the original USB. And I’m still getting print fails ? tomorrow I will be trying a different USB drive I have lying around (can anyone recommend 1 if it’s the USB drive)

I’m using the standard photon.

翻譯年糕

Paul West
2020-02-17 08:25:06

Steven Nichols
2020-02-17 08:27:51

Paul West
2020-02-17 08:28:39

Steven Nichols
2020-02-17 08:29:01

Fraser Loki Clark
2020-02-17 08:48:50

Fraser Loki Clark
2020-02-17 08:50:24

Steven Nichols
2020-02-17 08:51:03

Fraser Loki Clark
2020-02-17 08:51:26

Justin Marks
2020-02-17 08:51:46

Steven Nichols
2020-02-17 08:52:09

Steven Nichols
2020-02-17 08:52:36

Fraser Loki Clark
2020-02-17 08:53:40

Richard Humble
2020-02-17 12:54:43

Steven Nichols
2020-02-17 16:30:12

Richard Humble
2020-02-17 16:35:41

Steve Stagg
2020-02-17 22:13:48


原文網址 David Dunham
2020-02-16 10:24:16

Does anyone know what causes this to happen? When I print anything, after a short time the printer starts doing this with the LEDs, resulting in a large block of resin the size of the LCD screen being printed. If I turn the printer off and on again it works fine for a short time. I have tried different models and different USB drives. I've had the printer 6 months and only printer a handful of times.

翻譯年糕

Jon Geiger
2020-02-16 10:28:55

Justin Marks
2020-02-16 10:29:11

Justin Marks
2020-02-16 10:29:28

David Dunham
2020-02-16 10:40:44

Justin Marks
2020-02-16 11:48:16

Janus Stark
2020-02-16 16:11:22


原文網址 Ranyle Singh
2020-02-16 09:19:28

Hello guys.
I've searched on here and tried what i could find as well as Google and github.

No usb's work. No files work. Including renaming.
Including updating firmware files, so I can't update.
This is what I get for all files.
Tried opening and plugging directly to motherboard.
Tried powering off and unplugging.

Any other suggestions?

翻譯年糕

Vincent Balmont
2020-02-16 09:29:24

Brian Pence
2020-02-16 09:29:33

Ranyle Singh
2020-02-16 09:32:05

Damith Rajapaksha
2020-02-16 09:55:33

Ranyle Singh
2020-02-16 10:06:49

Ranyle Singh
2020-02-16 10:07:24

Chris Poyner
2020-02-16 10:11:17

Ranyle Singh
2020-02-16 10:12:42

Ranyle Singh
2020-02-16 10:40:30

Brian King
2020-02-16 12:05:44

Ranyle Singh
2020-02-16 12:07:07

Ranyle Singh
2020-02-16 16:00:33

Carla Birch
2020-02-16 18:10:41

Janus Stark
2020-02-16 20:15:06

Joshua McBride
2020-02-17 00:48:29

Ranyle Singh
2020-02-17 05:56:01


原文網址 Todd Norton
2020-02-16 01:54:19

Just got my Photon today. New to SLA, but not FDM. Doing a test print right off the USB. Should each layer stick to the FEP when printing?

翻譯年糕

Harm Cremer
2020-02-16 01:55:35

Todd Norton
2020-02-16 01:56:19

Harm Cremer
2020-02-16 01:56:58

Kayla Keith
2020-02-16 02:01:18

Kyle Telechan
2020-02-16 02:03:26

Todd Norton
2020-02-16 02:27:38

Andrew Rosenthal
2020-02-16 02:44:11


原文網址 Markus M. Gray
2020-02-14 22:35:19

Hi all, so I just bought two photon printers used from a dental office and tried to run a test print on them but for some reason the files aren't being picked up from the USB. I generated the print files using the Photon Slicer from the website but no luck, I tried with two USBs I had and a new one.

翻譯年糕

Paul West
2020-02-14 22:41:05

Markus M. Gray
2020-02-14 22:51:57

Paul West
2020-02-14 22:52:52

Markus M. Gray
2020-02-14 22:53:21

Paul West
2020-02-14 22:54:14

Markus M. Gray
2020-02-14 22:58:10

Paul West
2020-02-14 23:01:41

Markus M. Gray
2020-02-14 23:20:02

Markus M. Gray
2020-02-14 23:20:07

Markus M. Gray
2020-02-14 23:46:31

Paul West
2020-02-14 23:47:46


原文網址 Bruce Piggott
2020-02-14 17:56:43

Some times even after cleaning with IPA you get weeping from the drain holes in hollow prints. This because the uncured resin on the inside forms an emulsion with the IPA. The UV lamp can't reach the inside so it remains a liquid. I have solved this problem by inserting a UV LED through the drain holes for about 5 minutes. This hardens the internal emulsion.
You can make your own UV light by utilising a USB powered plug and old USB cable. A 147 ohm resistor and a 5mm UV LED. I attach a picture of the circuit. If you are not up to making your own I may be able to help. Hope this helps. Cheers. Bruce

有些時候, 即使在用ipa打掃乾淨後, 你也會從空洞里哭泣. 這是因為內部未治癒的樹脂與ipa形成模仿. 紫外線燈無法到達內部, 所以它仍然是液體. 我已經解決了這個問題, 在排水溝裡插入了大約5分鐘的紫外線. 這讓內部模仿變得更加困難.
你可以使用usb動力插頭和舊usb電纜製作你自己的紫外線. 一個147 ohm的電阻器和5毫米紫外線led. 我附上電路的照片. 如果你不能自己做, 我可能會幫忙. 希望這有幫助. 乾杯. 布魯斯

· 查看原文 · 為此翻譯評分

Reb O'Rourke
2020-02-14 18:09:31

Bruce Piggott
2020-02-14 18:34:58

Peter Ede
2020-02-14 19:41:13

Bruce Piggott
2020-02-14 20:18:06

Warpy Pagan
2020-02-14 20:55:35

Mark Eberle
2020-02-14 21:34:44

Bruce Piggott
2020-02-14 22:23:43

Gary Houser
2020-02-14 23:32:45

Thor Corgard
2020-02-14 23:49:22

Phil Hays
2020-02-15 00:41:28

Stefan Giudici
2020-02-15 14:20:06

Bruce Piggott
2020-02-15 16:13:33

Saša Sinek
2020-02-15 19:03:24

Chris Holden
2020-02-15 19:34:07

Bruce Piggott
2020-02-15 21:45:29

Chris Visser
2020-02-16 03:06:58

Bruce Piggott
2020-02-17 16:53:24


原文網址 Wayne Peters
2020-02-14 17:09:20

Okay, so this is the second machine in a row which, after very little use has suffered the 11800 curse. (Where it crashes mid print because it mistakenly thinks the USB stick has been removed)
I've updated the firmware. I've tried multiple USB sticks and plugged them directly into the mother board. All to no avail.
Here's something odd, though. If I run a dry print (with no resin in the vat) it runs perfectly. Once I add resin I get 11800 sometimes as late as 80% through.
Current theory: vibration of cured resin being pulled from the vat causing a disconnect which suggests a physical fault somewhere.
Is there anything else I can try before I send this one back as well?

翻譯年糕

Andrew Steel
2020-02-14 17:45:11

Wayne Peters
2020-02-14 18:11:46

Wayne Peters
2020-02-14 18:21:36

Wayne Peters
2020-02-14 18:48:10

Wayne Peters
2020-02-14 18:49:04

Andrew Steel
2020-02-14 18:55:23

Wayne Peters
2020-02-14 19:11:38

Niall Forrester
2020-02-14 19:12:42

Wayne Peters
2020-02-14 19:14:49

Niall Forrester
2020-02-14 19:23:40

Chris Bondy
2020-02-14 19:34:46

Wayne Peters
2020-02-14 19:39:25

Wayne Peters
2020-02-14 19:42:21

Wayne Peters
2020-02-14 19:44:59

Chris Bondy
2020-02-14 19:45:04

Chris Bondy
2020-02-14 19:46:25

Niall Forrester
2020-02-14 20:52:52

Niall Forrester
2020-02-14 20:54:32

Wayne Peters
2020-02-15 00:45:04


 

全不選 發文排行